Page 131 / 160
Scroll up to view Page 126 - 130
21
Chapter
Chapter 21
TR-069 Client
131
C
HAPTER
21
Chapter 21
TR-069 Client
21.1
The TR-069 Screen
Click
Maintenance > TR-069 Client
to open the following screen. Use this screen to configure your
Router to be managed by an ACS.
Figure 76
Maintenance > TR-069 Client
Table 72
Maintenance > TR-069 Client
LABEL
DESCRIPTION
CWMP
Select
Enable
to allow the Router to be managed by a management server. Otherwise,
select
Disable
to not allow the Router to be managed by a management server.
ACS URL
Enter the URL or IP address of the auto-configuration server.
ACS User
Name
Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
Enter the TR-069 password for authentication with the auto-configuration server.
Connection
Request Path
Type the IP address or domain name of the
Router
. The management server uses this path
to verify the
Router
.
Page 132 / 160
Chapter 21
TR-069 Client
132
Connection
Request Port
The default port for access to the Router from the management server is the HTTP port,
port 80. If you change it, make sure it does not conflict with another port on your network
and it is recommended to use a port number above 1024 (not a commonly used port). The
management server should use this port to connect to the Router. You may need to alter
your NAT port forwarding rules if they were already configured.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the Router, this user name is used to
authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the Router, this password is used to
authenticate the ACS.
Inform
Select
Enable
for the Router to send periodic inform via TR-069 on the WAN. Otherwise,
select
Disable
.
Inform
Interval
Enter the time interval (in seconds) at which the Router sends information to the auto-
configuration server.
Table 72
Maintenance > TR-069 Client (continued)
LABEL
DESCRIPTION
Page 133 / 160
22
Chapter
Chapter 22
System
133
C
HAPTER
22
Chapter 22
System
22.1
The System Screen
Use the
System
screen to configure the system’s inactivity time-out interval.
Click
Maintenance > System
to open the following screen.
Figure 77
Maintenance > System
Table 73
Maintenance > System
LABEL
DESCRIPTION
Administrator
Inactivity Timer
Type how manyseconds a management session (either via the web configurator) can be
left idle before the session times out. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Page 134 / 160
23
Chapter
Chapter 23
Time Setting
134
C
HAPTER
23
Chapter 23
Time Setting
23.1
The Time Setting Screen
To change your Router’s time and date, click
Maintenance > Time
. The screen appears as shown.
Use this screen to configure the Router’s time based on your local time zone.
Figure 78
Maintenance > Time Setting
Table 74
Maintenance > System > Time Setting
LABEL
DESCRIPTION
Current Time
This field displays the date and time of your Router.
Manual
Select this to enter the time and date manually in hh:mm:ss and yyyy/mm/dd format.
Get from Time
Server
Select this to have the Router get the time automatically from a time server.
Time Server
Address 1, 2
Enter the IP address or URL (up to 31 extended ASCII characters in length) of your
time server. Check with your ISP/network administrator if you are unsure of this
information.
Time Zone
Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Page 135 / 160
Chapter 23
Time Setting
135
Daylight Savings
Daylight saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the
evening. Select this option if you use Daylight Saving Time.
Start/End Date
Configure the day and time when Daylight Saving Time starts/ends if you selected
Daylight Savings
. The
o'clock
field uses the 24 hour format.
Table 74
Maintenance > System > Time Setting (continued)
LABEL
DESCRIPTION
19216811.live