26

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750

Vers: 022515

NOTE:

When selecting the Channel Width option 20/40MHz, a second

Channel option will appear allowing you to set if the secondary

channel used by 40MHz is below or above your current Channel.

±

5GHz Options:

Displays the 5GHz Wireless options active on the Router.

w

Wireless Radio:

Allows you to Enable or Disable the 5GHz Wireless Radio in the

Router. Enabled is the default setting.

w

Wireless Mode:

Allows you to specify the 802.11 Wireless mode to which the

5GHz Radio will operate. Supported modes include 802.11ac+n+a and 802.11a.

802.11ac+n+a is the default and recommended setting.

w

Channel Width:

Allows you to specify the 5GHz Channel Width used by the

Router. Supported widths include 20/40/80MHz Auto and 20MHz. 20/40/80MHz

Auto is the default setting. When selecting the Wireless Mode 802.11a, the Channel

Width is forced to 20MHz only.

w

Channel:

Allows you to specify the Channel used by the 5GHz Radio in the Router.

Supported Channels will change depending on the Wireless Mode. 802.11ac+n+g

offers 40 and 153, while 802.11a offers 36, 40, 44, 48, 149, 153, 157, 161 and 165 (the

available options are non-overlapping channels). 153 is the default setting.

w

Save:

This button is used to Save the configuration changes made on this page.

Once you have clicked Save, you may move to other pages in the Router setup.

Most changes will require a Reboot to allow the changes to take effect.

w

Reboot:

This button is used to Reboot the Router after making configuration

changes or can be used to Reboot the Router for any reason.

w

Cancel:

This button Cancels any changes made on this page.

NOTE:

After making any changes to Wireless Settings you must click the

Save button to Save your changes, then you must click the Reboot

button for the changes to take effect. You can click the Save button

and proceed to other pages without losing your configured changes.

3.4.2 Profiles

This menu displays the Wireless Profile options for 2.4GHz and 5GHz on the Router.

3.4.2.1 2.4GHz

27

User Guide

© 2015

Luxul. All Rights Reserved.

Other trademarks and registered trademarks are the property of their respective owners

This page displays the 2.4GHz Profile Settings on the Router.

Select the menu

Wireless>>Profiles>>2.4GHz

to display the following page:

±

Profile List:

Displays the 2.4GHz Wireless Profiles active on the Router.

w

SSID:

Allows you to select the Profile you would like to Edit or to Create a new

Profile. Select an SSID in the dropdown list.

w

Enable/Disable SSID:

Allows you to Enable or Disable the SSID. Enabled is the

default setting.

w

Operating Mode:

Allows you to select the Operating Mode of the SSID. Access

Point is the default setting.

w

Network Name (SSID):

Allows you to specify the Network Name (SSID) used to

identify the Wireless Network to client devices.

w

SSID Broadcast:

Allows you to Enable or Disable the SSID Broadcast. Enabled is the

default setting.

w

Security Mode:

Allows you to set the desired Security Mode used to connect

to the SSID. Supported modes include 64bit/128bit WEP, WPA, WPA2 and WPA/

WPA2 Mixed. Open is the default setting. We strongly recommend adding Security

to all SSIDs.

w

WEP Key:

When selecting WEP Security, a WEP key option will appear. This allows

you to set the WEP Key, it can consist of Numbers 0-9 and Letters A-F. For 64bit

WEP, enter 10 hexadecimal digits (0-9 and A-F) or 5 regular characters. For 128bit

WEP enter 26 hexadecimal digits (0-9 and A-F) or 13 regular characters.

28

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750

Vers: 022515

w

Encryption:

When selecting WPA or WPA2 security, two options will appear. The

first is Encryption, which allows you to set the Encryption type used by WPA/

WPA2. Options include AES, TKIP&AES and TKIP. AES is the default and recom-

mended setting.

w

WPA Passphrase:

When selecting WPA or WPA2 security, two options will appear.

The second is WPA Passphrase, which allows you to set the Passphrase used to

connect to the SSID. WPA Passphrases must be a minimum of 8 to a maximum of

63 Characters and can contain Letters (capitol and lowercase), Numbers, Special

Characters and Spaces.

w

Save:

This button is used to Save the configuration changes made on this page.

Once you have clicked Save, you may move to other pages in the Router setup.

