1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT350Nv2
    5. /
  5. 5
Page 21 / 38 Scroll up to view Page 16 - 20
Chapter 3
Advanced Configuration
18
Wireless-N Gigabit Router with Storage Link
Delete
Click the
Delete
button to delete a specific
partition from the Router’s database.
After you have made your changes, click the
Save Settings
button to apply your changes, or click the
Cancel Changes
button to cancel your changes.
Storage > FTP Server
An external USB hard drive or USB disk must be connected
to the USB Port of the Router to use the storage feature.
The FTP Server tab creates an FTP Server that can be
accessed from the Internet or your local network.
Storage> FTP Server
Setup
Server Name
The name of the router’s FTP server
is displayed here. It can be changed at Storage >
Administration.
FTP Server
Select
Enable
to set this Router as an FTP
Server. Otherwise, select
Disable
to turn the service off.
An external USB hard drive or USB disk must be connected
to the USB Port to use this service.
Internet Access
Select
Enable
to allow access of the FTP
Server from the Internet. Otherwise, select
Disable
to only
allow local network access.
FTP Port
Enter the FTP Port number to use. The default
port is 21.
Share
Select the partition or folder to share in the FTP Server.
All Partitions
Selects all partitions on the USB disk.
Specify Folder
If you want to share a specific folder, click
Select Partition
and locate the folder.
Access
Click
FTP Share Access
to grant specific rights to groups.
You can grant Read Only or Read/Write permissions.
FTP Access
Select the group from the Other Group list
and click either the
Read Only
or
Read/Write
button to
move the group to the Group With Access column.
After you have made your changes, click the
Save Settings
button to apply your changes, or click the
Cancel Changes
button to cancel your changes. Click
Close
to exit this
window.
Access Restrictions > Internet Access
The
Access Restrictions > Internet Access
screen allows you
to deny or allow specific kinds of Internet usage and traffic,
such as Internet access, designated services, and websites
during specific days and times.
Access Restrictions > Internet Access
Internet Access
Internet Access Policy
Internet Access can be managed
by a policy. Use the settings on this screen to establish an
access policy (after
Save Settings
is clicked). Selecting a
policy from the drop-down menu will display that policy’s
settings. To delete a policy, select that policy’s number
and click
Delete
. To view all the policies, click
Summary
.
Deny or Allow
If you select
Deny
, the PC on the Edit
List will be denied Internet Access by the dates and times
selected. PCs not on the list will still have Internet access. If
you select Allow, the PCs on the Edit List will have Internet
access by the dates and times selected. The PCs not on the
Edit List will not have Internet access.
If there is a conflict
with a policy, the lower numbered policy will have priority
over a higher numbered policy.
Page 22 / 38
Chapter 3
Advanced Configuration
19
Wireless-N Gigabit Router with Storage Link
To create an Internet Access Policy:
Select a number from the
1.
Internet Access Policy
drop-
down menu.
Enter a Policy Name in the field.
2.
To enable this policy, select
3.
Enable
.
Click
the
4.
Edit List
button to select which PCs will be
affected by the policy. The
List of PCs
screen appears. You
can select a PC by MAC Address or IP Address. You can
also enter a range of IP Addresses if you want this policy
to affect a group of PCs. After making your changes,
click
Save Settings
to apply your changes or
Cancel
Changes
to cancel your changes. Then click
Close
.
List of PCs
Select
the
appropriate
option,
5.
Deny
or
Allow
,
depending on whether you want to block or allow
Internet access for the PCs you listed on the
List of PCs
screen.
Decide which days and what times you want this policy
6.
to be enforced. Select the individual days during which
the policy will be in effect, or select
Everyday
. Then
enter a range of hours and minutes during which the
policy will be in effect, or select
24 Hours
.
Enter
a URL address or Keyword for Website Blocking
7.
or select any Blocked Applications you wish to use.
Using these features can slow down your Internet
speed.
Click
8.
Save Settings
to save the policy’s settings, or
click
Cancel Changes
to cancel the policy’s settings.
Blocked Applications
You can filter access to various services accessed over the
Internet, such as FTP or telnet, by selecting applications
from the Applications List.
To add an application, enter the application’s name in the
Application Name
field. Enter its range in the
Port Range
fields. Select its protocol from the
Protocol
drop-down
menu. Then click
Add
.
