Linksys WAP200 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys WAP200 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 74
USER GUIDE
BUSINESS SERIES
Wireless-G Access Point
Model No. WAP200
with Power Over Ethernet
and Rangebooster
Page 2 / 74
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Copyright and Trademarks
Specifications are subject to change without notice. Linksys, Cisco and the Cisco Logo are registered trademarks
or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2008
Cisco Systems, Inc. All rights reserved.
How to Use this User Guide
The user guide to the Dual-Band Wireless Access Point has been designed to make understanding networking
with the Access Point easier than ever. Look for the following items when reading this User Guide:
In addition to these symbols, there are
definitions for technical terms that are presented like this:
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure numbers and descriptions can also be found in the “List of Figures” section.
This exclamation point means there is a caution or
warning and is something that could damage your
property or the Access Point.
word:
definition.
This checkmark means there is a note of interest and
is something you should pay special attention to while
using the Access Point.
This question mark provides you with a reminder about
something you might need to do while using the Access Point.
Figure 0-1: Sample Figure Description
WAP200-UG-8062710B-RC
WARNING:
This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm.
Wash hands after handling.
Page 3 / 74
Wireless-G Access Point with Power Over Ethernet and Rangebooster
Table of Contents
Chapter 1: Introduction
1
Welcome
1
What’s in this User Guide?
2
Chapter 2: Planning Your Wireless Network
4
Network Topology
4
Roaming
4
Network Layout
5
Example of a simple wireless network
6
Chapter 3: Getting to Know the Wireless-G Access Point
7
The LEDs
7
The Ports
8
Antennas and Positions
9
Chapter 4: Connecting the Wireless-G Access Point
10
Overview
10
Connection
10
Placement Options
11
Chapter 5: Setting Up the Wireless-G Access Point
12
Overview
12
Accessing the Utility
12
Navigating the Utility
13
Chapter 6: Configuring the Wireless-G Access Point
16
The Setup - Basic Setup Tab
16
The Setup - Time Tab
17
The Wireless - Basic Wireless Settings Tab
18
The Wireless - Wireless Security Tab
19
The Wireless - Wireless Connection Control Tab
24
The Wireless - Advanced Wireless Settings Tab
25
The Wireless - VLAN & QoS Tab
26
The AP Mode Tab
28
The Security Monitor - Basic Settings Tab
31
The Security Monitor - Event Log Tab
32
The Administration - Management Tab
34
Page 4 / 74
Wireless-G Access Point with Power Over Ethernet and Rangebooster
The Administration - Log Tab
36
The Administration - Factory Default Tab
37
The Administration - Firmware Upgrade Tab
37
The Administration - Reboot Tab
38
The Administration - Config Management Tab
38
The Status - Local Network Tab
39
The Status - Wireless Tab
40
The Status - System Performance Tab
41
Appendix A: Troubleshooting
43
Frequently Asked Questions
43
Appendix B: Wireless Security
47
Security Precautions
47
Security Threats Facing Wireless Networks
47
Appendix C: Upgrading Firmware
50
Appendix D: Windows Help
51
Appendix E: Glossary
52
Appendix F: Specifications
57
Appendix G: Warranty Information
60
Appendix H: Regulatory Information
61
Appendix I: Contact Information
68
Page 5 / 74
Wireless-G Access Point with Power Over Ethernet and Rangebooster
List of Figures
Figure 2-1: Example of a Simple Wireless Network
6
Figure 3-1: Front Panel
7
Figure 3-2: Back View
8
Figure 3-3: Desktop Placement and Antenna Setup
9
Figure 4-1: Connect the Ethernet Cable
10
Figure 4-2: Connect the Power
10
Figure 4-3: Stand
11
Figure 4-4: Mounting Dimensions
11
Figure 5-1: Login Screen
13
Figure 6-1: Setup - Basic Setup
16
Figure 6-2: Setup - Time
17
Figure 6-3: Wireless - Basic Wireless Settings
18
Figure 6-4: Wireless - Wireless Security (Disabled)
19
Figure 6-5: Wireless - Wireless Security (WEP)
19
Figure 6-6: Wireless - Wireless Security (WPA-Personal)
20
Figure 6-7: Wireless - Wireless Security (WPA2-Personal)
20
Figure 6-8: Wireless - Wireless Security (WPA2-Personal Mixed)
21
Figure 6-9: Wireless - Wireless Security (WPA-Enterprise)
21
Figure 6-10: Wireless - Wireless Security (WPA2-Enterprise)
22
Figure 6-11: Wireless - Wireless Security (WPA2 - Enterprise Mixed)
22
Figure 6-12: Wireless - Wireless Security (RADIUS)
23
Figure 6-13: Wireless - Wireless Connection Control
24
Figure 6-14: Select MAC Address from Wireless Client List
24
Figure 6-15: Wireless - Advanced Wireless
25
Figure 6-16: Wireless - VLAN & QoS
26
Figure 6-17: AP Mode
28
Figure 6-18: Wireless Repeater Mode
29
Figure 6-19: Wireless Bridge Mode
30

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top