Linksys SRW208L Router Manual PDF (Setup & Configuration Guide)

Page 16 / 86 Scroll up to view Page 11 - 15

10

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

Press the

Esc

button and you will return to the login

screen. Use the right arrow button to navigate to

Execute

and press the

Enter

button to enter the CLI interface.

Configuring the Switch through the

Console Interface

The console screens consist of a series of menus. Each

menu has several options, which are listed vertically. You

select a menu option when you highlight it; pressing the

Enter key activates the highlighted option.

To navigate through the menus and actions of the console

interface, use the up or down arrow keys to move up or

down, and use the left or right arrow keys to move left or

right. Use the Enter key to select a menu option, and use the

Esc key to return to the previous selection. Menu options

and any values entered or present will be highlighted. The

bottom of the screen lists the actions available.

Switch Main Menu

The

Main Menu

screen displays six menu choices: System

Configuration Menu, Port Status, Port Configuration, Help,

and Log Out.

Main Menu

System Configuration Menu

System Configuration Menu options:

System Information

1.

Management Settings

2.

User and Password Settings

3.

Security Settings

4.

IP Configuration

5.

File Management

6.

Restore System Default Settings

7.

Reboot System

8.

0.

Back to Main Menu.

System Information

From the

System Information

screen you can check current

firmware versions and other general switch information.

System Information

Page 17 / 86

11

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

Versions

The

Versions

screen displays the Boot Version, Software

Version, Loader Version and the Hardware Version.

Versions

Boot Version

This file runs when the Switch is turned on.

It performs power-on diagnostics and loads the operating

system for the Switch.

Software Version

This file contains the programming

code that runs the Switch.

Hardware Version

The current hardware setup of the

Switch.

General System Information

The

General System Information

screen displays the System

Description, System Up Time, System Mac Address, System

Contact, System Name and System Location.

Select Edit and press the

Enter

key to make changes. When

your changes are complete, press the

Esc

key to return to

the Action menu. Select

Save

and press the

Enter

key to

save your changes. To exit, select

Quit

and press the

Enter

key.

General Information

Management Settings

From the

Management Settings

screen, you can set Serial

Port Session Configuration, Telnet Session Configuration,

or Secure Telnet (SSH) Configuration.

Management Settings

Serial Port Configuration

On the

Serial Port Configuration

screen, the Switch’s baud

rate is displayed.

Select

Edit

and press the

Enter

key to make changes.

Toggle to the desired speed and when your changes are

complete, press the

Esc

key to return to the Action menu.

Select

Save

and press the

Enter

key to save your changes.

To exit, select

Quit

and press the

Enter

key.

Serial Port Configuration

Telnet Configuration

On the

Telnet Configuration

screen, the time-out is

displayed. The value is entered in seconds. If you do not

want the Telnet session to timeout, you may enter a value

of 0 sec.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

Page 18 / 86

12

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

Telnet Configuration

SSH Configuration

On the

SSH Configuration

screen, you can select SSH

Server Configuration, SSH Server Status, SSH Crypto Key

Generation, and SSH Keys Fingerprints.

SSH Configuation

SSH Server Configuration

On the

SSH Server Configuration

screen, the SSH Server can

be enabled or disabled by navigating to the SSH Server

option and using the SPACE bar to toggle the option. The

SSH Server Port can be modified by entering in the value.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the Esc key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

SSH Server Configuration

SSH Status

The

SSH Status

screen displays whether the SSH Server is

enabled, the RSA and DSA key status, and any open SSH

sessions.

Select Refresh to update the screen if necessary. To exit,

select

Quit

and press the

Enter

key.

SSH Status

SSH Crypto Key Generation

On the

SSH Crypto Key Generation

screen, the SSH Public

Key Algorithm can be toggled between RSA and DSA

using the SPACE bar to toggle the option. The SSH Public

Key Length cannot be modified.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

Page 19 / 86

13

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

SSH Crypto Key Generation

SSH Keys Fingerprints

On the

SSH Keys Fingerprints

screen, the RSA and DSA keys

will be displayed if they have been generated.

Select

Refresh

to update the screen if necessary. To exit,

select

Quit

and press the

Enter

key.

SSH Keys Fingerprints

User & Password Settings

From this screen, you can administer the user names and

passwords of those accessing the Switch.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

User & Password Settings

NOTE:

The

Username & Password Settings

screen

can also be used to set passwords for other

users.

Security Settings

The

Security Settings

screen enables you to configure

security settings on the Switch, as well as generate and

display the certificate.

Security Settings

SSL Certificate Generation

Use the

Certificate Generation

screen to specify a device-

generated certificate.

The following fields are specified:

Public Key Length

Specifies the SSL RSA key length.

(Range: 512 - 2048)

Organization Name

Specifies the organization name.

(Range: 1 - 64)

Locality or City Name

Specifies the location or city name.

(Range: 1 - 64)

State or Province Name

Specifies the state or province

name. (Range: 1 - 64)

Country Name

Specifies the country name. (Range:

2 - 2)

Validity Term

Specifies number of days certification is

valid. (Range: 30 - 3650)

Page 20 / 86

14

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

SSL Certificate Generation

Show Certificate

Use the

Show Certificate

screen to display the internal

certificate.

SSL Certificate

Disable Active Management Profile

Selecting this option will prompt you to confirm that you

want to disable the Active Management Profile.

IP Configuration

The

IP Configuration

screen displays these choices: the

Switch’s IP Address Settings, HTTP, HTTPS Configuration

and Network Configuration.

IP Configuration

IP Address Configuration

The

IP Address Settings

screen allows you to set the IP

information for the Switch.

IP Address Configuration

IP Address

The IP Address of the Switch is displayed. (The

default IP address is 192.168.1.254.) Verify that the address

you enter is correct and does not conflict with another

device on the network.

Subnet

Mask

The

subnet

mask

of

the

Switch

is

displayed.

Default Gateway

The IP address of your network’s

default gateway is displayed.

Management VLAN

The VLAN ID number is displayed.

DHCP client

The status of the DHCP client is displayed.

If you want the Switch to be a DHCP client, then select

ENABLE

. If you want to assign an static IP address to the

Switch, then enter the IP settings and select

DISABLE

.

Select

Edit

to make changes. When your changes are

complete, press the

Esc

key to return to the Action menu,

and select

Save

to save your changes.

HTTP

The

HTTP

screen displays the status and port number of

the HTTP Server.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share