1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRP400
    5. /
  5. 17
Page 81 / 155 Scroll up to view Page 76 - 80
Configuring Applications and Gaming
Applications & Gaming > Port Range Triggering
Cisco WRP400 User Guide
79
8
Applications & Gaming > Port Range Triggering
The Port Range Triggering screen allows the WRP400 to watch outgoing data for
specific port numbers. The IP address of the computer that sends the matching
data is remembered by the WRP400, so that when the requested data returns
through the WRP400, the data is pulled back to the proper computer by way of IP
address and port mapping rules.
NOTE
After you enter settings on this page, click Save Settings to apply your changes, or
click Cancel Changes to cancel your changes.
Figure 39
Applications and Gaming > Port Range Triggering
•
Application Name:
Enter the application name of the trigger.
•
Triggered Range:
For each application, enter the starting and ending port
numbers of the triggered port number range. Check with the Internet
application documentation for the port number(s) needed.
•
Forwarded Range:
For each application, enter the starting and ending port
numbers of the forwarded port number range. Check with the Internet
application documentation for the port number(s) needed.
•
Enabled:
Select Enabled to enable port triggering for the applications you
have defined.
Page 82 / 155
Configuring Applications and Gaming
Applications and Gaming > DMZ
Cisco WRP400 User Guide
80
8
Applications and Gaming > DMZ
The DMZ feature allows one network computer to be exposed to the Internet for
use of a special-purpose service such as Internet gaming or videoconferencing.
DMZ hosting forwards all the ports at the same time to one PC. The Port Range
Forwarding feature is more secure because it only opens the ports you want to
have opened, while DMZ hosting opens all the ports of one computer, exposing
the computer to the Internet.
NOTE
After you enter settings on this page, click Save Settings to apply your changes, or
click Cancel Changes to cancel your changes.
Figure 40
Applications and Gaming > DMZ
Any PC whose port is being forwarded must have its DHCP client function
disabled and should have a new static IP address assigned to it because its IP
address may change when using the DHCP function.
•
Enabled/Disabled:
To disable DMZ hosting, select Disabled. To expose one
PC, select Enabled. Then configure the following settings:
•
Source IP Address:
If you want any IP address to be the source, select Any
IP Address. If you want to specify an IP address or range of IP addresses as
the designated source, select and complete the IP address range fields.
Page 83 / 155
Configuring Applications and Gaming
Applications and Gaming > QoS
Cisco WRP400 User Guide
81
8
•
Destination:
If you want to specify the DMZ host by IP address, select IP
Address and enter the IP address in the field provided. If you want to
specify the DMZ host by MAC address, select MAC Address and enter the
MAC address in the field provided.
•
DHCP Client Table:
Click this button to view a list of DHCP clients. See
“DHCP Client Table.”
This button becomes available when you select the
MAC Address option.
DHCP Client Table
The DHCP Client Table lists computers and other devices that have been assigned
IP addresses by the WRP400. The list can be sorted by Client Name, IP Address,
and MAC Address. To select a DHCP client, click Select. To retrieve the most up-
to-date information, click Refresh. To exit this screen and return to the DMZ screen,
click Close.
Applications and Gaming > QoS
Quality of Service (QoS) ensures better service to high-priority types of network
traffic, which may involve demanding, real-time applications, such as
videoconferencing.
NOTE
Click Save Settings to apply your changes, or click Cancel Changes to cancel your
changes.
Page 84 / 155
Configuring Applications and Gaming
Applications and Gaming > QoS
Cisco WRP400 User Guide
82
8
Figure 41
Applications and Gaming > QoS
Wireless
•
WMM Support:
If you have other devices that support Wi-Fi Multimedia
(WMM) on your network, select
E
nabled. Otherwise, keep the default,
Disabled.
•
No Acknowledgement:
To prevent the WRP400 from resending data if an
error occurs, select Enabled. Otherwise, keep the default, Disabled.
Page 85 / 155
Configuring Applications and Gaming
Applications and Gaming > QoS
Cisco WRP400 User Guide
83
8
Internet Access Priority
In this section, you can set the bandwidth priority for a variety of applications and
devices. There are four levels priority: High, Medium, Normal, or Low. When you set
priority, do not set all applications to High, because this will defeat the purpose of
allocating the available bandwidth. If you want to select below normal bandwidth,
select Low. Depending on the application, a few attempts may be needed to set
the appropriate bandwidth priority.
•
Enabled/Disabled:
To use the QoS policies you have set, keep the default,
Enabled. Otherwise, select Disabled.
•
Upstream Bandwidth:
To allow the WRP400 to control the maximum
bandwidth for upstream data transmissions, keep the default, Auto. To
manually set the maximum, select Manual, and enter the appropriate
number in the field provided.
Category
There are four categories available. Select one of the following: Application, Online
Games, MAC Address, or Ethernet Port. Proceed to the instructions for your
selection.
Application
•
Application:
Select the appropriate application. If you select Add a New
Application, follow the instructions for adding a new application.
•
Priority:
Select the appropriate priority: High, Medium (Recommend),
Normal, or
L
ow.
Adding a New Application

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top