1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT54GXv2
    5. /
  5. 5
Page 21 / 75 Scroll up to view Page 16 - 20
15
Chapter 5: Configuring the Wireless-G Broadband Router
The Setup Tab - DDNS
Wireless-G Broadband Router with SRX
The Setup Tab - DDNS
The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and
domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server,
or other server behind the Router. Before you can use this feature, you need to sign up for DDNS service at
www.dyndns.org, a DDNS service providers.
DDNS Service
. From this pull-down menu, enter the DDNS service with which you have membership.
User Name
. Enter the User Name for your DDNS account
Password
. Enter the Password for your DDNS account.
Host Name
. The is the DDNS URL assigned by the DDNS service.
Internet IP Address
. This is the Router’s current IP Address as seen on the Internet.
Status
. This displays the status of the DDNS connection.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 5-12: Setup Tab - DDNS
ddns
: allows the hosting of a website, FTP server, or
e-mail server with a fixed domain name (e.g.,
www.xyz.com) and a dynamic IP address
Page 22 / 75
16
Chapter 5: Configuring the Wireless-G Broadband Router
The Setup Tab - MAC Address Clone
Wireless-G Broadband Router with SRX
The Setup Tab - MAC Address Clone
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will
require you to register a MAC address in order to access the Internet.
If you do not wish to re-register the MAC
address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router
with the MAC Address Clone feature.
Enable/Disable
. To have the MAC Address cloned, click the radio button beside
Enable
.
User Defined Entry
. Enter the MAC Address registered with your ISP here.
Clone Your PC’s MAC
. Clicking this button will clone the MAC address.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 5-13: Setup Tab - MAC Address Clone
Page 23 / 75
17
Chapter 5: Configuring the Wireless-G Broadband Router
The Setup Tab - Advanced Routing
Wireless-G Broadband Router with SRX
The Setup Tab - Advanced Routing
This tab is used to set up the Router’s advanced functions. NAT Mode allows you to select the type(s) of advanced
functions you use. Static Routing sets up a fixed route to another network destination.
NAT Mode
. Select the mode in which this Router will function. If this Router is hosting your network’s connection
to the Internet, select
Enable
. If another Router exists on your network, select
Disable
.
Dynamic Routing
. With Dynamic Routing you can enable the Router to automatically adjust to physical changes
in the network’s layout. The Router, using the RIP protocol, determines the network packets’ route based on the
fewest number of hops between the source and the destination. The RIP protocol regularly broadcasts routing
information to other routers on the network.
RIP
. To use dynamic routing, click the
Disabled
radio button.
Receive RIP Version
. To use dynamic routing for reception of network data, select the protocol you want:
Both RIP v1 and v2
,
RIPv1
, or
RIPv2
. If you do not want to use this feature, select
None
.
Transmit RIP Version
. To use dynamic routing for transmission of network data, select the protocol you
want:
Both RIP v1 and v2
,
RIPv1
, or
RIPv2
. If you do not want to use this feature, select
None
.
Static Routing
. To set up a static route between the Router and another network, select a number from the
Static
Routing
drop-down list. (A static route is a pre-determined pathway that network information must travel to reach
a specific host or network.) Enter the information described below to set up a new static route. (Click the
Delete
This Entry
button to delete a static route.)
Enter Route Name
. Enter a name for the Route here, using a maximum of 25 alphanumeric characters.
Destination LAN IP
. The Destination LAN IP is the address of the remote network or host to which you want to
assign a static route.
Subnet Mask
. The Subnet Mask determines which portion of a Destination LAN IP address is the network
portion, and which portion is the host portion.
Default Gateway
. This is the IP address of the gateway device that allows for contact between the Router and
the remote network or host.
Interface
. This interface tells you whether the Destination IP Address is on the
LAN & Wireless
(Ethernet and
wireless networks), the
WAN
(Internet), or
Loopback
(a dummy network in which one PC acts like a
network—necessary for certain software programs).
Click the
Show Routing Table
button to view the Static Routes you’ve already set up.
