M S I R G 3 0 0 E X （ L i t e )

9. In the field ‘LAN IP-address you can fill in the IP-address of the computer for which you want to open

the specific ports.

10. Select the correct protocol in the ‘Protocol’ field.

11. Fill in the necessary ports at the ‘External port’ field. Fill in the start or begin port in the first field. In

the second field you can fill in the end port. In case you only need to open one ports, you can fill in the

same port number in both fields.

12. Fill in the same port number in the ’Internal Port’ field.

13. Fill in a name in the ‘Rule Name’ field. For Example: Fill in the name of the application or game you

want to open these ports for.

14. Click ‘Add’ to save the settings.

6.2 Setting up QoS

Page 50 of 52

M S I R G 3 0 0 E X （ L i t e )

Thanks to QoS (Quality Of Service) you can make sure that a specific program or computer gets priority

above other programs. By using this feature, you are certain that you will not get ‘lag’ in games of hitches

during video playback, in case one of the computers starts to download. Setting up Qos differs per situation.

Therefore we will explain how to setup Qos in a general way.

1. Open your internet browser (e.g. Internet Explorer, Netscape or Firefox).

2. Type ‘

’ in the address bar.

3. Press the enter key or click ‘Go to’.

4. You will now be asked for a ‘Username’ and a ‘Password’. Fill in ‘admin’ in the

‘

Username’ field and

‘admin’ in the ‘Password’ field and press the ‘Enter’ key.

5. The login screen is shown

6. Click ‘Setup Tool’.

7. Click ‘Advanced Setup’ in the left menu.

8. Click ‘Traffic’.

9. Click ‘QoS Setup’.

10. Place a mark at the option ‘Start’ at the right screen.

11. Fill in the speeds of your internet connection at ‘Download and Upload’. If you do not know these

speeds look at the yellow ‘Hint’ field for a brief explanation.

Page 51 of 52

M S I R G 3 0 0 E X （ L i t e )

12. Click ‘Apply’ to activate these basic settings.

Hint: If you do not exactly know the speed of your internet connection, please contact your Internet

Service Provider. Your provider will usually speak in term of MB. This value is in Mbite. 1 MB=1024 Kbit.

You can use both values in the webpage of the router.

To set up a rule, use the following steps:

1. Choose ‘User Defined’ at the ‘QoS Setup’ field’.

2. Choose ‘Max Limit’ to set the maximum speed limit.

3. Choose ‘Min Guarantee’ to set a minimal guaranteed speed.

4. Fill in a value in the ‘Download’ and ‘Upload’ field.

5. Fill in the IP-address or IP-area in the ‘IP’ field for which this rule is applied.

6. Fill in the protocol in the ‘Protocol’ field. (If unknown, leave this field empty.)

7. Fill in the port numbers at the ‘External Port’ field. (If unknown, leave this field

empty.)

8. Click ‘Apply’ to add this rule.

Page 52 of 52