Page 16 / 41 Scroll up to view Page 11 - 15
Chapter 3
Advanced Configuration
13
Wireless-N Access Point with Dual-Band
Before upgrading the firmware, download the Access Point’s
firmware upgrade file from
www.linksysbycisco.com
.
Firmware Upgrade
Please select a file to upgrade the firmware
Click
Browse
and select the firmware upgrade file. Then c
lick
Start to Upgrade
and follow the on-screen instructions.
WARNING:
The firmware upgrade must not
be interrupted; do not reboot or power off the
Access Point during the firmware upgrade..
Status > Access Point
The Access Point’s current status information is displayed.
Status > Access Point
Access Point Information
Firmware Version
The Access Point’s current firmware
version is displayed.
Local Network
Local MAC Address
The Access Point’s MAC Address, as
seen on your local, wired Ethernet network, is displayed.
Access Point IP Address
The Access Point’s IP Address, as
seen on your local network, is displayed.
Subnet Mask
The Subnet Mask configured for your local
network is displayed.
Default Gateway
The Default Gateway configured for
your local network is displayed.
Status > Wireless Network
Information about your wireless network is displayed.
Status > Wireless Network
MAC Address
The Access Point’s MAC Address, as seen
on your local, wireless network, is displayed.
Mode
The wireless mode used by the network is
displayed.
Network Name (SSID)
The wireless network name or
SSID is displayed.
Wireless Band
The radio band used the Access Point is
displayed.
Channel Width
The channel width setting, in MHz, is
displayed.
Wide Channel
Depending on the channel settings of
your Access Point, the Wide Channel is displayed.
Standard Channel
The Standard Channel setting is
displayed.
Security
The security method used by the Access Point
is displayed.
SSID Broadcast
The status of SSID broadcast (enabled or
disabled) is displayed.
Status > About
Information about the browser-based utility is displayed.
Status > About
Web Server
Powered By
The web server of the browser-based utility
is displayed.
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 41
Appendix A
Troubleshooting
14
Wireless-N Access Point with Dual-Band
Appendix A:
Troubleshooting
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the
same on both the computer and the Access Point. If you
have enabled wireless security, then make sure the same
security method and key are used by both the computer
and the Access Point.
The Access Point’s IP address needs to be changed.
If the Access Point is connected to a network with a DHCP
server (usually the network router), then the Access Point
will obtain its IP address from the DHCP server.
If you want the Access Point to always use a static IP
address, then follow these instructions:
1. Access
the
browser-based
utility
of
the
Access
Point
(refer
to
“Chapter
3:
Advanced Configuration” on page 3
).
2. Click the
Setup
tab.
3. From the
Access Point IP
drop-down menu, select
Static IP
.
4. Complete the
Static IP Address
,
Subnet Mask
, and
Default Gateway
fields.
5. Click
Save Settings
.
The
browser-based
utility
does
not
accept
your
password.
Check the following:
The password is case-sensitive. Make sure that you are
using the correct case(s) when entering the password.
If you forget your password, you can reset the Access
Point to its factory defaults.
Press and hold the Access Point’s
Reset
button for
approximately five seconds; the password will be reset
to its factory default,
admin
. All other Access Point
settings will be reset to the factory defaults as well. (To
access the browser-based utility, enter
admin
in the
Password
field.)
After you make changes through the browser-based
utility, the new settings are not displayed on-screen.
On your web browser, click
Refresh
. If the new settings
are not displayed, then follow these instructions:
1.
Unplug the power adapter from the Access Point.
2. Wait five seconds, and then plug the power adapter
back into the Access Point.
3.
On your web browser, click
Refresh
.
WEB:
If your questions are not addressed
here,
refer
to
the
Linksys
website,
www.linksysbycisco.com
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 41
Appendix B
Specifications
15
Wireless-N Access Point with Dual-Band
Appendix B:
Specifications
Model
WAP610N
Standards
IEEE 802.3u, 802.11g, 802.11b,
802.11a, Draft 802.11n
LEDs
Power, Ethernet, Wi-Fi Protected
Setup™, Wireless
Ports
Ethernet, Power
Buttons
Reset, Wi-Fi Protected Setup™
Cabling Type
CAT5
No. of Antennas
3 (internal)
Detachable (Yes/No) No
Modulations
802.11a: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
802.11b: CCK/QPSK, BPSK
802.11g: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
802.11n: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
RF Power (EIRP)
802.11a: 15 dBm (typical) @
in dBm
54Mbps
802.11b: 18 dBm (typical) @
11 Mbps
802.11g: 16 dBm (typical) @
54 Mbps
802.11n: 12 dBm (typical) @
130 Mbps (HT20), 270 Mbps (HT40)
Receive Sensitivity
802.11a: -72 dBm (typical) @
in dBm
54 Mbps
802.11b: -85 dBm (typical) @
11 Mbps
802.11g: -73 dBm (typical) @
54 Mbps
802.11n: -70 dBm (typical) @
MCS15/2.4 GHz,
-69 dBm (typical) @
MCS15/5.0 GHz
Antenna Gain in dBi
2.4 GHz: 1.58
5 GHz: 1.45
Wireless Security
WEP, Wi-Fi Protected Access™ 2
(WPA2), Wireless MAC Filtering
Security Key Bits
Up to 128-Bit Encryption
OS Requirements
Windows XP, Vista, or Vista 64-Bit
Edition with Latest Updates (for
Setup Wizard only)
Environmental
Dimensions
5.71" x 4.17" x 2.05"
(145 x 106 x 52 mm)
Weight
5.61 oz (159 g)
Power
12V, 1A
Certification
FCC, UL/cUL, ICES-003, RSS210,
Wi-Fi (IEEE 802.11a/b/g/draft n),
WPA2™, Wi-Fi Protected Setup™,
WMM®, CE
Operating Temp.
