Linksys X1000 Router Manual PDF (Setup & Configuration Guide)

Page 171 / 678 Scroll up to view Page 166 - 170

16

Advanced Configuration

Linksys X1000

WPA2 Enterprise

This option features WPA2 used in coordination with a RADIUS server° (This

should only be used when a RADIUS server is connected to the router°)

NOTE

If you select WPA2 Enterprise as your Security Mode, each device

in your wireless network MUST use WPA2 Enterprise and the same

shared key°

RADIUS Server

Enter the IP address of the RADIUS server°

RADIUS Port

Enter the port number of the RADIUS server° The default is

1812

°

Shared Key

Enter the key shared between the router and the server°

WPA Enterprise

This option features WPA used in coordination with a RADIUS server° (This

should only be used when a RADIUS server is connected to the router°)

NOTE

If you select WPA Enterprise as your Security Mode, each device

in your wireless network MUST use WPA Enterprise and the same

shared key°

RADIUS Server

Enter the IP address of the RADIUS server°

RADIUS Port

Enter the port number of the RADIUS server° The default is

1812

°

Shared Key

Enter the key shared between the router and the server°

WEP

WEP is a basic encryption method, which is not as secure as WPA°

NOTE

If you select WEP as your Security Mode, each device in your

wireless network MUST use WEP and the same encryption and

shared key°

Encryption

Select a level of WEP encryption,

(40/64-bit 10 hex digits)

or

104/128-bit (26 hex digits)

° The default is

40/64-bit (10 hex digits)

°

Passphrase

Enter a passphrase to automatically generate the WEP key° Then

click

Generate

°

Key 1

If you did not enter a passphrase, enter the WEP key manually°

Page 172 / 678

17

Advanced Configuration

Linksys X1000

RADIUS

This option features WEP used in coordination with a RADIUS server° (This

should only be used when a RADIUS server is connected to the router°)

NOTE

If you select RADIUS as your Security Mode, each device in your

wireless network MUST use RADIUS and the same encryption and

shared key°

RADIUS Server

Enter the IP address of the RADIUS server°

RADIUS Port

Enter the port number of the RADIUS server° The default is

1812

°

Shared Key

Enter the key shared between the router and the server°

Encryption

Select a level of WEP encryption,

(40/64-bit 10 hex digits)

or

104/128-bit (26 hex digits)

° The default is

40/64-bit (10 hex digits)

°

Passphrase

Enter a passphrase to automatically generate the WEP key° Then

click

Generate

°

Key 1

If you did not enter a passphrase, enter the WEP key manually°

Disabled

If you choose to disable wireless security, you will be informed that wireless

security is disabled when you first attempt to access the Internet° You will given

the option to enable wireless security, or confirm that you understand the risks

but still wish to proceed without wireless security°

NOTE

When wireless security is disabled, anyone can access your wireless

network at any time°

Wireless > Guest Access

The Guest Access feature allows you to provide guests visiting your home with

Internet access via wireless° The guest network is a wireless network separate

from your local network° The Guest Access feature does not provide access to

the local network and its resources, so your guests will not have access to your

computers or personal data° For example, the guest computer cannot print to

a printer on the local network or copy files to a computer on the local network°

This helps minimize exposure of your local network°

NOTE

To learn more about any field, click

Help

on the right side of the

screen°

Page 173 / 678

18

Advanced Configuration

Linksys X1000

Guest Access

Allow Guest Access

To allow Internet access through a guest network, keep

the default,

yes

° Otherwise, select

no

°

Guest Network Name

The default is the name of your wireless network,

followed by

-guest

°

Guest Password

The default is

guest

° If you used the setup software for

installation, then the default is changed to a unique password°

Change

Click this option to change the Guest Password° The

Change Guest

Password

screen appears°

Change Guest Password

•

Enter a new guest network password

Enter a password of 4-32 characters°

Then click

Change

to save the new password and return to the

Guest Access

screen°

Total Guests Allowed

By default,

5

guests are allowed Internet access through

the guest network° Select the number of guests you want to allow on your

guest network°

SSID Broadcast

When wireless devices survey the local area for wireless

networks to associate with, they will detect the SSID (wireless network name)

broadcast by the router° To broadcast the SSID of the guest network, keep

the default,

Enabled

° If you do not want to broadcast the SSID of the guest

network, then select

Disabled

°

Guest Instructions

When a guest wants Internet access in your home, provide these instructions:

1.

