1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT54G3G
    5. /
  5. 30
Page 146 / 165 Scroll up to view Page 141 - 145
136
Appendix I: Regulatory Information
Wireless-G Router for 3G/UMTS Broadband
Latvia
The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check
http://www.esd.lv for more details.
Notes: (1) Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also
been implemented in those countries.
(2) The regulatory limits for maximum output power are specified in eirp. The eirp level of a device can be calculated by
adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm).
Product Usage Restrictions
This product is designed for indoor usage only. Outdoor usage is not recommended, unless otherwise noted.
2,4 GHz Restrictions
This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together
with the equipment. However, some applications may require the antenna(s), if removable, to be separated from the
product and installed remotely from the device by using extension cables. For these applications, Linksys offers an R-SMA
extension cable (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a
cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S
(with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used
with either the R-SMA or R-TNC extension cable.
Combinations of extension cables and antennas resulting in a radiated power level exceeding 100 mW EIRP are illegal.
Power Output of Your Device
To comply with your country’s regulations, you may have to change the power output of your wireless device. Proceed to
the appropriate section for your device.
NOTE:
The power output setting may not be available on all wireless products. For more information, refer to the
documentation on your product’s CD or at http://www.linksys.com/international.
Downloaded from
www.Manualslib.com
manuals search engine
Page 147 / 165
137
Appendix I: Regulatory Information
Wireless-G Router for 3G/UMTS Broadband
Wireless Adapters
For wireless adapters operating in the 2,4-GHz band, the typical radiated output power is 18 dBm EIRP, while the maximum
radiated output power will not exceed 20 dBm
(100 mW) EIRP. For wireless adapters operating in the 5-GHz band, the typical radiated output power is 20 dBm EIRP, while
the maximum radiated output power will not exceed 23 dBm (200 mW) EIRP. If you need to alter your wireless adapter’s
power output, follow the appropriate instructions for your computer’s operating system:
Windows XP
1.
Double-click the
Wireless
icon in your desktop’s system tray.
2.
Open the
Wireless Network Connection
window.
3.
Click the
Properties
button.
4.
Select the
General
tab, and click the
Configure
button.
5.
In the
Properties
window, click the
Advanced
tab.
6.
Select
Power Output
.
7.
From the pull-down menu on the right, select the adapter’s power output percentage.
Windows 2000
1.
Open the
Control Panel
.
2.
Double-click
Network and Dial-Up Connections
.
3.
Select your current wireless connection, and select
Properties
.
4.
From the Properties screen, click the
Configure
button.
5.
Click the
Advanced
tab, and select
Power Output
.
6.
From the pull-down menu on the right, select the adapter’s power setting.
If your computer is running Windows Millennium or 98, then refer to Windows Help for instructions on how to access the
advanced settings of a network adapter.
Downloaded from
www.Manualslib.com
manuals search engine
Page 148 / 165
138
Appendix I: Regulatory Information
Wireless-G Router for 3G/UMTS Broadband
Wireless Access Points, Routers, or Other Wireless Products
If you have a different wireless product, use its web-based utility to configure its power output setting (refer to the
product’s documentation for more information).
Technical Documents on www.linksys.com/international
Follow these steps to access technical documents:
1.
Enter http://www.linksys.com/international in your web browser.
2.
Select the country or region in which you live.
3.
Click the
Products
tab.
4.
Select the appropriate product category.
5.
Select the product sub-category, if necessary.
6.
Select the product.
7.
Select the type of documentation you want from the More Information section. The document will open in PDF format if
you have Adobe Acrobat installed on your computer.
NOTE:
If you have questions regarding the compliance of this product or you cannot find the information you need,
please contact your local sales office or visit http://www.linksys.com/international for more details.
Downloaded from
www.Manualslib.com
manuals search engine
Page 149 / 165
139
Appendix I: Regulatory Information
Wireless-G Router for 3G/UMTS Broadband
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic
Equipment (WEEE)
This document contains important information for users with regards to the proper disposal and recycling of Linksys
products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:
Downloaded from
www.Manualslib.com
manuals search engine
Page 150 / 165
140
Appendix I: Regulatory Information
Wireless-G Router for 3G/UMTS Broadband
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top