Linksys WRT150N Router Manual PDF (Setup & Configuration Guide)

Page 36 / 90 Scroll up to view Page 31 - 35

30

Chapter 5: Configuring the Wireless-N Home Router

The Security Tab - VPN Passthrough

Wireless-N Home Router

The Security Tab - VPN Passthrough

The

VPN Passthrough

screen allows you to allow VPN tunnels using IPSec, L2TP, or PPTP protocols to pass

through the Router.

VPN Passthrough

IPSec Passthrough

. IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange

of packets at the IP layer. To allow IPSec Passthrough, click the

Enabled

button. To disable IPSec Passthrough,

click the

Disabled

button.

L2TP Passthrough

. Layer 2 Tunneling Protocol is the method used to enable Point-to-Point sessions via the

Internet on the Layer 2 level. To allow L2TP tunnels to pass through the Router, click the

Enabled

button. To

disable L2TP Passthrough, click the

Disabled

button.

PPTP Passthrough

. PPTP (Point-to-Point Tunneling Protocol) Passthrough allows the Point-to-Point (PPP) to be

tunneled through an IP network. To allow PPTP Passthrough, click the

Enabled

button. To disable PPTP

Passthrough, click the

Disabled

button.

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. For more information, click

Help

.

Figure 5-25: VPN Passthrough

ipsec

: a VPN protocol used to implement secure

exchange of packets at the IP layer.

pptp

: a VPN protocol that allows the Point to Point

Protocol (PPP) to be tunneled through an IP network.

This protocol is also used as a type of broadband

connection in Europe.

vpn

: a security measure to protect data as it leaves

one network and goes to another over the Internet.

Page 37 / 90

31

Chapter 5: Configuring the Wireless-N Home Router

The Access Restrictions Tab - Internet Access Policy

Wireless-N Home Router

The Access Restrictions Tab - Internet Access Policy

The

Internet Access Policy

screen allows you to block or allow specific kinds of Internet usage and traffic, such as

Internet access, designated services, websites, and inbound traffic during specific days and times.

Internet Access Policy

Access Policy

. Access can be managed by a policy. Use the settings on this screen to establish an access policy

(after the

Save Settings

button is clicked). Selecting a policy from the drop-down menu will display that policy’s

settings. To delete a policy, select that policy’s number and click the

Delete This Policy

button. To view all the

policies, click the

Summary

button.

On the

Summary

screen, the policies are listed with the following information: No., Policy Name, Access, Days,

Time, and status (Enabled). To enable a policy, click the

Enabled

checkbox. To delete a policy, click its

Delete

button. Click the

Save Settings

button to save your changes, or click the

Cancel Changes

button to cancel your

changes. To return to the

Internet Access Policy

screen, click the

Close

button.

Status

. Policies are disabled by default. To enable a policy, select the policy number from the drop-down menu,

and click the radio button beside

Enabled

.

To create a policy:

1.

Select a number from the

Access Policy

drop-down menu.

2.

Enter a Policy Name in the field provided.

3.

To enable this policy, click the radio button beside

Enabled

.

4.

Click the

Edit List

button to select which PCs will be affected by the policy. The

List of PCs

screen will appear.

You can select a PC by MAC address or IP address. You can also enter a range of IP addresses if you want this

policy to affect a group of PCs. After making your changes, click the

Save Settings

button to apply your

changes or

Cancel Changes

to cancel your changes.

5.

Click the appropriate option,

Deny

or

Allow

, depending on whether you want to block or allow Internet access

for the PCs you listed on the

List of PCs

screen.

6.

Decide which days and what times you want this policy to be enforced. Select the individual days during

which the policy will be in effect, or select

Everyday

. Then enter a range of hours and minutes during which

the policy will be in effect, or select

24 Hours

.

Figure 5-26: Access Restrictions Tab - Internet Access

Policy

Figure 5-27: Summary

Page 38 / 90

32

Chapter 5: Configuring the Wireless-N Home Router

The Access Restrictions Tab - Internet Access Policy

Wireless-N Home Router

7.

You can block websites with specific URL addresses. Enter each URL in a separate field next to

Website

Blocking by URL Address

.

8.

You can also block websites using specific keywords. Enter each keyword in a separate field next to

Website

Blocking by Keyword

.

9.

