Page 71 / 92 Scroll up to view Page 66 - 70
65
Appendix B: Wireless Security
Security Threats Facing Wireless Networks
Wireless-N Gigabit Gaming Router
1.
Disable Broadcast
2.
Make it unique
3.
Change it often
Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be
more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast
the SSID.
Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.)
Hackers know these defaults and can check these against your network. Change your SSID to something unique
and not something related to your company or the networking products you use.
Change your SSID regularly so that any hackers who have gained access to your wireless network will have to
start from the beginning in trying to break in.
MAC
Addresses
. Enable MAC Address filtering. MAC Address filtering will allow you to provide access to only
those wireless nodes with certain MAC Addresses. This makes it harder for a hacker to access your network with
a random MAC Address.
WEP Encryption
. Wired Equivalent Privacy (WEP) is often looked upon as a cure-all for wireless security
concerns. This is overstating WEP’s ability. Again, this can only provide enough security to make a hacker’s job
more difficult.
There are several ways that WEP can be maximized:
1.
Use the highest level of encryption possible
2.
Use “Shared Key” authentication
3.
Change your WEP key regularly
PSK
. Pre-shared Key (PSK) is the newest and best available standard in Wi-Fi security. Two modes are available:
PSK and Radius. PSK gives you a choice of two encryption methods: TKIP (Temporal Key Integrity Protocol), which
utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection
against hackers, and AES (Advanced Encryption System), which utilizes a symmetric 128-Bit block data
encryption. RADIUS (Remote Authentication Dial-In User Service) utilizes a RADIUS server for authentication.
IMPORTANT:
Always remember that each device
in your wireless network MUST use the same
security method and key, or else your wireless
network will not function properly.
Page 72 / 92
66
Appendix B: Wireless Security
Security Threats Facing Wireless Networks
Wireless-N Gigabit Gaming Router
PSK. If you do not have a RADIUS server, Select the type of algorithm, TKIP or AES, and enter a password in
the Passphrase field of 8-63 characters.
RADIUS. WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is
connected to the Router or other device.)
Implementing encryption may have a negative impact on your network’s performance, but if you are transmitting
sensitive data over your network, encryption should be used.
These security recommendations should help keep your mind at ease while you are enjoying the most flexible
and convenient technology Linksys has to offer.
Page 73 / 92
67
Appendix C: Upgrading Firmware
Wireless-N Gigabit Gaming Router
Appendix C: Upgrading Firmware
The Router's firmware is upgraded through the Web-based Utility's ADMINISTRATION tab. Follow these
instructions:
1.
Download the firmware from Linksys's website at
www.linksys.com
.
2.
Extract the firmware file on your computer.
3.
Open the Router’s Web-based Utility, and click the
ADMINISTRATION
tab.
4.
Click the
FIRMWARE UPGRADE
tab, and the
FIRMWARE UPGRADE
screen will appear.
5.
Enter the location of the firmware's file, or click the
Browse
button to find the file.
6.
Click
UPGRADE
, and follow the on-screen instructions.
Figure C-1: Firmware Upgrade
Page 74 / 92
68
Appendix D: Windows Help
Wireless-N Gigabit Gaming Router
Appendix D: Windows Help
Almost all Linksys wireless products require Microsoft Windows. Windows is the most used operating system in
the world and comes with many features that help make networking easier. These features can be accessed
through Windows Help and are described in this appendix.
TCP/IP
Before a computer can communicate with the Router, TCP/IP must be enabled. TCP/IP is a set of instructions, or
protocol, all PCs follow to communicate over a network. This is true for wireless networks as well. Your PCs will
not be able to utilize wireless networking without having TCP/IP enabled. Windows Help provides complete
instructions on enabling TCP/IP.
Shared Resources
If you wish to share printers, folder, or files over your network, Windows Help provides complete instructions on
utilizing shared resources.
Network Neighborhood/My Network Places
Other PCs on your network will appear under Network Neighborhood or My Network Places (depending upon the
version of Windows you're running). Windows Help provides complete instructions on adding PCs to your
network.
Page 75 / 92
69
Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter
Windows 2000 or XP Instructions
Wireless-N Gigabit Gaming Router
Appendix E: Finding the MAC Address and IP Address for
Your Ethernet Adapter
This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC
filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s
Ethernet adapter. This IP address is used for the Router’s filtering, forwarding, and/or DMZ features. Follow the
steps in this appendix to find the adapter’s MAC or IP address in Windows 2000 or XP.
Windows 2000 or XP Instructions
1.
Click
Start
and
Run
. In the
Open
field, enter
cmd
. Press the
Enter
key or click the
OK
button.
2.
At the command prompt, enter
ipconfig /all
. Then press the
Enter
key.
3.
Write down the Physical Address as shown on your computer screen (Figure E-1); it is the MAC address for
your Ethernet adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
The example in Figure E-1 shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may
show something different.
NOTE:
The MAC address is also called the Adapter Address.
Figure E-1: IP Configuration Screen

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top