1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WVC54G

Linksys WVC54G Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys WVC54G router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 2
A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WVC54G
Internet Video Camera
Wireless-
G
1
2
A
Attach the antenna.
B
Connect the included Ethernet
network cable to your router,
switch, or computer.
C
Connect the other end of the
cable to the Ethernet port on
the Camera.
D
Connect the included power
adapter to the Power port on
the Camera.
E
Plug the power adapter into
an electrical outlet.
The Ready LED flashes while
the Camera is initializing. When
the Camera is ready for setup,
the Ready and Ethernet LEDs
are solidly lit.
F
Enter a unique name for the
Camera in the
Camera Name
field, and complete the
Description
field. Select your
time zone, and enter the date
and time. Then click
Next
.
G
If your network has a router or
other DHCP server, select
Automatic Configuration-
DHCP
. If the Camera requires a
static IP address, keep the
default setting,
Static IP
address
.
Click
Next
.
H
If you selected Automatic
Configuration-DHCP in step G,
then proceed to step I.
If you selected Static IP
address, the
IP Settings
screen
wi l appear. Enter an IP
Address, Subnet Mask, and
Default Gateway appropriate
for your network. You must
specify an IP Address and
Subnet Mask. If you are unsure
about the Default Gateway,
then leave this field blank.
Complete the
Primary DNS
and/or
Secondary DNS
fields.
Enter at least one DNS address,
which you can obtain from
your ISP. Click
Next
.
A
H
C
G
A
Insert the Setup CD-ROM into
your CD-ROM drive. The Setup
Wizard should run
automatica ly, and the
Welcome
screen should
appear. If it does not, click
Start
and then
Run
. In the field
provided, enter
D:\wvc54g.exe
(if “D” is the letter of your CD-
ROM drive).
B
Click
Setup
to begin the setup
process.
C
Make sure the Camera is
properly connected to your
network. Click
Next
.
D
The screen wi l display a list of
Wireless-G Internet Video
Cameras on your network and
status information. In the
Selection
box, click the name
of the Camera you are
currently insta ling. Click
Next
.
E
A
verify password
screen wi l
appear. In lowercase letters,
enter
admin
in the
Administrator Name
and
Password
fields. Click
OK
.
NOTE:
The default IP address of the
Camera is 192.168.1.115.
NOTE:
If you want to connect the
Camera to a wireless network for
setup, refer to the User Guide on the
Setup CD-ROM for instructions.
IMPORTANT:
You MUST connect the
Camera to a router, switch, or PC using
an Ethernet network cable BEFORE
powering on the Camera. Otherwise, the
Camera wi l not function.
D
C
D
E
GHz
2.4
802.11g
Connect the Camera to a Wired
Network for Setup
Set up the Video Camera
Package Contents
• Wireless-G Internet Video Camera
• Camera Desktop Stand
• Detachable Antenna
• Power Adapter
• Ethernet Network Cable
• Setup CD-ROM with User Guide
• User Guide on CD
• Quick Insta lation Guides
• SoloLink DDNS Free Trial Card
• Registration Card
F
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 2
J
L
Review your settings before the
Setup Wizard starts to copy
your files. Click
Next
.
M
Click the
OK
button to confirm
that you want to save the new
settings.
N
After the files have been
successfu ly copied, the
Congratulations
screen wi l
appear.
Click the
Insta l Viewer &
Recorder Utility
button to insta l
the Camera’s Utility on your PC.
This Utility provides a
convenient way to view and
record the Camera’s video.
N
I
Click the
Infrastructure
radio
button if you want the Camera
to communicate using an
access point or wireless router.
Click the
Ad-Hoc
radio button
if you want the Camera to
communicate without using an
access point or wireless router.
Click
Next
.
J
Enter your wireless network’s
SSID or network name. If you
chose Ad-Hoc mode, select
the channel at which the
network broadcasts its wireless
signal. Then click
Next
.
K
The
Security Settings
screen wi l
appear. If your network has
WEP encryption enabled, then
select the level of WEP
encryption and enter a
Passphrase. If you do not have
a Passphrase and want to
manua ly enter a WEP key,
leave the
Passphrase
field
blank and complete the
Key 1
field.
If your network has WEP
encryption disabled, keep the
default,
Then click
Next
.
4
A
Unplug the power adapter
from the electrical outlet.
B
Unplug the Ethernet network
cable from the Camera as we l
as the PC, router, or switch.
C
Place the Camera in the
location you want.
D
Plug the power adapter into a
local electrical outlet.
The Ready LED flashes while
the Camera is initializing. When
the Ready and Wireless LEDs
are solidly lit, the Camera is
ready for use.
E
Aim and focus the Camera
accordingly.
Congratulations! The insta lation of
the Wireless-G Internet Video
Camera is complete.
To view the Camera’s video, open
your web browser, and enter the
Camera’s IP address. (Use Internet
Explorer version 5.5 or higher.
Netscape users should use the
Viewer & Recorder Utility.)
A
After you clicked the Insta l
Viewer & Recorder Utility
button, the
Welcome
screen
wi l appear. Click
Next
.
B
To insta l the Utility files in the
default folder, click
Next
. To
select a different folder, click
Browse
and fo low the on-
screen directions.
C
To add program icons to the
default folder, click
Next
. To
add program icons to an
existing folder, select one from
the Existing Folders listed, and
then click
Next
.
D
When the ActiveX plug-in has
been insta led, you wi l see the
screen shown in Figure D. Then
click
OK
.
E
When the setup is complete,
click
OK
.
F
To open the Utility, double-click
its shortcut on your desktop.
WVC54G-QI-404
20A
JL
M
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also ca l or e-mail for further
support.
24-hour Technical Support
800-326-7114
(to l-free from US or Canada)
E-mail Support
Website
h tp://www.linksys.com or
h tp://support.linksys.com
RMA (Return Merchandise Authorization)
h tp://www.linksys.com/support
FTP Site
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark
and SoloLink is a trademark of Cisco Systems,
Inc. and/or its a filiates in the U.S. and certain
other countries. Copyright © 2004 Cisco Systems,
Inc. A l rights reserved.
Model No.
3
K
L
NOTE:
On the
Congratulations
screen of
the Setup Wizard, you can click the
Setup SoloLink DDNS Service
button
to take advantage of the Camera’s
Dynamic Domain Name System (DDNS)
feature. This is useful for remote access
of the Camera via the Internet. Refer to
the SoloLink
™
Quick Insta lation for
more information.
F
Install the Viewer & Recorder Utility
Connect the Video Camera for
Wireless Network Use
I
A
B
D
C
E
NOTE:
To use the Viewer & Recorder
Utility, double-click its icon. Click
Find
to search for the Camera. Click
Add
to
add the Camera to the Utility’s list.
Then click
View
.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top