1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WAG354G
    5. /
  5. 17
Page 81 / 366 Scroll up to view Page 76 - 80
75
Appendix F: Regulatory Information
Wireless-G ADSL Home Gateway
Appendix F: Regulatory Information
Compliance Information for 2.4-GHz Wireless Products Relevant to the EU and Other Countries
Following the EU Directive 1999/5/EC (R&TTE Directive)
Declaration of Conformity with Regard to the EU Directive 1995/5/EC (R&TTE Directive)
The following standards were applied during the assessment of the product against the
requirements of the Directive 1999/5/EC:
•
Radio: EN 300 328
•
EMC: EN 301 489-1, EN 301 489-17
•
Safety: EN 60950
CE Marking
For the Linksys Wireless-B and Wireless-G products, the following CE mark, notified body number
(where applicable), and class 2 identifier are added to the equipment.
Check the CE label on the product to find out which notified body was involved during the
assessment.
or
or
NOTE:
For all products, the Declaration of Conformity is available through one or more of
these options:
•
A pdf file is included on the product's CD.
•
A print copy is included with the product.
•
A pdf file is available on the product's webpage. Visit www.linksys.com/international
and select your country or region. Then select your product.
If you need any other technical documentation, see the “Technical Documents on
www.linksys.com/international” section, as shown later in this appendix.
Page 82 / 366
76
Appendix F: Regulatory Information
Wireless-G ADSL Home Gateway
National Restrictions
This product may be used in all EU countries (and other countries following the EU directive
1999/5/EC) without any limitation except for the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la
directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci-dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive
EU 1999/5/EC) senza nessuna limitazione, eccetto per i paesii menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen
Staaten die der EU Direktive 1995/5/CE folgen) mit Außnahme der folgenden aufgeführten
Staaten:
Belgium
The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any
outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for
more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden
bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens.
Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à
l’Institut Belge des services Postaux et des Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples
détails.
Page 83 / 366
77
Appendix F: Regulatory Information
Wireless-G ADSL Home Gateway
France
In case the product is used outdoors, the output power is restricted in some parts of the band. See Table 1 or check
http://www.art-telecom.fr/ for more details.
Dans la cas d’une utilisation en extérieur, la puissance de sortie est limitée pour certaines parties de la bande. Reportez-
vous à la table 1 ou visitez http://www.art-telecom.fr/ pour de plus amples détails.
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table
for Italy. Unless operating within the boundaries of the owner’s property, the use of this 2.4 GHz Wireless LAN product
requires a ‘general authorization’. Please check with http://www.comunicazioni.it/it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle
frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di prodotti Wireless LAN a 2.4 GHz richiede
una “Autorizzazione Generale”. Consultare http://www.comunicazioni.it/it/ per maggiori dettagli.
Product Usage Restrictions
This product is designed for indoor usage only. Outdoor usage is not recommended. Any modification or alteration to the
product shall void the warranty (see the Warranty Information appendix in this User Guide).
This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together
with the equipment. However, some applications may require the antenna(s) to be separated from the product and
installed remotely from the device by using extension cables. For these applications, Linksys offers an R-SMA extension
cable (AC9SMA) and an R-TNC extension cable (AC9TNC).
Both of these cables are 9 meters long and have a cable loss
(attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA
connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the
R-SMA or R-TNC extension cable.
Combinations of extension cables and antennas resulting in a radiated power level exceeding 100 mW EIRP are illegal.
Table 1: Applicable Power Levels in France
Location
Frequency Range (MHz)
Power (EIRP)
Indoor (No restrictions)
2400-2483.5
100 mW (20 dBm)
Outdoor
2400-2454
2454-2483.5
100 mW (20 dBm)
10 mW (10 dBm)
Page 84 / 366
78
Appendix F: Regulatory Information
Wireless-G ADSL Home Gateway
Power Output of Your Device
To comply with your country’s regulations, you may have to change the power output of your wireless device. Proceed to
the appropriate section for your device.
Wireless Adapters
Wireless adapters have the power output set to 100% by default. Maximum power output on each adapter does not exceed
20 dBm (100 mW); it is generally 18 dBm (64 mW) or below. If you need to alter your wireless adapter’s power output,
follow the appropriate instructions for your computer’s Windows operating system:
Windows XP
1.
Double-click the
Wireless
icon in your desktop’s system tray.
2.
Open the
Wireless Network Connection
window.
3.
Click the
Properties
button.
4.
Select the
General
tab, and click the
Configure
button.
5.
In the
Properties
window, click the
Advanced
tab.
6.
Select
Power Output
.
7.
From the pull-down menu on the right, select the wireless adapter’s power output percentage.
Windows 2000
1.
Open the
Control Panel
.
2.
Double-click
Network and Dial-Up Connections
.
3.
Select your current wireless connection, and select
Properties
.
4.
From the
Properties
screen, click the
Configure
button.
5.
Click the
Advanced
tab, and select
Power Output
.
6.
From the pull-down menu on the right, select the wireless adapter’s power setting.
If your computer is running Windows Millennium or 98, then refer to Windows Help for instructions on how to access the
advanced settings of a network adapter.
Wireless Access Points, Routers, or Other Wireless Products
If you have a wireless access point, router or other wireless product, use its Web-based Utility to configure its power
output setting (refer to the product’s documentation for more information).
Note:
The power output setting may not be available on all wireless products. For more information, refer to
the documentation on your product’s CD or http://www.linksys.com/international.
Page 85 / 366
79
Appendix F: Regulatory Information
Wireless-G ADSL Home Gateway
Technical Documents on www.linksys.com/international
Follow these steps to access technical documents:
1.
2.
Click the region in which you reside.
3.
Click the name of the country in which you reside.
4.
Click
Products
.
5.
Click the appropriate product category.
6.
Select a product.
7.
Click the type of documentation you want. The document will automatically open in PDF format.
Note:
If you have questions regarding the compliance of these products or you cannot find the information
you need, please contact your local sales office or visit http://www.linksys.com/international for more details.

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top