1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. SRW248G4
    5. /
  5. 13
Page 61 / 96 Scroll up to view Page 56 - 60
Chapter 5
Advanced Configuration
54
WebView Switches
Base Table
Management Station
Displays the management station
IP address for which the basic SNMP community is
defined.
Community String
Displays the password used to
authenticate the management station to the device.
Access
Mode
Displays
the
access
rights
of
the
community.
View Name
Displays the user-defined SNMP view.
Advanced Table
Management Station
Displays the management station
IP address for which the basic SNMP community is
defined.
Community String
Displays the password used to
authenticate the management station to the device.
Group Name
Displays advanced SNMP communities
group name.
SNMP > Notification Filter
The
Notification Filter
screen permits filtering traps based
on OIDs (Object Identifiers). Each OID is linked to a device
feature or a feature aspect. The
Notification Filter
screen
also allows network managers to filter notifications.
SNMP > Notification Filter
Filter Name
Contains a list of user-defined notification
filters.
New Object Identifier Subtree
Displays the OID for
which notifications are sent or blocked. If a filter is
attached to an OID, traps or informs are generated and
sent to the trap recipients. Object IDs are selected from
either the Select from List or the Object ID List. There are
two configuration options:
Select from List
Select the OID from the list provided.
Object ID
Enter an OID not offered in the Select from List
option.
Filter Type
Indicates whether informs or traps are sent
regarding the OID to the trap recipients.
Excluded
•
Restricts sending OID traps or informs.
Included
•
Sends OID traps or informs.
Use the
Add to List
button to add the Notification Filter
configuration to the Notification Filter Table at the bottom
of the screen.
Page 62 / 96
Chapter 5
Advanced Configuration
55
WebView Switches
SNMP > Notification Recipient
The
Notification Recipient
screen contains information for
defining filters that determine whether traps are sent to
specific users, and the trap type sent. SNMP notification
filters provide the following services:
Identifying Management Trap Targets
•
Trap Filtering
•
Selecting Trap Generation Parameters
•
Providing Access Control Checks
•
SNMP > Notification Recipient
Recipient IP
Indicates the IP address to whom the traps
are sent.
Notification Type
Defines the notification sent. The
possible field values are:
Traps
•
Indicates traps are sent.
Informs
•
Indicates informs are sent.
SNMPv1,2
Enables
SNMPv1,2
as
the
Notification
Recipient. Either SNMPv1,2 or SNMPv3 can be enabled at
any one time, but not both at the same time. If SNMPv1,2
is enabled, the Community String and Notification Version
fields are enabled for configuration:
Community String
•
Identifies the community string
of the trap manager.
Notification Version
•
Determines the trap type. The
possible field values are:
SNMP V1
•
Indicates SNMP Version 1 traps are sent.
SNMP V2
•
Indicates SNMP Version 2 traps are sent.
SNMPv3
Enables SNMPv3 as the Notification Recipient.
Either SNMPv1,2 or SNMPv3 can be enabled at any one
time, but not both at the same time. If SNMPv3is enabled,
the User Name and Security Level fields are enabled for
configuration:
User Name
Defines the user to whom SNMP notifications
are sent.
Security Level
Defines the means by which the packet is
authenticated. The possible field values are:
No
Authentication
•
The
packet
is
neither
authenticated nor encrypted.
Authentication
•
The packet is authenticated.
Privacy
•
Indicates the packet is both authenticated
and encrypted.
UDP Port
Displays the UDP port used to send notifications.
The default is
162
.
Filter Name
Indicates if the SNMP filter for which the
SNMP Notification filter is defined.
Timeout
Indicates the amount of time (seconds) the
device waits before resending informs. The default is
15
seconds.
Retries
Indicates the amount of times the device resends
an inform request. The default is
3
seconds.
Use the
Add to List
button to add the Notification
Recipient configuration to the relevant table at the bottom
of the screen.
Admin > User Authentication
You can modify user passwords in the
User Authentication
screen.
Admin > User Authentication
Authentication Type
Defines the user authentication
methods. Combinations of all the authentication methods
can be selected. The possible field values are:
Local
•
Authenticates the user at the device level.
The device checks the user name and password for
authentication.
RADIUS
•
Authenticates the user at the RADIUS server.
TACACS+
•
Authenticates the user at the TACACS+
server.
None
•
Assigns no authentication method to the
authentication profile.
Page 63 / 96
Chapter 5
Advanced Configuration
56
WebView Switches
User Name
Displays the user name.
Password
Specifies the new password. The password is
not displayed. As it entered an “*” corresponding to each
character is displayed in the field. The range is
1–159
characters.
Confirm Password
Confirms the new password. The
password entered into this field must be exactly the same
as the password entered in the Password field.
Use the
Add to List
button to add the user configuration
to the Local User’s Table.
Admin > Jumbo Frames
Admin > Jumbo Frames
Jumbo Frames
This option enables the transportation of
identical data in fewer frames. This ensures less overhead,
lower processing time and fewer interruptions.
NOTE:
The Jumbo Frames tab is not an available
option on the SRW224G4 and SRW248G4
Switches.
Admin > Static Address
A static address can be assigned to a specific interface on
this switch. Static addresses are bound to the assigned
interface and cannot be moved. When a static address is
seen on another interface, the address will be ignored and
will not be written to the address table.
