19216811.liveChapter 3
Advanced Configuration with the Web-based Utility
20
Wireless-N Internet Home Monitoring Camera
Set Sensitivity Area
Set Sensitivity Area
If you want to specify the sensitivity
area settings for motion detection, click this button to
display the
Set Sensitivity Area
window. The
Set Sensitivity
Area
window lets you specify the area of the video screen
that is used to detect motion. This is either the full screen,
or up to three user-defined custom areas within the full
screen.
Set Sensitivity Area
NOTE:
In order to set the Camera’s sensitivity
area, you will need to access the Web-based
utility using Internet Explorer 6 or higher.
The following fields appear on the left side of the
Set
Sensitivity Area
window for each sensitivity area. Specify
the settings as needed, then click
Apply
.
•
Full Screen or Window 2-4
This is the name of the
sensitivity area, either
Full screen
by default, or if
Setting Custom Area
is selected,
Window 2
,
Window 3
,
or
Window 4
(custom areas). To change a custom
area name to a more appropriate name, such as
Front
Door
, enter the new name in this field.
•
Setting Custom Area
To specify custom area(s) within
the full screen, check this box, then configure up to
three custom sensitivity areas. By default only one
area,
Window 2
, is selected. To create an additional
area, check the box next to its name. You can move
or resize each area as needed. Custom areas may also
overlap.
•
Threshold
Slide this to the left to reduce the area’s
sensitivity, or to the right to increase sensitivity.
New Motion Trigger Schedule
This section allows you to create a schedule that
determines when motion detection will be active. To do
this, you define one or more “trigger” events, or periods
during which motion detection will be in effect. For each
trigger event, fill in the following fields.
Trigger Motion Detection
Specify how often this trigger
event occurs:
Every day
,
Weekdays (Mon - Fri)
, or on
specific days of the week (
Sunday
to
Saturday
).
Start Time and End Time
Specify the start and end times
for the event.
Add
Click
Add
to add the new event to the schedule.
Clear
Click
Clear
to clear the schedule of all events.
Delete
To delete an event from the
Schedule List
, select
the event, then click
Delete
.
Schedule List
This displays all of the scheduled trigger
events that you have defined and saved. It is empty by
default.
To save your changes, click
Apply
. To cancel any unsaved
changes, click
Cancel
. To get additional information about
the screen’s features, click
Help
.
Setup > Recording
The
Setup > Recording
screen allows you to record video
to Samba compatible devices such as your Mac or PC’s
shared folder, or to a NAS (network-attached storage) on
your network.
Setup > Recording
Enable
Check this box to enable the Camera’s recording
features.