Figure 5-14: Setup Tab - Advanced Routing
default gateway
: a device that forwards
Internet traffic from your local area network
Figure 5-15: Setup Tab - Advanced Routing - NAT Mode
Page 24 / 75
18
Chapter 5: Configuring the Wireless-G Broadband Router
The Wireless Tab - Basic Wireless Settings
Wireless-G Broadband Router with SRX
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
The Wireless Tab - Basic Wireless Settings
The basic settings for wireless networking are set on this screen.
Wireless Network Mode
. From this drop-down menu, you can select the wireless standards running on your
network. If you have both 802.11g and 802.11b devices in your network, keep the default setting,
Mixed
. If you
have only 802.11g devices, select
G-Only
. If you have only 802.11b devices, select
B-Only
. If you do not have any
802.11g and 802.11b devices in your network, select
Disable
. SRX works automatically with all settings,
providing the added bonus of increased speed across your entire network and even greater speed when using
SRX products only.
Wireless Network Name (SSID)
. The SSID is the network name shared among all points in a wireless network.
The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32
characters (use any of the characters on the keyboard). Make sure this setting is the same for all points in your
wireless network. For added security, you should change the default SSID (
linksys
) to a unique name.
Wireless Channel
. Select the appropriate channel from the list provided to correspond with your network
settings. All devices in your wireless network must be broadcast on the same channel in order to function
correctly.
Wireless SSID Broadcast
. When wireless clients survey the local area for wireless networks to associate with,
they will detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting,
Enable
. If you do not want to broadcast the Router's SSID, then select
Disable
.
QoS Configuration
. Quality of Service (QoS) ensures better service to high-priority types of network traffic,
which may involve demanding, real-time applications, such as videoconferencing.
ACK Mode
. This setting prioritizes QoS for users who also have ACK Mode enabled. Users with
Immediate ACK
(the default setting) will experience reliable connectivity for normal network use.
Burst ACK
is faster but less
reliable and may also affect long-range wireless performance. The
No ACK
setting disables the ACK feature.
Clients utilizing ACK must have their wireless adapter on the same setting as the Router.
802.11e QoS
. This setting prioritized QoS for uses who have this setting enabled on their wireless adapter.
Change these settings as described here and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 5-16: Wireless Tab - Basic Wireless Settings
Page 25 / 75
19
Chapter 5: Configuring the Wireless-G Broadband Router
The Wireless Tab - Wireless Security
Wireless-G Broadband Router with SRX
The Wireless Tab - Wireless Security
The Wireless Security settings configure the security of your wireless network. There are four wireless security
mode options supported by the Router: WPA Pre-Shared Key, WPA RADIUS, and WEP. (WPA stands for Wi-Fi
Protected Access, which is a security standard stronger than WEP encryption. WEP stands for Wired Equivalent
Privacy, while RADIUS stands for Remote Authentication Dial-In User Service.) These three are briefly discussed
here. For detailed instructions on configuring wireless security for the Router, turn to “Appendix B: Wireless
Security.”
WPA Pre-Shared Key
. WPA gives you two encryption methods, TKIP and AES, with dynamic encryption keys.
Select the type of algorithm,
TKIP
or
AES
. Enter a WPA Shared Key of 8-63 characters. Then enter a Group Key
Renewal period, which instructs the Router how often it should change the encryption keys.
WPA RADIUS
. This option features WPA used in coordination with a RADIUS server. (This should only be used
when a RADIUS server is connected to the Router.) First, select the type of WPA algorithm you want to use,
TKIP
or
AES
. Enter the RADIUS server’s IP Address and port number, along with a key shared between the Router and
the server. Last, enter a Key Renewal Timeout, which instructs the Router how often it should change the
encryption keys.
Figure 5-17: Wireless Tab - Wireless Security (WPA
Pre-Shared Key)
Figure 5-18: Wireless Tab - Wireless Security
(WPA RADIUS)
IMPORTANT:
If you are using WPA, always
remember that each device in your wireless
network MUST use the same WPA method
and shared key, or else the network will not
function properly.

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top