1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WAP54Gv3
    5. /
  5. 2
Page 6 / 61 Scroll up to view Page 1 - 5
Wireless-G Access Point
Figure B-1: The WEP Screen
43
Figure B-2: The WPA Pre-Shared Key Screen
44
Figure B-3: The WPA Radius Screen
44
Figure B-4: The Radius Screen
44
Figure C-1: Upgrade Firmware
45
Page 7 / 61
1
Chapter 1: Introduction
Welcome
Wireless-G Access Point
Chapter 1: Introduction
Welcome
Thank you for choosing the Wireless-G Access Point. This Access Point will allow you to network wirelessly better
than ever.
How does the Access Point do all of this? An access point allows for greater range and mobility within your
wireless network while also allowing you to connect the wireless network to a wired environment. Being a dual-
band access point, not only does the Access Point bring you these benefits, it also allows two wireless standards,
802.11g and 802.11b, to communicate with each other. This means that PCs with different wireless standards
can communicate with each other and with a wired network.
But what does all of this mean?
Networks are useful tools for sharing computer resources. You can access one printer from different computers
and access data located on another computer's hard drive. Networks are even used for playing multiplayer video
games. So, networks are not only useful in homes and offices, they can also be fun.
PCs on a wired network create a LAN, or Local Area Network. They are connected with Ethernet cables, which is
why the network is called "wired".
PCs equipped with wireless cards and adapters can communicate without cumbersome cables. By sharing the
same wireless settings, within their transmission radius, they form a wireless network. This is sometimes called
a WLAN, or Wired Local Area Network. The Access Point bridges wireless networks of both 802.11g and 802.11b
standards and wired networks.
Use the instructions in this Guide to help you connect the Access Point, set it up, and configure it to bridge your
different networks. These instructions should be all you need to get the most out of the Access Point.
802.11b:
a wireless networking standard that specifies
a maximum data transfer rate of 11Mbps and an
operating frequency of 2.4GHz.
802.11g:
a wireless networking standard that
specifies a maximum data transfer rate of
54Mbps, an operating frequency of 2.4GHz, and
backward compatibility with 802.11b devices.
adapter:
a device that adds network functionality to your PC
ethernet:
network protocol that specifies how data is placed
on and retrieved from a common transmission medium
lan (local area network):
the computers and networking
products that make up your local network
network:
a series of computers or devices
connected together
Page 8 / 61
2
Chapter 1: Introduction
What’s in this Guide?
Wireless-G Access Point
What’s in this Guide?
This user guide covers the steps for setting up and using the Wireless-G Access Point.
•
Chapter 1: Introduction
This chapter describes the Wireless-G Access Point’s applications and this User Guide.
•
Chapter 2: Planning your Wireless Network
This chapter describes the basics of wireless networking.
•
Chapter 3: Getting to Know the Wireless-G Access Point
This chapter describes the physical features of the Access Point.
•
Chapter 4: Connecting the Wireless-G Access Point
This chapter instructs you on how to connect the Access Point to your network.
•
Chapter 5: Setting Up the Wireless-G Access Point
This chapter explains how to use the Web-Based Utility to configure the settings on the Access Point.
•
Chapter 6: Configuring the Wireless-G Access Point
This chapter explains the use of the Access Point’s Web-based Utility.
•
Appendix A: Troubleshooting
This appendix describes some frequently asked questions regarding installation and use of the Wireless-G
Access Point.
•
Appendix B: Wireless Security
This appendix explains the risks of wireless networking and some solutions to reduce the risks.
•
Appendix C: Upgrading Firmware
This appendix instructs you on how to upgrade the Access Point’s firmware.
•
Appendix D: Windows Help.
This appendix describes some of the ways Windows can help you with wireless networking.
•
Appendix E: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
•
Appendix F: Specifications
This appendix provides the Access Point’s technical specifications.
Page 9 / 61
3
Chapter 1: Introduction
What’s in this Guide?
Wireless-G Access Point
•
Appendix G: Warranty Information
This appendix supplies the Access Point’s warranty information.
•
Appendix H: Regulatory Information
This appendix supplies the Access Point’s regulatory information.
•
Appendix I: Contact Information
This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Page 10 / 61
4
Chapter 2: Planning your Wireless Network
Network Topology
Wireless-G Access Point
Chapter 2: Planning your Wireless Network
Network Topology
A wireless network is a group of computers, each equipped with one wireless adapter.
Computers in a wireless
network must be configured to share the same radio channel. Several PCs equipped with wireless cards or
adapters can communicate with one another to form an ad-hoc network.
Linksys wireless adapters also provide users access to a wired network when using an access point, such as the
Wireless-G Access Point, or wireless router.
An integrated wireless and wired network is called an infrastructure
network. Each wireless PC in an infrastructure network can talk to any computer in a wired network
infrastructure via the access point or wireless router.
An infrastructure configuration extends the accessibility of a wireless PC to a wired network, and may double the
effective wireless transmission range for two wireless adapter PCs.
Since an access point is able to forward data
within a network, the effective transmission range in an infrastructure network may be doubled.
Roaming
Infrastructure mode also supports roaming capabilities for mobile users. Roaming means that you can move your
wireless PC within your network and the access points will pick up the wireless PC's signal, providing that they
both share the same channel and SSID.
Before enabling you consider roaming, choose a feasible radio channel and optimum access point position.
Proper access point positioning combined with a clear radio signal will greatly enhance performance.
infrastructure
: a wireless network
that is bridged to a wired network via
an access point.
ad-hoc
: a group of wireless devices
communicating directly with each other (peer-
to-peer) without the use of an access point.
roaming
: the ability to take a wireless device
from one access point's range to another
without losing the connection.
ssid
: your wireless network's name

Rate

4 / 5 based on 1 vote.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top