Page 6 / 76
Scroll up to view Page 1 - 5
MWN-WAPR150N Wireless Router
WMM support can smooth your MSN voice, and the included
Setup Wizard on CD-ROM will be quick and easy for
non-savvy users to install the device and access the Internet.
1.1 Product Features
¾
Includes router, wireless access point, four-port switch
and firewall in one
¾
Provides up to 150Mbps uploading and downloading
speed
¾
Supports two WPS (Wi-Fi Protected Setup) encryption
methods: PBC and PIN
¾
Compliant to IEEE802.11n, IEEE802.11g, IEEE802.11b,
IEEE802.3 and IEEE802.3u standards
¾
Supports 64/128-bit WEP, WPA, WPA2, WPA&WPA2
encryption methods
¾
Supports RTS/CTS protocol and data partitioning
function
¾
Provides one 10/100Mbps Auto-Negotiation Ethernet
WAN port
¾
Provides four 10/100Mbps Auto-Negotiation Ethernet
LAN ports
¾
Supports xDSL/Cable MODEM, static and dynamic IP in
community networking
¾
Supports remote/local Web management
2
Page 7 / 76
MWN-WAPR150N Wireless Router
¾
Supports WMM to better smooth your voice and video
¾
Supports SSID stealth mode and access control based
over MAC address (up to 30 entries)
¾
Supports Auto MDI/MDIX
¾
Supports wireless Roaming technology for high-efficient
wireless connections
¾
Supports
auto
negotiation/manual
mode
for
802.11b/802.11g/802.11n
¾
Supports UPnP and DDNS
¾
Supports Firefox 1.0, IE5.5 or above
¾
Supports SNTP
¾
Supports virtual server, DMZ host
¾
Built-in firewall for hacker's attack prevention
¾
Supports DHCP server/client
¾
Supports auto wireless channel selection
¾
Supports LAN access control to the Internet
¾
Provides syslog to record the status of the router
¾
Supports WDS wireless network extension
¾
Supports QoS function
¾
Built-in omni-directional antenna
1.2 Package Contents
Please unpack the box and check the following items:
¾
One MWN-WAPR150N Wireless Broadband Router
¾
One Quick Installation Guide
3
Page 8 / 76
MWN-WAPR150N Wireless Router
¾
One Power Adapter
¾
One Network Cable
¾
One CD-ROM
If any of listed items are missing or damaged, please contact
the Medialink reseller from whom you purchased for
replacement immediately.
1.3 LED Indicator and Port Description
Front Panel and LED Indicator Show
LED indicator description on front panel (from L to R)
POWER
Solid indicates the power is connected and on.
SYS
Blinking indicates the system running.
WPS
When blinking, it indicates the device is negotiating with
4
Page 9 / 76
MWN-WAPR150N Wireless Router
client in WPS mode.
INTERNET (WLAN)
Wireless signal LED indicator. Blinking indicates the
wireless function is enabled.
LAN (4, 3, 2, 1)
Wired local network LED indicator. Solid indicates it is
connected with Ethernet device and the device is turned
on; blinking indicates the device is transmitting and/or
receiving data.
WAN
Wide area network indicator. Solid indicates the Router’s
WAN port is connected and working; blinking indicates
the port is being transmitted and received data packets.
5
Page 10 / 76
MWN-WAPR150N Wireless Router
Back Panel Show
：
Rear Panel
From L to R
：（
）
POWER
The jack is for power adapter connection. Please use the
included 9V DC power adapter.
WAN
A 100Mbps Ethernet port, can be connected with MODEM,
Switch, Router and other Ethernet device for Internet
connecting to DSL MODEM, Cable MODEM and ISP.
LAN (1, 2, 3, 4)
4 10/100Mbps Ethernet ports can be connected with
Ethernet switch, Ethernet router and NIC card.
RESET
The system reset button (recessed). Use a small
non-metallic object to press this button for 7 seconds.
The settings configured in this device will be deleted and
it will restore the settings to the default.
WLAN/WPS
WPS button. Press it for 1 second, the WPS feature will
be enabled and WPS indicator will be shown blinking.
6
19216811.live