On the guest computer, connect to the wireless guest network named

on the

Guest Access

screen°

2.

Open a web browser°

3.

On the login screen, enter the password displayed on the

Guest Access

screen°

4.

Click

Login

°

Page 174 / 678

19

Troubleshooting

Linksys X1000

19

X1000

Your computer cannot connect to the Internet.

Follow the instructions until your computer can connect to the Internet:

•

Make sure that the Modem Router is powered on° The Power LED should

be green and not flashing°

•

If the Power LED is flashing, then power off all of your network devices,

including the Modem Router and computers° Then power on each device

in the following order:

a.

Modem Router

b.

Computer

•

Check the LEDs on the device’s front panel° Make sure the Power, DSL,

and at least one of the numbered Ethernet LEDs are lit° If they are not,

then check the cable connections° The computer should be connected to

one of the Ethernet ports numbered 1-3 on the device, and the device’s

DSL port must be connected to the ADSL line°

When you double-click the web browser, you are prompted for a user name

and password. If you want to get rid of the prompt, follow these instructions.

Launch the web browser and perform the following steps (these steps are

specific to Internet Explorer but are similar for other browsers):

1.

Select

Tools

>

Internet Options

°

2.

Click the

Connections

tab°

3.

Select

Never dial a connection

°

4.

Click

OK

°

You are using a static IP address and cannot connect.

Refer to Windows Help and

change your Internet Protocol (TCP/IP) Properties

to Obtain an IP address automatically°

The computer cannot connect wirelessly to the network.

Make sure the wireless network name or SSID is the same on both the computer

and the device° If you have enabled wireless security, then make sure the same

security method and key are used by both the computer and the device°

You need to modify the basic settings on the device.

Run the Setup Wizard on the Setup CD-ROM°

You need to modify the advanced settings on the device.

Open the web browser (for example, Internet Explorer or Firefox), and enter the

device’s IP address in the address field (the default IP address is

192.168.1.1

)°

When prompted, complete the

User name

and

Password

fields (the default user

name and password is

admin

)° Click the appropriate tab to change the settings

You cannot use the DSL service to connect manually to the Internet.

After you have installed the router, it will automatically connect to your Internet

Service Provider (ISP), so you no longer need to connect manually°

When you open the web browser, the login screen appears, even though you

do not need to log in.

These steps are specific to Internet Explorer but are similar for other browsers°

1.

Open the web browser°

2.

Go to

Tools

>

Internet Options

°

3.

Click the

Connections

tab°

4.

Select

Never dial a connection

°

5.

Click

OK

°

Troubleshooting

Page 175 / 678

20

Troubleshooting

Linksys X1000

The router does not have a coaxial port for the cable connection.

A coaxial cable can connect to only a cable modem° Your modem router works

as a modem with your ADSL Internet, but if you have cable Internet, your

modem router should be connected to a separate cable modem° Insert the

Setup CD into your computer and follow the on-screen instructions to connect

your modem-router to a cable modem°

You want to access the browser-based utility from Cisco Connect.

To enter the browser-based utility from Cisco Connect, follow these steps:

1.

Open Cisco Connect°

2.

On the main menu, click

Router settings

°

3.

Click

Advanced settings

°

4.

Write down the username and password that are displayed° (To help

protect your password, you can copy it to the Clipboard by clicking

Copy

password

°)

5.

Click

OK.

When you try to log into the browser-based utility, your password does not

work.

Your wireless security password also serves as the browser-based utility’s login

password° To see this password:

1.

Open Cisco Connect°

2.

On the main menu, click

Router settings

°

3.

The

Password

is displayed on the left side of the screen°

In Windows XP, you do not see the router in the

My Network Places

screen.

In the

Network Tasks

section, click

Show icons for networked UPnP devices

° If

the router does not appear, follow these instructions:

1.

Go to

Start > Control Panel > Firewall

°

2.

Click the

Exceptions

tab°

3.

Select

UPnP Framework

°

4.

Click

OK

°

WEB

If your questions are not addressed here, refer to the website,

linksys.com/support

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share