Linksys WRT54GXv2 Router Manual PDF (Setup & Configuration Guide)

Page 61 / 75 Scroll up to view Page 56 - 60

55

Appendix D: Windows Help

Wireless-G Broadband Router with SRX

Appendix D: Windows Help

All Linksys wireless products require Microsoft Windows. Windows is the most used operating system in the

world and comes with many features that help make networking easier. These features can be accessed through

Windows Help and are described in this appendix.

TCP/IP

Before a computer can communicate with the Broadband Router, TCP/IP must be enabled. TCP/IP is a set of

instructions, or protocol, all PCs follow to communicate over a network. This is true for wireless networks as well.

Your PCs will not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides

complete instructions on enabling TCP/IP.

Shared Resources

If you wish to share printers, folder, or files over your network, Windows Help provides complete instructions on

utilizing shared resources.

Network Neighborhood/My Network Places

Other PCs on your network will appear under Network Neighborhood or My Network Places (depending upon the

version of Windows you're running). Windows Help provides complete instructions on adding PCs to your

network.

Page 62 / 75

56

Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter

Windows 98SE or Me Instructions

Wireless-G Broadband Router with SRX

Appendix E: Finding the MAC Address and IP Address for Your

Ethernet Adapter

This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC

filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s

Ethernet adapter. This IP address is used for the Router’s filtering, forwarding, and/or DMZ features. Follow the

steps in this appendix to find the adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.

Windows 98SE or Me Instructions

1.

Click

Start

and

Run

. In the

Open

field, enter

winipcfg

. Then press the

Enter

key or the

OK

button.

2.

When the

IP Configuration

screen appears, select the Ethernet adapter you have connected to the Router via a

CAT 5 Ethernet network cable.

3.

Write down the Adapter Address as shown on your computer screen. This is the MAC address for your

Ethernet adapter and is shown as a series of numbers and letters.

The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.

Another screen will show the Ethernet adapter’s IP address. (Shown in the example as 192.168.1.100.) Your

computer may show something different.

Figure E-2: MAC Address/Adapter Address

Figure E-1: IP Configuration Screen

Note:

The MAC address is also called the Adapter Address.

Figure E-3: MAC Address/Physical Address

Page 63 / 75

57

Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter

Windows 2000 or XP Instructions

Wireless-G Broadband Router with SRX

Windows 2000 or XP Instructions

1.

Click

Start

and

Run

. In the

Open

field, enter

cmd

. Press the

Enter

key or click the

OK

button.

2.

At the command prompt, enter

ipconfig /all

. Then press the

Enter

key.

3.

Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet

adapter. This appears as a series of numbers and letters.

The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.

Another screen will show the Ethernet adapter’s IP address. (Shown in the example as 192.168.1.100.) Your

computer may show something different.

For the Router’s Web-based Utility

For MAC filtering, enter the 12-digit MAC address in this format, XXXXXXXXXXXX, WITHOUT the hyphens.

For MAC address cloning, enter the 12-digit MAC address in the

MAC Address

fields provided, two digits per field.

Figure E-4: MAC Address Filter List

Note:

The MAC address is also called the Physical Address.

Figure E-5: MAC Address Clone

Page 64 / 75

58

Appendix F: Glossary

Wireless-G Broadband Router with SRX

Appendix F: Glossary

802.11b

- An IEEE wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an

operating frequency of 2.4GHz.

802.11g

- An IEEE wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an

operating frequency of 2.4GHz, and backward compatibility with 802.11b devices.

Access Point

- A device that allows wireless-equipped computers and other devices to communicate with a

wired network. Also used to expand the range of a wireless network.

Adapter

- A device that adds network functionality to your PC.

Ad-hoc

- A group of wireless devices communicating directly with each other (peer-to-peer) without the use of

an access point.

AES

(

A

dvanced

E

ncryption

S

tandard) - A method that uses up to 256-bit key encryption to secure data.

Backbone

- The part of a network that connects most of the systems and networks together, and handles the

most data.

Bandwidth

- The transmission capacity of a given device or network.

Beacon Interval

- Data transmitted on your wireless network that keeps the network synchronized.

Bit

- A binary digit.

Boot

- To start a device and cause it to start executing instructions.

Broadband

- An always-on, fast Internet connection.

Browser

- An application program that provides a way to look at and interact with all the information on the

World Wide Web.

Cable Modem

- A device that connects a computer to the cable television network, which in turn connects to the

Internet.

CSMA/CA

(

C

arrier

S

ense

M

ultiple

A

ccess/

C

ollision

A

voidance) - A method of data transfer that is used to prevent

data collisions.

Page 65 / 75

59

Appendix F: Glossary

Wireless-G Broadband Router with SRX

CTS

(

C

lear

T

o

S

end) - A signal sent by a wireless device, signifying that it is ready to receive data.

Database

- A collection of data that is organized so that its contents can easily be accessed, managed, and

updated.

DDNS

(

D

ynamic

D

omain

N

ame

S

ystem) - Allows the hosting of a website, FTP server, or e-mail server with a

fixed domain name (e.g., www.xyz.com) and a dynamic IP address.

Default Gateway

- A device that forwards Internet traffic from your local area network.

DHCP

(

D

ynamic

H

ost

C

onfiguration

P

rotocol) - A networking protocol that allows administrators to assign

temporary IP addresses to network computers by "leasing" an IP address to a user for a limited amount of time,

instead of assigning permanent IP addresses.

DMZ

(

D

e

m

ilitarized

Z

one) - Removes the Router's firewall protection from one PC, allowing it to be "seen" from

the Internet.

DNS

(

D

omain

N

ame

S

erver) - The IP address of your ISP's server, which translates the names of websites into IP

addresses.

Domain

- A specific name for a network of computers.

Download

- To receive a file transmitted over a network.

DSL

(

D

igital

S

ubscriber

L

ine) - An always-on broadband connection over traditional phone lines.

DSSS

(

D

irect-

S

equence

S

pread-

S

pectrum) - Frequency transmission with a redundant bit pattern resulting in a

lower probability of information being lost in transit.

DTIM

(

D

elivery

T

raffic

I

ndication

M

essage) - A message included in data packets that can increase wireless

efficiency.

Dynamic IP Address

- A temporary IP address assigned by a DHCP server.

Encryption

- Encoding data transmitted in a network.

ESS

(

E

xtended

S

ervice

S

et) - More than one BSS in a network.

Ethernet

- IEEE standard network protocol that specifies how data is placed on and retrieved from a common

transmission medium.

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share