To modify an application, select it from the
Application
List
. Change the application name, port range, or protocol
setting. Then click
Modify
.
To delete an application, select it from the
Application List
.
Then click
Delete
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Applications and Gaming > Single Port
Forwarding
The
Single Port Forwarding
screen allows you to customize
port services for common applications.
When users send these types of requests to your network via
the Internet, the Gateway will forward those requests to the
appropriate servers (computers). Before using forwarding,
you should assign static IP addresses to the designated
servers.
Applications and Gaming > Single Port Forwarding
Single Port Forwarding
To forward a port, enter the information on each line for
the criteria required.
Application
Select
pre-configure
or enter the name you
wish to give the application. Each name can be up to 12
characters.
External and Internal Port
Enter the external and
internal port numbers.
Protocol
Select the protocol
TCP
or
UDP
, or select
Both
.
,
.
IP Address
For each application, enter the IP address of
the computer that should receive the requests.
Enabled
For each application, select
Enabled
to enable
port forwarding.
Page 23 / 38
Chapter 3
Advanced Configuration
20
Wireless-N Gigabit Router with Storage Link
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
For more information,
click
Help
.
Applications and Gaming > Port Range
Forwarding
The
Applications & Gaming > Port Range Forwarding
screen
allows you to set up public services on your network, such as
web servers, ftp servers, e-mail servers, or other specialized
Internet applications. (Specialized Internet applications are
any applications that use Internet access to perform functions
such as videoconferencing or online gaming. Some Internet
applications may not require any forwarding.)
Applications and Gaming > Port Range Forwarding
Port Range Forwarding
To forward a port, enter the information on each line for
the criteria required.
Application
In this field, enter the name you wish to give
the application. Each name can be up to 12 characters.
Start/End
This is the port range. Enter the number that
starts the port range in the Start column and the number
that ends the range in the End column.
Protocol
Select the protocol used for this application,
either
TCP
or
UDP
, or
Both
.
IP Address
For each application, enter the IP Address of
the PC running the specific application.
Enable
Select
Enable
to enable port forwarding for the
relevant application.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
For more information,
click
Help
.
Applications & Gaming > Port Range
Triggering
The
Applications & Gaming > Port Range Triggering
screen
allows the Router to watch outgoing data for specific port
numbers. The IP address of the computer that sends the
matching data is remembered by the Router, so that when
the requested data returns through the Router, the data is
pulled back to the proper computer by way of IP address
and port mapping rules.
Applications and Gaming > Port Triggering
Port Range Triggering
Application Name
Enter the application name of the
trigger.
Triggered Range
For each application, list the triggered
port number range. Check with the Internet application
documentation for the port number(s) needed.
Start Port
•
Enter the starting port number of the
Triggered Range.
End Port
•
Enter the ending port number of the
Triggered Range.
Forwarded Range
For each application, list the forwarded
port number range. Check with the Internet application
documentation for the port number(s) needed.
Start Port
•
Enter the starting port number of the
Forwarded Range.
End Port
•
Enter the ending port number of the
Forwarded Range.
Enable
Select
Enable
to enable port triggering for the
applicable application.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
For more information,
click
Help
.
Page 24 / 38
Chapter 3
Advanced Configuration
21
Wireless-N Gigabit Router with Storage Link
Applications and Gaming > DMZ
The DMZ feature allows one network computer to be
exposed to the Internet for use of a special-purpose
service such as Internet gaming or videoconferencing.
DMZ hosting forwards all the ports at the same time to
one PC. The Port Range Forward feature is more secure
because it only opens the ports you want to have opened,
while DMZ hosting opens all the ports of one computer,
exposing the computer to the Internet.
Applications and Gaming > DMZ
DMZ
To use this feature, select
Enabled
. To disable DMZ hosting,
select
Disabled
.
Source IP Address
If you want any IP address to be the
source, select
Any IP Address
. If you want to specify an IP
address or range of IP addresses as the designated source,
click the second radio button, and enter the IP address(es)
in the fields provided.
Destination
If you want to specify the DMZ host by IP
address, select
IP Address
and complete the IP address
in the field provided. If you want to specify the DMZ host
by MAC address, select
MAC Address
and enter the MAC
address in the field provided. To retrieve this information,
click the
DHCP Client Table
button.
