Page 41 / 86
Scroll up to view Page 36 - 40
Configuring the WAP2000 Access Point
Configuring Wireless Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
36
6
STEP
5
Provide the following information:
•
RADIUS Server IP Address
—Enter the RADIUS server’s IP address.
•
RADIUS Server Port
—Enter the port number used by the RADIUS server.
The default is
1812
.
•
Encryption
—Mixed Mode automatically chooses
TKIP
or
AES
for data
encryption.
•
Shared Secret
—Enter the shared secret key used by the access point and
RADIUS server.
•
Key Renewal Timeout
—Enter a key renewal timeout period, which instructs
the access point how often it should change the encryption keys. The default
is
3600
seconds.
STEP
6
Click
Save
.
Page 42 / 86
Configuring the WAP2000 Access Point
Configuring Wireless Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
37
6
Configuring RADIUS
This security mode is also known as Dynamic WEP with IEEE 802.1X. A RADIUS
server is used for client authentication and WEP is used for data encryption.
The WEP key is automatically generated by the RADIUS server.
NOTE
Manual WEP key is no longer supported to ensure compatibility with Microsoft’s
Windows implementation.
To configure the RADIUS wireless security settings for the access point, follow
these steps:
STEP 1
Click
Wireless > Security
.
STEP
2
From the Security Mode drop-down menu, select
RADIUS
.
STEP
3
To enable wireless isolation across SSIDs, select
Enabled
from the drop-down
menu. Otherwise, select
Disabled
.
STEP
4
To enable wireless isolation within SSID, select
Enabled
from the drop-down
menu. Otherwise, select
Disabled
.
Page 43 / 86
Configuring the WAP2000 Access Point
Configuring Wireless Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
38
6
STEP
5
Provide the following information:
•
RADIUS Server IP Address
—Enter the RADIUS server’s IP address.
•
RADIUS Server Port
—Enter the port number used by the RADIUS server.
The default is
1812
.
•
Shared Secret
—Enter the shared secret key used by the access point and
RADIUS server.
STEP
6
Click
Save
.
Page 44 / 86
Configuring the WAP2000 Access Point
Configuring Wireless Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
39
6
Configuring WEP
!
CAUTION
For improved security, migrate to WPA or WPA2. The Wired Equivalent Privacy
(WEP) security mode is not recommended any more, due to its weak security
protection. It was defined in the original IEEE 802.11 specification.
To configure the WEP wireless security settings for the access point, follow these
steps:
STEP 1
Click
Wireless > Security
.
STEP
2
From the Security Mode drop-down menu, select
WEP
.
Page 45 / 86
Configuring the WAP2000 Access Point
Configuring Wireless Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
40
6
STEP
3
To enable wireless isolation across SSIDs, select
Enabled
from the drop-down
menu. Otherwise, select
Disabled
.
STEP
4
To enable wireless isolation within SSID, select
Enabled
from the drop-down
menu. Otherwise, select
Disabled
.
STEP
5
Provide the following information:
•
Authentication Type
—Choose the 802.11 authentication type as either
Open System
or
Shared Key
. The default is
Open System
.
•
Default Transmit Key
—Select the key to be used for data encryption.
•
Encryption
—Select a level of WEP encryption, 64 bits (10 hex digits) or 128
bits (26 hex digits).
•
Passphrase
—If you want to generate WEP keys using a passphrase, then
enter the passphrase in the field provided and click
Generate
. The auto-
generated keys are not as strong as manual WEP keys.
•
Key 1–4
—If you want to manually enter WEP keys, then complete the fields
provided. Each WEP key can consist of the letters “A” through “F” and the
numbers “0” through “9”. A WEP key should be 10 characters long for 64-bit
encryption or 26 characters long for 128-bit encryption.
STEP
6
Click
Save
.
19216811.live