19216811.liveAppendix±A
Troubleshooting
3³
W±reless-G Router for 3G/UMTS Broadband
Append±x A:
Troubleshoot±ng
Your computer cannot connect to the Internet.
Check that everything is connected properly. The PC must
be connected to one of the ports numbered 1-4 on the
Router, and the modem must be connected to the Internet
port on the Router.
Power down everything, then power on each device in
the following order, waiting for each device to completely
startup before turning on the next:
DSL or cable modem
Router
PC
Check the LEDs on the front panel of the Router. Make
sure the Power, DSL, and at least one of the numbered
LEDs are lit. If they are not, then check the cable
connections. The computer should be connected to
one of the ports numbered 1-4 on the Router, and
the Line port of the Router must be connected to the
ADSL line.
When you double-click the web browser, you are
prompted for a username and password. If you want to
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar
for other browsers):
Select
Tools
>
Internet Opt±ons
.
Click the
Connect±ons
tab.
Select
Never d±al a connect±on
.
Click
OK
.
You are using a static IP address and cannot connect.
Refer to Windows Help and
change your Internet Protocol
(TCP/IP) Properties to Obtain an IP address automatically.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same
on both the computer and the Router. If you have enabled
wireless security, then make sure the same security
method and key are used by both the computer and the
Router.
1.
•
1.
2.
3.
4.
You need to modify the basic settings on the Router.
Run the Setup Wizard on the Setup CD-ROM.
You need to modify the advanced settings on the
Router.
Open the web browser (for example, Internet Explorer or
Firefox), and enter the Router’s IP address in the address
field (the default IP address is
192.1´¶.1.1
). When
prompted, complete the
Username
and
Password
fields
(the default username and password is
adm±n
). Click the
appropriate tab to change the settings.
How do you connect to the mobile network?
There are three options available.
First Option Using the Front Panel Button
Power on the Router with the mobile broadband data
card or USB adapter installed.
Press the
Mob±le Connect/D±sconnect
button on the
front panel of the Router.
The Router will connect to the mobile network via the
mobile broadband data card or USB adapter. If this is
successful, the Internet Mobile LED on the Router will
light up.
Second Option Using the Web-Based Utility
Open the web browser.
Enter the Router’s IP address in the
Address
field (the
default IP address is
192.1´¶.1.1
). Press
Enter
.
When
prompted,
complete
the
Username
and
Password
fields (the default username and password
is
adm±n
). Click
OK
.
On the first screen you see, the
Basic Setup
screen,
click the
Connect
button near the top of the screen.
The Router will connect to the mobile network via
the mobile broadband data card or USB adapter. If
this is successful, the Mobile Connection line will say,
“Connected” instead of “Disconnected.”
Third Option Using the Auto Connect Feature
The Router’s Auto Connect feature enables the Router to
automatically connect to the mobile network whenever it
is powered on.
Open the web browser.
Enter the Router’s IP address in the
Address
field (the
default IP address is
192.1´¶.1.1
). Press
Enter
.
When
prompted,
complete
the
Username
and
Password
fields (the default username and password
is
adm±n
). Click
OK
.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.