Page 6 / 69 Scroll up to view Page 1 - 5
Wireless-N Access Point with Power Over Ethernet
Figure 6-18: Administration - Management
28
Figure 6-19: The Administration - Log
30
Figure 6-20: Administration - Factory Default
32
Figure 6-21: Administration - Firmware Upgrade
32
Figure 6-22: Administration - Reboot
33
Figure 6-23: Administration - Config
Management
34
Figure 6-24: Status - Local Network
35
Figure 6-25: Status - Wireless
36
Figure 6-26: Status - System Performance
37
Figure C-1: Firmware Upgrade
47
Page 7 / 69
1
Chapter 1: Introduction
Welcome
Wireless-N Access Point with Power Over Ethernet
Chapter 1: Introduction
Welcome
Thank you for choosing the Wireless-N Access Point with Power Over Ethernet. This Access Point will allow you to
network wirelessly better than ever. An access point allows for greater range and mobility within your wireless
network while also allowing you to connect the wireless network to a wired environment. The Wireless-N Access
Point also offers the convenience of Power over Ethernet (PoE) capability (in addition to regular 12VDC power
adaptor), so it can receive data and power over a single Ethernet network cable.
This Access Point supports the latest 802.11n draft Specification by IEEE early 2006. It also support 802.11g and
802.11b clients in a mixed environment. This Access Point currently can support an 11n data rate up to 300
Mbps. Besides the higher data rate, 802.11n technology also promises longer coverage by using multiple
antennas to transmit and receive data streams in different directions. Users are encouraged to update their
firmware through www.linksys.com when 802.11n specification is finalized by IEEE to ensure compatibility with
all the wireless-N devices.
Networks are useful tools for sharing computer resources. You can access one printer from different computers
and access data located on another computer's hard drive. Networks are even used for playing multiplayer video
games. So, networks are not only useful in homes and offices, they can also be fun.
PCs on a wired network create a LAN, or Local Area Network. They are connected with Ethernet cables, which is
why the network is called "wired".
PCs equipped with wireless client cards or adapters can communicate without cumbersome cables. By sharing
the same wireless settings within their transmission radius, they form a wireless network. This is sometimes
called a WLAN, or Wireless Local Area Network. The Access Point bridges wireless networks of 802.11n, 802.11g
and 802.11b standards and wired networks.
Use the instructions in this Guide to help you connect the Access Point, set it up, and configure it to bridge your
different networks. These instructions should be all you need to get the most out of the Access Point.
802.11b:
a wireless networking standard that specifies a
maximum data transfer rate of 11Mbps and an operating
frequency of 2.4GHz.
802.11g:
a wireless networking standard that specifies a
maximum data transfer rate of 54Mbps, an operating
frequency of 2.4GHz, and backward compatibility with
802.11b devices.
adapter:
a device that adds network functionality to your
PC.
ethernet:
network protocol defined in IEEE 802.3 standard
that specifies how data is placed on and retrieved from a
common transmission medium.
lan
(local area network): the computers and networking
devices that make up your local network.
network:
a series of computers or devices connected
together.
poe
(power over ethernet): a technology enabling an
Ethernet network cable to deliver both data and power.
access point
: a device that allows wireless-equipped
computers and other devices to communicate with each
other and with devices on a wired network. Also used to
expand the range of a wireless network.
802.11n:
wireless networking draft standard that specifies
a maximum data rate up to 600Mbps (300Mbps supported
by this device), an operating frequency of 2.4GHz, and
backward compatibility with 802.11b/g devices.
Page 8 / 69
2
Chapter 1: Introduction
What’s in this User Guide?
Wireless-N Access Point with Power Over Ethernet
What’s in this User Guide?
This user guide covers the steps for setting up and using the Wireless-N Access Point.
Chapter 1: Introduction
This chapter describes the Wireless-N Access Point’s applications and this User Guide.
Chapter 2: Planning your Wireless Network
This chapter describes the basics of wireless networking.
Chapter 3: Getting to Know the Wireless-N Access Point
This chapter describes the physical features of the Access Point.
Chapter 4: Connecting the Wireless-N Access Point
This chapter instructs you on how to connect your Access Point to your network and placement options.
Chapter 5: Setting up the Wireless-N Access Point
This chapter explains how to perform the most basic setting changes through the Web-based Utility.
Chapter 6: Configuring the Wireless-G Exterior Access Point
This chapter provides a reference for the available configuration through the Web-based Utility.
Appendix A: Troubleshooting
This appendix describes some frequently asked questions regarding installation and use of the Wireless-G
Exterior Access Point.
Appendix B: Wireless Security
This appendix explains the risks of wireless networking and some solutions to reduce the risks.
Appendix C: Upgrading Firmware
This appendix instructs you on how to upgrade the Access Point’s firmware.
Appendix D: Windows Help.
This appendix describes some of the ways Windows can help you with wireless networking.
Appendix E: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
Appendix F: Specifications
This appendix provides the Access Point’s technical specifications.
Page 9 / 69
3
Chapter 1: Introduction
What’s in this User Guide?
Wireless-N Access Point with Power Over Ethernet
Appendix G: Warranty Information
This appendix supplies the Access Point’s warranty information.
Appendix H: Regulatory Information
This appendix supplies the Access Point’s regulatory information.
Appendix I: Contact Information
This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Page 10 / 69
4
Chapter 2: Planning Your Wireless Network
Network Topology
Wireless-N Access Point with Power Over Ethernet
Chapter 2: Planning Your Wireless Network
Network Topology
A wireless network is a group of computers, each equipped with one or more wireless adapters.
Computers in a
wireless network must be configured to share the same radio channel to talk to each other. Several PCs equipped
with wireless cards or adapters can communicate with each other to form an ad-hoc network without the use of
an access point.
Linksys also provides products to allow wireless adaptors to access wired network through a bridge such as the
wireless access point, or wireless router.
An integrated wireless and wired network is called an infrastructure
network. Each wireless PC in an infrastructure network can talk to any computer in a wired or wireless network
via the access point or wireless router.
An infrastructure configuration extends the accessibility of a wireless PC to a wired network, and may double the
effective wireless transmission range for two wireless adapter PCs.
Since an Access Point is able to forward data
within a network, the effective transmission range in an infrastructure network may be more than doubled since
Access Point can transmit signal at higher power to the wireless space.
Roaming
Infrastructure mode also supports roaming capabilities for mobile users. Roaming means that you can move your
wireless PC within your network and the access points will pick up the wireless PC's signal, providing that they
both share the same wireless network (SSID) and wireless security settings.
This Access Point has 802.11F Inter-Access Point Protocol (IAPP) to complete the roaming process in seconds. If
your wireless networks share the same IP subnet, this will not disrupt your data connection while moving around.
Before you consider roaming, choose a feasible radio channel and optimum access point position. Proper access
point positioning combined with a clear radio signal will greatly enhance performance.
Network Layout
The Wireless-N Access Point has been designed for use with 802.11n, 802.11g and 802.11b products. The
Access Point is compatible with 802.11n, 802.11g and 802.11b adapters, such as the notebook adapters for your
laptop computers, PCI adapters for your desktop PCs, and USB adapters for all PCs when you want to enjoy
infrastructure
: a wireless network that is bridged to a wired
network via an access point.
ad-hoc
: a group of wireless devices communicating directly
with each other (peer-to-peer) without the use of an access
point.
roaming
: the ability to take a wireless device from one
access point's range to another without losing the
connection.
ssid
: your wireless network's name

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top