The DHCP Client Table lists computers and other devices
that have been assigned IP addresses by the Router. The list
can be sorted by Client Name, Interface, IP Address, MAC
Address, and Expired Time (how much time is left for the
current IP address). To select a DHCP client, click the
Select
button. To retrieve the most up-to-date information, click
the
Refresh
button. To exit this screen and return to the
DMZ screen, click the
Close
button.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
For more information,
click
Help
.
Applications and Gaming > QoS
Quality of Service (QoS) ensures better service to
high-priority
types
of
network
traffic,
which
may
involve
demanding,
real-time
applications,
such
as
videoconferencing.
Applications and Gaming > QoS
QoS (Quality of Service)
Wireless
Wireless WMM (Wi-Fi Multimedia)
WMM is a wireless
Quality of Service feature that improves quality for audio,
video, and voice applications by prioritizing wireless
traffic. To use this feature, your wireless client devices in
your network must support Wireless WMM. If you would
like to disable this feature, select
Disabled
. Otherwise,
keep the default,
Enabled
.
No Acknowledgement
If you want to disable the Router’s
Acknowledgement feature, so the Router will not re-send
data if an error occurs, then keep the default, Enabled.
Otherwise, select
Disabled
.
Internet Access Priority
In this section, you can set the bandwidth priority for a
variety of applications and devices. There are four levels
priority: High, Medium, Normal, or Low. When you set
priority, do not set all applications to High, because this will
defeat the purpose of allocating the available bandwidth.
If you want to select below normal bandwidth, select Low.
Depending on the application, a few attempts may be
needed to set the appropriate bandwidth priority.
Enabled/Disabled. To use the QoS policies you set, select
Enabled
. Otherwise, select
Disabled
.
Category
There are five categories available. Select one of the
following:
Applications
,
Online Games
,
MAC Address
,
Ethernet Port
, or
Voice Device
. Proceed to the instructions
for your selection.
Page 25 / 38
Chapter 3
Advanced Configuration
22
Wireless-N Gigabit Router with Storage Link
Applications
Applications
Select the appropriate application. If you
select
Add a New Application
, follow the Add a New
Application instructions.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
Add a New Application
Enter a Name
Enter any name to indicate the name of
the entry.
Port Range
Enter the port range that the application will
be using. For example, if you want to allocate bandwidth
for FTP, you can enter 21-21. If you need services for an
application that uses from 1000 to 1250, you enter 1000-
1250 as your settings. You can have up to three ranges
to define for this bandwidth allocation. Port numbers
can range from 1 to 65535. Check your application’s
documentation for details on the service ports used.
Select the protocol
TCP
or
UDP,
or select
Both
.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
Online Games
Games
Select the appropriate game. If you select
Add a
New Game
, follow the Add a New Game instructions.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
Enter a Name
Enter any name to indicate the name of
the entry.
Port Range
Enter the port range that the application will
be using. For example, if you want to allocate bandwidth
for FTP, you can enter 21-21. If you need services for an
application that uses from 1000 to 1250, you enter 1000-
1250 as your settings. You can have up to three ranges
to define for this bandwidth allocation. Port numbers
can range from 1 to 65535. Check your application’s
documentation for details on the service ports used.
Select the protocol
TCP
or
UDP,
or select
Both
.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
MAC Address
Enter a Name
Enter a name for your device.
MAC Address
Enter the MAC address of your device.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
Ethernet Port
Ethernet
Select the Ethernet port that you want to use.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
Voice Device
Enter a Name
Enter a name for your voice device.
MAC Address.
Enter the MAC address of your voice
device.
Priority
Select the appropriate priority:
High
,
Medium
,
Normal
, or
Low
.
Click
Add
to save your changes. Your new entry will appear
in the Summary list.
Summary
This lists the QoS entries you have created for your
applications and devices.
Priority
This displays the bandwidth priority of
High
,
Medium
,
Normal
, or
Low
.
Name
This displays the application, device, or port
name.
Information
This displays the port range or MAC address
entered for your entry. If a pre-configured application or
game was selected, there will be no valid entry shown in
this section.
Remove
Click this button to remove an entry.
Edit
Click this button to make changes.
When you finish making changes to this screen, click
Save
Settings
to save the changes, or click
Cancel Changes
to
undo your changes. For more information, click
Help
.

Rate

124.8 / 5 based on 304 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top