Admin > Static Address
Interface
Displays the interface to which the entry
refers:
Port
•
The specific port number to which the forwarding
database parameters refer.
LAG
•
The specific LAG number to which the forwarding
database parameters refer.
MAC Address
Displays the MAC address to which the
entry refers.
VLAN ID
Displays the VLAN ID number to which the entry
refers.
VLAN Name
Displays the VLAN name to which the entry
refers.
Status
Displays how the entry was created. The possible
field values are:
Permanent
•
The MAC address is permanent.
Delete on Reset
•
The MAC address is deleted when
the device is reset.
Delete on Timeout
•
The MAC address is deleted when
a timeout occurs.
Secure
•
The MAC Address is defined for locked ports.
Query
Port
Specifies the interface for which the table is queried.
There are two interface types from which to select.
Port
•
The specific port number.
LAG
•
The specific LAG number.
Page 64 / 96
Chapter 5
Advanced Configuration
57
WebView Switches
MAC Address
Specifies the MAC address for which the
table is queried.
VLAN ID
Specifies the VLAN ID for which the table is
queried.
Address Table Sort Key
Specifies the means by which
the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin > Dynamic Address
The Dynamic Address Table contains the MAC addresses
learned by monitoring the source address for traffic
entering the switch. When the destination address for
inbound traffic is found in the database, the packets
intended for that address are forwarded directly to the
associated port. Otherwise, the traffic is flooded to all
ports.
Admin > Dynamic Address
The
Dynamic Address
screen contains parameters for
querying information in the Dynamic MAC Address Table,
including the interface type, MAC addresses, VLAN, and
table storing. The Dynamic MAC Address table contains
information about the aging time before a dynamic MAC
address is erased, and includes parameters for querying
and viewing the Dynamic MAC Address table. The Dynamic
MAC Address table contains address parameters by which
packets are directly forwarded to the ports. The Dynamic
Address Table can be sorted by interface, VLAN, and MAC
Address.
Address Aging
Specifies the amount of time (in seconds)
the MAC address remains in the Dynamic MAC Address
table before it times out, if no traffic from the source is
detected. The default value is
300
seconds.
Clear Table
If checked, clears the MAC address table.
Query
Port
Specifies the interface for which the table is queried.
There are two interface types from which to select.
Port
•
The specific port number.
LAG
•
The specific LAG number.
MAC Address
Specifies the MAC address for which the
table is queried.
VLAN ID
Specifies the VLAN ID for which the table is
queried.
Address Table Sort Key
Specifies the means by which
the Dynamic MAC Address Table is sorted. The address
table can be sorted by address, VLAN, or interface.
Admin > Logging
The System Logs enable viewing device events in real
time, and recording the events for later usage. System
Logs record and manage events and report errors or
informational messages.
Admin > Logging
Event messages have a unique format, as per the
SYSLOG protocols recommended message format for
all error reporting. For example, Syslog and local device
reporting messages are assigned a severity code, and
include a message mnemonic, which identifies the source
application generating the message. It allows messages
to be filtered based on their urgency or relevancy. Each
message severity determines the set of event logging
devices that are sent per each event logging.
Logging
Indicates if device global logs for Cache, File,
and Server Logs are enabled. Console logs are enabled by
default.
Emergency
•
The system is not functioning.
Alert
•
The system needs immediate attention.
Critical
•
The system is in a critical state.
Page 65 / 96
Chapter 5
Advanced Configuration
58
WebView Switches
Error
•
A system error has occurred.
Warning
•
A system warning has occurred.
Notice
•
The system is functioning properly, but system
notice has occurred.
Informational
•
Provides device information.
Debug
•
Provides
detailed
information
about
the
log. If a Debug error occurs, contact Customer Tech
Support.
Admin > Port Mirroring
Port mirroring monitors and mirrors network traffic by
forwarding copies of incoming and outgoing packets
from one port to a monitoring port. Port mirroring can be
used as diagnostic tool and/or a debugging feature. Port
mirroring also enables switch performance monitoring.
Admin > Port Mirroring
Network administrators configure port mirroring by
selecting a specific port to copy all packets, and different
ports from which the packets are copied.
Source Port
Defines the port to which traffic is mirrored.
Type
Indicates the port mode configuration for port
mirroring. The possible field values are:
RxOnly
•
Defines the port mirroring on receiving ports.
This is the default value.
TxOnly
•
Defines the port mirroring on transmitting
ports.
Both
•
Defines the port mirroring on both receiving
and transmitting ports.
Target Port
Defines the port from which traffic is
mirrored.
Admin > Cable Test
The
Cable Test
screen shows you results from performance
tests on copper cables. The maximum cable length that
can be tested is 120 meters. Cables are tested when the
ports are in the down state, except for the Approximate
Cable Length test.
Admin > Cable Test
Port
This is the port to which the cable is connected.
Test Result
This is the test result.
OK
indicates that the
cable passed the test.
No Cable
means there is no cable
connected to the port.
Open Cable
means the cable is
connected on only one side.
Short Cable
indicates that a
short has occurred in the cable.
Undefined
indicates that
the test could not be properly performed.
Cable Fault Distance
This is the distance from the port at
which the cable error occurred.
Last Update
This is the last time the port was tested.
Test
Click the
Test
button to perform the test.
Cable Length
This is the approximate length of the cable.
The Cable Length test can be performed only when the
port is up and operating at 1Gbps.

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top