You can filter access to various services accessed over the Internet, such as FTP or telnet. (You can block up

to three applications per policy.)

From the Applications list, select the application you want to block. Then click the

>>

button to move it to the

Blocked List. To remove an application from the Blocked List, select it and click the

<<

button.

10. If the application you want to block is not listed or you want to edit a service’s settings, enter the application’s

name in the

Application Name

field. Enter its range in the

Port Range

fields. Select its protocol from the

Protocol

drop-down menu. Then click the

Add

button.

To modify a service, select it from the Application list. Change its name, port range, and/or protocol setting.

Then click the

Modify

button.

To delete a service, select it from the Application list. Then click the

Delete

button.

11. Click the

Save Settings

button to save the policy’s settings. To cancel the policy’s settings, click the

Cancel

Changes

button.

For more information, click

Help

.

Figure 5-28: List of PCs

Page 39 / 90

33

Chapter 5: Configuring the Wireless-N Home Router

The Applications & Gaming Tab - Single Port Forwarding

Wireless-N Home Router

The Applications & Gaming Tab - Single Port Forwarding

When you click the Applications & Gaming tab, you will see the

Single Port Forwarding

screen. You can customize

port services for common applications on this screen.

When users send these types of requests to your network via the Internet, the Router will forward those requests

to the appropriate servers (computers). Before using forwarding, you should assign static IP addresses to the

designated servers (use the DHCP Reservation feature on the

Basic Setup

screen).

Single Port Forwarding

Common applications are available for the first five entries. Select the appropriate application. Then enter the IP

address of the server that should receive these requests. Click the

Enabled

checkbox to activate this entry.

For additional applications, complete the following fields:

Application Name

. Enter the name of the application.

External Port

. Enter the external port number used by the server or Internet application. Check with the Internet

application documentation for more information.

Internal Port

. Enter the internal port number used by the server or Internet application. Check with the Internet

application documentation for more information.

Protocol

. Select the protocol

TCP

or

UDP

, or select

Both

.

To IP Address

. Enter the IP address of the server that should receive the requests. To find the IP address, go to

“Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter.” If you assigned a static IP

address to the server, then you can click the

DHCP Reservation

button on the

Basic Setup

screen to look up its

static IP address.

Enabled

. Click the

Enabled

checkbox to enable the applications you have defined. This is disabled (unchecked)

by default.

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. For more information, click

Help

.

Figure 5-29: Applications & Gaming Tab -

Single Port Forwarding

tcp

: a network protocol for transmitting data that

requires acknowledgement from the recipient of

data sent.

udp

: a network protocol for transmitting data

that does not require acknowledgement from

the recipient of the data that is sent.

Page 40 / 90

34

Chapter 5: Configuring the Wireless-N Home Router

The Applications & Gaming Tab - Port Range Forwarding

Wireless-N Home Router

The Applications & Gaming Tab - Port Range Forwarding

Port range forwarding sets up public services on your network, such as web servers, ftp servers, e-mail servers,

or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet

access to perform functions such as videoconferencing or online gaming. Some Internet applications may not

require any forwarding.)

When users send these types of requests to your network via the Internet, the Router will forward those requests

to the appropriate servers (computers). Before using forwarding, you should assign static IP addresses to the

designated servers (use the DHCP Reservation feature on the

Basic Setup

screen).

If you need to forward all ports to one PC, click the

DMZ

tab.

Port Range Forwarding

To add an application, complete the following fields:

Application Name

. Enter the name of the application.

Start ~ End Port

. Enter the number or range of port(s) used by the server or Internet application. Check with the

Internet application documentation for more information.

Protocol

. Select the protocol

TCP

or

UDP

, or select

Both

.

To IP Address

. Enter the IP address of the server that you want the Internet users to be able to access. To find

the IP address, go to “Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter.” If you

assigned a static IP address to the server, then you can click the

DHCP Reservation

button on the

Basic Setup

screen to look up its static IP address.

Enabled

. Click the

Enabled

checkbox to enable the applications you have defined. This is disabled (unchecked)

by default.

When you have finished making changes to this screen, click the

Save Settings

button to save the changes, or

click the

Cancel Changes

button to undo your changes. For more information, click

Help

.

Figure 5-30: Applications & Gaming Tab -

Port Range Forwarding

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share