Most changes will require a Reboot to allow the changes to take effect.

w

Reboot:

This button is used to Reboot the Router after making configuration

changes or can be used to Reboot the Router for any reason.

w

Cancel:

This button Cancels any changes made on this page.

w

Delete:

Allows you to Delete the current SSID selected. Once you have clicked

Delete, you may move to other pages in the Router setup. Delete will require a

Reboot to allow the changes to take effect.

NOTE:

After making any changes to a Wireless Profile you must click the

Save or Delete buttons to Save your changes, then you must click the

Reboot button for the changes to take effect. You can click the Save

or Delete button and proceed to other pages without losing your

configured changes.

NOTE:

WPA/WPA2 with TKIP&AES Encryption Security mode is

recommended for high turnover environments like Restaurants or

Hotels. This mode covers the widest range of devices.

NOTE:

WEP Security is not recommended due to the Security being

inherently insecure. WEP is only recommended when devices do not

support WPA.

3.4.2.2 5GHz

29

User Guide

© 2015

Luxul. All Rights Reserved.

Other trademarks and registered trademarks are the property of their respective owners

This page displays the 5GHz Profile Settings on the Router.

Select the menu

Wireless>>Profiles>>5GHz

to display the following page:

±

Profile List:

Displays the current 5GHz Wireless Profiles active on the Router.

w

SSID:

Allows you to select the Profile to Edit or to Create a new Profile. Select an

SSID in the dropdown list.

w

Enable/Disable SSID:

Allows you to Enable or Disable the SSID. Enabled is the

default setting.

w

Operating Mode:

Allows you to select the Operating Mode of the SSID. Access

Point is the default setting.

w

Network Name (SSID):

Allows you to specify the Network Name (SSID) used to

identify the Wireless Network to client devices.

w

SSID Broadcast:

Allows you to Enable or Disable the SSID Broadcast. Enabled is the

default setting.

w

Security Mode:

Allows you to set the desired Security Mode used to con-

nect to the SSID. Supported modes include 64bit/128bit WEP, WPA, WPA2 and

WPA/WPA2 Mixed. Open is the default setting. Adding Security to all SSIDs is

recommended.

w

WEP Key:

When selecting WEP Security a WEP key option will appear. This allows

you to set the WEP Key. It can consist of Numbers 0-9 and Letters A-F. For 64bit

WEP, enter 10 hexadecimal digits (0-9 and A-F) or 5 regular characters. For 128bit

WEP, enter 26 hexadecimal digits (0-9 and A-F) or 13 regular characters.

30

XWR-1750

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XWR-1750

Vers: 022515

w

Encryption:

When selecting WPA or WPA2 security, two new options will appear.

The first is Encryption, which allows you to set the Encryption type used by WPA/

WPA2. Options include AES, TKIP&AES and TKIP. AES is the default and recom-

mended setting.

w

WPA Passphrase:

When selecting WPA or WPA2 security two new options will

appear. The second is WPA Passphrase, which allows you to set the Passphrase used

to connect to the SSID. WPA Passphrases must be a minimum of 8 to a maximum

of 63 Characters and can contain Letters (capitol and lowercase), Numbers, Special

Characters and Spaces.

w

Save:

This button is used to Save the configuration changes made on this page.

Once you have clicked Save, you may move to other pages in the Router setup.

Most changes will require a Reboot to allow the changes to take effect.

w

Reboot:

This button is used to Reboot the Router after making configuration

changes or can be used to Reboot the Router for any reason.

w

Cancel:

This button Cancels any changes made on this page.

w

Delete:

Allows you to Delete the current SSID selected. Once you have clicked

Delete, you may move to other pages in the Router setup. Delete will require a

Reboot to allow the changes to take effect.

NOTE:

After making any changes to a Wireless Profile you must click the

Save or Delete buttons to Save your changes, then you must click the

Reboot button for the changes to take effect. You can click the Save

or Delete button and proceed to other pages without losing your

configured changes.

NOTE:

WPA/WPA2 with TKIP&AES Encryption Security mode is

recommended for high turnover environments like Restaurants or

Hotels. This mode covers the widest range of devices.

NOTE:

WEP Security is not recommended due to the Security being

inherently insecure. WEP is only recommended when devices do not

support WPA.