1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT300N
    5. /
  5. 12
Page 56 / 90 Scroll up to view Page 51 - 55
50
Appendix A: Troubleshooting
Common Problems and Solutions
Wireless-N Broadband Router
•
For Windows 2000:
1.
Click
Start
,
Settings
, and
Control Panel
. Double-click
Network and Dial-Up Connections
.
2.
Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and
select the
Properties
option.
3.
In the Components checked are used by this connection box, highlight
Internet Protocol (TCP/IP)
,
and click the
Properties
button. Select
Use the following IP address
option.
4.
Enter a unique IP address that is not used by any other computer on the network connected to the
Router.
5.
Enter the Subnet Mask,
255.255.255.0
.
6.
Enter the Default Gateway,
192.168.1.1
(Router’s default IP address).
7.
Toward the bottom of the window, select
Use the following DNS server addresses
, and enter the
Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its
website to find the information.
8.
Click the
OK
button in the Internet Protocol (TCP/IP) Properties window, and click the
OK
button in the
Local Area Connection Properties window.
9.
Restart the computer if asked.
•
For Windows XP:
The following instructions assume you are running Windows XP with the default interface. If you are using
the Classic interface (where the icons and menus look like previous Windows versions), please follow the
instructions for Windows 2000.
1.
Click
Start
and
Control Panel
.
2.
Click the
Network and Internet Connections
icon and then the
Network Connections
icon.
3.
Right-click the
Local Area Connection
that is associated with the Ethernet adapter you are using,
and select the
Properties
option.
4.
In the This connection uses the following items box, highlight
Internet Protocol (TCP/IP)
. Click the
Properties
button.
5.
Enter a unique IP address that is not used by any other computer on the network connected to the
Router.
6.
Enter the Subnet Mask,
255.255.255.0
.
7.
Enter the Default Gateway,
192.168.1.1
(Router’s default IP address).
8.
Toward the bottom of the window, select
Use the following DNS server addresses
, and enter the
Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its
website to find the information.
9.
Click the
OK
button in the Internet Protocol (TCP/IP) Properties window. Click the
OK
button in the
Local Area Connection Properties window.
3.
I want to test my Internet connection.
A
Check your TCP/IP settings.
For Windows 98SE, Me, 2000, and XP:
•
Refer to Windows Help for details. Make sure Obtain IP address automatically is selected in the settings.
Page 57 / 90
51
Appendix A: Troubleshooting
Common Problems and Solutions
Wireless-N Broadband Router
B
Open a command prompt.
For Windows 98SE and Me:
•
Click
Start
and
Run
. In the
Open
field, type
command
. Press the
Enter
key or click the
OK
button.
For Windows 2000 and XP:
•
Click
Star
t and
Run
. In the
Open
field, type
cmd
. Press the
Enter
key or click the
OK
button. In the
command prompt, type
and press the
Enter
key.
•
If you get a reply, the computer is communicating with the Router.
•
If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is
selected in the TCP/IP settings for your Ethernet adapter.
C
In the command prompt, type
ping
followed by your Internet or WAN IP address and press the
Enter
key.
The Internet or WAN IP Address can be found on the Status screen of the Router’s web-based utility. For
example, if your Internet or WAN IP address is 1.2.3.4, you would enter
ping 1.2.3.4
and press the
Enter
key.
•
If you get a reply, the computer is connected to the Router.
•
If you do NOT get a reply, try the ping command from a different computer to verify that your original
computer is not the cause of the problem.
D
In the command prompt, type
ping www.yahoo.com
and press the
Enter
key.
•
If you get a reply, the computer is connected to the Internet. If you cannot open a webpage, try the ping
command from a different computer to verify that your original computer is not the cause of the problem.
•
If you do NOT get a reply, there may be a problem with the connection. Try the ping command from a
different computer to verify that your original computer is not the cause of the problem.
4.
I am not getting an IP address on the Internet with my Internet connection.
•
Refer to “Problem #3, I want to test my Internet connection” to verify that you have connectivity.
•
If you need to register the MAC address of your Ethernet adapter with your ISP, please see “Appendix E:
Finding the MAC address and IP Address for Your Ethernet Adapter.” If you need to clone the MAC address
of your Ethernet adapter onto the Router, see the System section of “Chapter 5: Configuring the
Wireless-N Broadband Router” for details.
•
Make sure you are using the right Internet connection settings. Contact your ISP to see if your Internet
connection type is DHCP, Static IP Address, or PPPoE (commonly used by DSL consumers). Please refer to
the Setup section of “Chapter 5: Configuring the Wireless-N Broadband Router” for details on Internet
connection settings.
•
Make sure you have the right cable. Check to see if the Internet column has a solidly lit Link/Act LED.
•
Make sure the cable connecting from your cable or DSL modem is connected to the Router’s Internet port.
Verify that the Status page of the Router’s web-based utility shows a valid IP address from your ISP.
•
Turn off the computer, Router, and cable/DSL modem. Wait 30 seconds, and then turn on the Router,
cable/DSL modem, and computer. Check the Status tab of the Router’s web-based utility to see if you get
an IP address.
Page 58 / 90
52
Appendix A: Troubleshooting
Common Problems and Solutions
Wireless-N Broadband Router
5.
I am not able to access the Setup page of the Router’s web-based utility.
•
Refer to “Problem #3, I want to test my Internet connection” to verify that your computer is properly
connected to the Router.
•
Refer to “Appendix E: Finding the MAC Address and IP address for Your Ethernet Adapter” to verify that
your computer has an IP Address, Subnet Mask, Gateway, and DNS.
•
Set a static IP address on your system; refer to “Problem #2: I need to set a static IP address.”
•
Refer to “Problem #10: I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up
window.”
