52

Appendix F: Specifications

Wireless-G Access Point

Operating Humidity

10% to 85% Non-Condensing

Storage Humidity

5% to 90% Non-Condensing

53

Appendix G: Warranty Information

Wireless-G Access Point

Appendix G: Warranty Information

LIMITED WARRANTY

Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially

free of defects in materials and workmanship under normal use.

Your exclusive remedy and Linksys' entire liability under

this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any

rebates.

This limited warranty extends only to the original purchaser.

If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return

Authorization Number, if applicable.

BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING.

If You are

requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a

copy of your original proof of purchase.

RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE.

You

are responsible for shipping defective Products to Linksys.

Linksys pays for UPS Ground shipping from Linksys back to You

only.

Customers located outside of the United States of America and Canada are responsible for all shipping and handling

charges.

ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED

TO THE DURATION OF THE WARRANTY PERIOD.

ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.

Some jurisdictions do not

allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You.

This warranty gives

You specific legal rights, and You may also have other rights which vary by jurisdiction.

This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated,

repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal

physical or electrical stress, misuse, negligence, or accident.

In addition, due to the continual development of new

techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of

vulnerability to intrusion or attack.

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR

PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY

OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT

(INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN NO EVENT

WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.

The foregoing limitations will apply even

if any warranty or remedy provided under this Agreement fails of its essential purpose.

Some jurisdictions do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You.

Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.

54

Appendix H:

Wireless-G Access Point

Appendix H: Regulatory Information

FCC STATEMENT

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used according to the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which is found by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment or devices

Connect the equipment to an outlet other than the receiver's

Consult a dealer or an experienced radio/TV technician for assistance

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This

equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

INDUSTRY CANADA (CANADA)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The use of this device in a system operating either partially or completely outdoors may require the user to obtain

a license for the system according to the Canadian regulations.

EC DECLARATION OF CONFORMITY (EUROPE)

Linksys declares that the Wireless-G ADSL Gateway conforms to the specifications listed below, following the

provisions of the European R&TTE directive 1999/5/EC:

EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment.

EN 609 50 Safety

55

Appendix H:

Wireless-G Access Point

EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment.

Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to

certain frequencies and/or may require a license for operation.

Contact local Authority for procedure to follow.

Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent

isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not

allowed for use within the European community and countries that have adopted the European R&TTE directive

1999/5/EC.

For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance.

Linksys vakuuttaa täten että Wireless-G ADSL Gateway tyyppinen laite on direktiivin 1999/5/EY oleellisten

vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen.

Linksys Group déclare la Passerelle ADSL sans fil-G est conforme aux conditions essentielles et aux dispositions

relatives à la directive 1999/5/EC.

Belgique:

Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace

public, aucun

enregistrement n'est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un

enregistrement auprès de l'IBPT est requise. Pour une utilisation publique à l'extérieur de bâtiments, une licence

de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT.

France:

2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respectivement) sont complétement

libres d'utilisation en France (en utilisation intérieur). Pour ce qui est des autres canaux, ils peuvent être soumis

à autorisation selon le départment. L'utilisation en extérieur est soumis à autorisation préalable et très restreint.

Vous pouvez contacter l'Autorité de Régulation des Télécommunications (http://www.art-telecom.fr) pour de plus

amples renseignements.

FCC PART 68 STATEMENT

This equipment complies with Part 68 of the FCC Rules. A label is attached to the equipment that contains,

among other information, its FCC registration number and ringer equivalence number.

If requested, this

information must be provided to the telephone company.

This equipment uses the following USOC Jack: RJ-11.

56

Appendix H:

Wireless-G Access Point

An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed

to be connected to the telephone network or premises wiring using a compatible modular jack, which is FCC Part

68 compliant. Connection to the telephone network should be made by using the standard modular telephone

jack.

The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have

all of those devices ring when your telephone number is called.

In most, but not all areas, the sum of RENs

should not exceed 5.

To be certain of the number of devices that may be connected to the line, as determined by

the total RENs, contact the telephone company to determine the maximum REN for the calling area.

If this equipment causes harm to the telephone network, the telephone company may discontinue your service

temporarily.

If advance notice is not practical, the telephone company will notify the customer as soon as

possible.

Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could

affect the operation of the equipment.

If this happens, the telephone company will provide advance notice in

order for you to make the necessary modifications in order to maintain uninterrupted service.

In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try using

another FCC approved device in the same telephone jack.

If the trouble persists, call the telephone company

repair service bureau.

If the trouble does not persist and appears to be with this unit, disconnect the unit from

the telephone line and discontinue use of the unit until it is repaired.

Please note that the telephone company

may ask that you disconnect the equipment from the telephone network until the problem has been corrected or

until you are sure that the equipment is not malfunctioning. The user must use the accessories and cables

supplied by the manufacturer to get optimum performance from the product.

No repairs may be done by the customer. If trouble is experienced with this equipment, please contact your

authorized support provider for repair and warranty information.

If the trouble is causing harm to the telephone

network, the telephone company may request you remove the equipment from the network until the problem is

resolved.

This equipment cannot be used on telephone company provided coin service.

Connection to Party Line

Service is subject to state tariffs.

SAFETY NOTICES

Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line

cord.

Do not use this product near water, for example, in a wet basement or near a swimming pool.

Avoid using this product during an electrical storm.

There may be a remote risk of electric shock from lightning.