45

Chapter 5: Configuring the Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Management

Wireless-G Broadband Router with 2 Phone Ports

Allow users to disable Internet access

. When enabled, this feature allows you to prohibit any and all Internet

connections.

Backup and Restore

Backup and Restore

. Click this button to back up or restore your configuration. Click the

Backup

button to back

up the configuration. To restore your configuration, click the

Browse

button to find the file, and then click the

Restore

button.

When you have finished making changes on this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. Help information is shown on the right-hand side of a

screen. For additional information, click

More

.

Figure 5-1: Backup & Restore Configuration

46

Chapter 5: Configuring the Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Log

Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Log

When you click the Administration tab, you will see the

Log

screen. It provides you with a log of all incoming and

outgoing URLs or IP addresses for your Internet connection.

Log

Log

. To access activity logs, select the

Yes

radio button. With logging enabled, you can choose to view temporary

logs or keep a permanent record using the Logviewer software. Click the

No

button to disable this function.

Logviewer IP Address

. For a permanent record of these logs, Logviewer software must be used. This software

is downloadable from the Linksys website,

www.linksys.com

. The Logviewer saves all incoming and outgoing

activity in a permanent file on your PC’s hard drive. In the

Logviewer IP Address

field, enter the fixed IP address of

the PC running the Logviewer software. The Router will now send updated logs to that PC.

Incoming Log

. Click the

Incoming Log

button to view a temporary log of the Source IP addresses and

Destination Port Numbers for all the incoming Internet traffic. Click the

Refresh

button to update the log.

Outgoing Log

. Click the

Outgoing Log

button to view a temporary log of all the URLs and IP addresses of Internet

sites that users on your network have accessed. The LAN IP address, Destination URL/IP, and Service/Port

Number for each site are listed. Click the

Refresh

button to update the log.

When you have finished making changes on this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. Help information is shown on the right-hand side of a

screen. For additional information, click

More

.

Figure 5-33: Administration Tab - Log

Figure 5-34: Incoming Log Table

Figure 5-35: Outgoing Log Table

47

Chapter 5: Configuring the Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Factory Defaults

Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Factory Defaults

babyTEL normally does not allow the user to reset the router to its factory default settings.

If there's a need, contact babyTEL for the required password and other details.

Figure 5-36: Administration Tab - Factory Defaults

48

Chapter 5: Configuring the Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Firmware Upgrade

Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Firmware Upgrade

babyTEL does not allow the user to upgrade the router's firmware. babyTEL upgrades the firmware

remotely and automatically, when needed. Contact babyTEL for more information.

Figure 5-37: Administration Tab - Firmware Upgrade

download

: to receive a file transmitted over a network

firmware

: the programming code

that runs a networking device

upgrade

: to replace existing software or

firmware with a newer version

49

Chapter 5: Configuring the Wireless-G Broadband Router with 2 Phone Ports

The Status Tab - Voice

Wireless-G Broadband Router with 2 Phone Ports

The Status Tab - Voice

When you click the Status tab, you will see the

Voice

screen, which displays information about your Internet

phone line(s).

Information

Voice Version

. This shows the version number of the voice firmware currently installed on the Router.

Line1 Status

Registration Status

. This indicates whether or not this phone line is registered with babyTEL.

If the phone line is not registered, then you should register it with babyTEL.

If the registration status indicates that the registration has failed, then refer to “Appendix A: Troubleshooting.”

Call1 Status

. The status of the active phone call is shown here.

Call2 Status

. If you are using call waiting, the status of the incoming phone call is shown here.

Line2 Status

Registration Status

. This indicates whether or not this phone line is registered with babyTEL.

If the phone line is not registered, then you should register it with babyTEL.

If the registration status indicates that the registration has failed, then refer to “Appendix A: Troubleshooting.”

Call1 Status

. The status of the active phone call is shown here.

Call2 Status

. If you are using call waiting, the status of the incoming phone call is shown here.

For help information, click

More

.

Figure 5-38: Status Tab - Voice