6.
I need to set up a server behind my Router and make it available to the public.
To use a server like a web, ftp, or mail server, you need to know the respective port numbers they are using.
For example, port 80 (HTTP) is used for web; port 21 (FTP) is used for FTP, and port 25 (SMTP outgoing) and
port 110 (POP3 incoming) are used for the mail server.
You can get more information by viewing the
documentation provided with the server you installed.
Follow these steps to set up port forwarding through the Router’s web-based utility. We will be setting up
web, ftp, and mail servers.
1.
Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router.
Go to the Applications & Gaming => Port Range Forwarding tab.
2.
Enter any name you want to use for the Application Name.
3.
Enter the Start and End Port range of the service you are using. For example, if you have a web server,
you would enter the range 80 to 80.
4.
Select the protocol(s) you will be using, TCP and/or UDP.
5.
Enter the IP address of the PC or network device that you want the port server to go to. For example,
if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field
provided. Check “Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for
details on getting an IP address.
6.
Check the
Enabled
option for the port services you want to use. Consider the example below:
When you have completed the configuration, click the
Save Settings
button.
Application Name
Start and End Port
Protocol
To IP Address
Enabled
Web server
80 to 80
Both
192.168.1.100
X
FTP server
21 to 21
TCP
192.168.1.101
X
SMTP (outgoing)
25 to 25
Both
192.168.1.102
X
POP3 (incoming)
110 to 110
Both
192.168.1.102
X
Page 59 / 90
53
Appendix A: Troubleshooting
Common Problems and Solutions
Wireless-N Broadband Router
7.
I need to set up online game hosting or use other Internet applications.
If you want to play online games or use Internet applications, most will work without doing any port
forwarding or DMZ hosting.
There may be cases when you want to host an online game or Internet
application. This would require you to set up the Router to deliver incoming packets or data to a specific
computer.
This also applies to the Internet applications you are using. The best way to get the information on
what port services to use is to go to the website of the online game or application you want to use. Follow
these steps to set up online game hosting or use a certain Internet application:
1.
Access the Router’s web interface by going to http://192.168.1.1 or the IP address of the Router. Go to
the Applications & Gaming => Port Range Forwarding tab.
2.
Enter any name you want to use for the Application Name.
3.
Enter the Start and End Port range of the service you are using. For example, if you want to host
Unreal Tournament (UT), you would enter the range 7777 to 27900.
4.
Select the protocol(s) you will be using, TCP and/or UDP.
5.
Enter the IP address of the PC or network device that you want the port server to go to. For example,
if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field
provided. Check “Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for
details on getting an IP address.
6.
Check the
Enabled
option for the port services you want to use. Consider the example below:
When you have completed the configuration, click the
Save Settings
button.
8.
I can’t get the Internet game, server, or application to work.
If you are having difficulties getting any Internet game, server, or application to function properly, consider
exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an
application requires too many ports or when you are not sure which port services to use. Make sure you
disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority
over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding
settings. If the port number that the data enters from does not have port forwarding, then the Router will send
the data to whichever PC or network device you set for DMZ hosting.)
Application Name
Start and End Port
Protocol
To IP Address
Enabled
UT
7777 to 27900
Both
192.168.1.100
X
Halflife
27015 to 27015
Both
192.168.1.105
X
PC Anywhere
5631 to 5631
UDP
192.168.1.102
X
VPN IPSEC
500 to 500
UDP
192.168.1.100
X
Page 60 / 90
54
Appendix A: Troubleshooting
Common Problems and Solutions
Wireless-N Broadband Router
Follow these steps to set DMZ hosting:
1.
Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router.
Go to the Applications & Gaming => Port Range Forwarding tab.
2.
Disable or remove the entries you have entered for forwarding.
Keep this information in case you
want to use it at a later time.
3.
Go to the Applications & Gaming => DMZ tab.
4.
Select
Enabled
next to DMZ. For the computer you want exposed to the Internet, specify it by IP
address or MAC address. If you use its IP address, select
Destination IP Address
, and enter its IP
address the
Destination IP Address
field. If you use its MAC address, select
Destination MAC
Address
, and enter its MAC address in the
Destination MAC Address
field. Please refer to “Appendix
E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP
address. If you assigned a static IP address to the computer, then you can click the
DHCP
Reservation
button on the
Basic Setup
screen to look up its static IP address.
5.
Once completed with the configuration, click the
Save Settings
button.
9.
I forgot my password, or the password prompt always appears when I am saving settings to the
Router.
Reset the Router to factory default by pressing the Reset button for five seconds and then releasing it. If you
are still getting prompted for a password when saving settings, then perform the following steps:
1.
Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router.
Enter the default password
admin
, and click the Administration => Management tab.
2.
Enter a different password in the
Router Password
field, and enter the same password in the second
field to confirm the password.
3.
Click the
Save Settings
button.
10.I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.
If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for
the Internet connection, the computer does not need any proxy settings to gain access.
Please follow these
directions to verify that you do not have any proxy settings and that the browser you use is set to connect
directly to the LAN.
•
For Microsoft Internet Explorer 5.0 or higher:
1.
Click
Start,
Settings
, and
Control Panel
. Double-click Internet Options.
2.
Click the
Connections
tab.
3.
Click the
LAN settings
button and remove anything that is checked.
4.
Click the
OK
button to go back to the previous screen.
5.
Click the option
Never dial a connection
.
This will remove any dial-up pop-ups for PPPoE users.
•
For Netscape 4.7 or higher:
1.
Start
Netscape Navigator
, and click
Edit
,
Preferences
,
Advanced
, and
Proxies
.
2.
Make sure you have Direct connection to the Internet selected on this screen.
3.
Close all the windows to finish.

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top