32 to 104ºF (0 to 40ºC)
Storage Temp.
-4 to 140ºF (-20 to 60ºC)
Operating Humidity
10 to 85% Noncondensing
Storage Humidity
5 to 90% Noncondensing
Specifications are subject to change without notice.
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 41
Appendix C
Warranty Information
16
Wireless-N Access Point with Dual-Band
Appendix C:
Warranty Information
Limited Warranty
Linksys warrants this Linksys hardware product against
defects in materials and workmanship under normal
use for the Warranty Period, which begins on the date of
purchase by the original end-user purchaser and lasts for
the period specified below:
One (1) year for new product
Ninety (90) days for refurbished product
Your exclusive remedy and Linksys’ entire liability under
this limited warranty will be for Linksys, at its option, to
(a) repair the product with new or refurbished parts,
(b) replace the product with a reasonably available
equivalent new or refurbished Linksys product, or (c) refund
the purchase price of the product less any rebates. Any
repaired or replacement products will be warranted for
the remainder of the original Warranty Period or thirty (30)
days, whichever is longer. All products and parts that are
replaced become the property of Linksys.
Linksys additionally warrants that any media on which
the software may be provided will be free from defects in
materials and workmanship under normal use for a period
of ninety (90) days from the date of original purchase.
Your exclusive remedy and Linksys’ entire liability under
this limited warranty will be for Linksys, at its option, to
(a) replace the software media, or (b) refund the purchase
price of the software media.
Exclusions and Limitations
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Linksys,
(c) the product damage was caused by use with non-
Linksys products, (d) the product has not been installed,
operated, repaired, or maintained in accordance with
instructions supplied by Linksys, (e) the product has
been subjected to abnormal physical or electrical stress,
misuse, negligence, or accident, (f) the serial number on
the Product has been altered, defaced, or removed, or
(g) the product is supplied or licensed for beta, evaluation,
testing or demonstration purposes for which Linksys does
not charge a purchase price or license fee.
EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET FORTH
ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, ALL SOFTWARE PROVIDED BY LINKSYS
WITH THE PRODUCT, WHETHER FACTORY LOADED ON THE
PRODUCT OR CONTAINED ON MEDIA ACCOMPANYING
THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY
OF ANY KIND. Without limiting the foregoing, Linksys does
not warrant that the operation of the product or software
will be uninterrupted or error free. Also, due to the
continual development of new techniques for intruding
upon and attacking networks, Linksys does not warrant
that the product, software or any equipment, system or
network on which the product or software is used will be
free of vulnerability to intrusion or attack. The product
may include or be bundled with third party software or
service offerings. This limited warranty shall not apply to
such third party software or service offerings. This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require.
TO THE
EXTENT
NOT
PROHIBITED
BY
APPLICABLE
LAW,
ALL
IMPLIED
WARRANTIES
AND
CONDITIONS
OF
MERCHANTABILITY,
SATISFACTORY
QUALITY
OR
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE DURATION OF THE WARRANTY PERIOD. ALL OTHER
EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS
AND WARRANTIES ARE DISCLAIMED. Some jurisdictions
do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This
limited warranty gives you specific legal rights, and you
may also have other rights which vary by jurisdiction.
TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,
IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST
DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES,
REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING
NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE
OF OR INABILITY TO USE THE PRODUCT, SOFTWARE OR
ANY SERVICES PROVIDED IN RESPECT OF SUCH PRODUCT
OR SOFTWARE, EVEN IF LINKSYS HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
TO THE EXTENT
NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT WILL
LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU
FOR THE PRODUCT.
The foregoing limitations will apply
even if any warranty or remedy provided under this limited
warranty fails of its essential purpose. Some jurisdictions
do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you.
Obtaining Warranty Service
If
you
have
a
question
about
your
product
or
experience
a
problem
with
it,
please
go
to
www.linksysbycisco.com/support
where you will find a
variety of online support tools and information to assist
you with your product. If the product proves defective
during the Warranty Period, contact Linksys Technical
Support for instructions on how to obtain warranty service.
The telephone number for Linksys Technical Support in
your area can be found in the product User Guide and
at
www.linksysbycisco.com
. Have your product serial
number and proof of purchase on hand when calling. A
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 41
Appendix C
Warranty Information
17
Wireless-N Access Point with Dual-Band
DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO
PROCESS WARRANTY CLAIMS. If you are requested to
return your product, you will be given a Return Materials
Authorization (RMA) number. You are responsible for
properly packaging and shipping your product to Linksys
at your cost and risk. You must include the RMA number
and a copy of your dated proof of original purchase when
returning your product. Products received without a RMA
number and dated proof of original purchase will be
rejected. Do not include any other items with the product
you are returning to Linksys. Defective product covered
by this limited warranty will be repaired or replaced and
returned to you without charge. Customers outside of
the United States of America and Canada are responsible
for all shipping and handling charges, custom duties,
VAT and other associated taxes and charges. Repairs or
replacements not covered under this limited warranty will
be subject to charge at Linksys’ then-current rates.
Technical Support
This
limited
warranty
is
neither
a
service
nor
a
support contract.
Information about Linksys’ current
technical
support
offerings
and
policies
(including
any
fees
for
support
services)
can
be
found
at
www.linksysbycisco.com/support
.
This limited warranty is governed by the laws of the
jurisdiction in which the Product was purchased by you.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top