Linksys SRW208 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 86 Scroll up to view Page 16 - 20

15

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

HTTP

HTTPS Configuration

Use the

HTTPS Configuration

screen to configure HTTPS

settings. You can enable or disable the HTTPS server and

configure the port on which the session is enabled.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

HTTPS

Nework Configuration

The

Network Configuration

screen offers a choice of two

tests, Ping and TraceRoute.

Network Configuration

Ping

The

Ping

screen displays the IP address of the location you

want to contact.

Select

Edit

to change the IP address, and select

Execute

to begin the ping test.

After the ping test is complete, the

Ping

screen displays

the IP address, status, and statistics of the ping test.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

Traceroute

The

TraceRoute

screen displays the IP address of the

address whose route you want to trace.

Select

Edit

to change the IP address, and select

Execute

to begin the traceroute test.

After the traceroute test is complete, the

TraceRoute

screen displays the IP address, status, and statistics of the

traceroute test.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

Page 22 / 86

16

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

File Management

The

File Management

screen allows you to upload or

download files, such as the startup configuration, boot, or

image file, using a TFTP server.

Select

Edit

to change the settings. When your changes

are complete, press the

Esc

key to return to the Action

menu, and select

Execute

to upload or download the

designated file. After you download a new image file, the

device should be rebooted.

If you are downloading a new boot image, please follow

these steps:

Download

the

new

boot

code.

DO

NOT

RESET

THE

1.

DEVICE.

Download the new software image.

2.

Reset the device now.

3.

NOTE:

When downloading a configuration file,

be sure that it is a valid configuration file. If

you have edited the file, ensure that only valid

entries have been configured.

Restore System Default Settings

To restore the Switch back to the factory default settings,

select

Restore System Default Settings

and press the

Enter

key. You will be asked if you want to continue. Press

the

y

key to restore the Switch’s default settings, or press

the

n

key to cancel.

Restore Default

Reboot System

Select

Reboot System

and press the

Enter

key if you

want to restart the Switch. You will be asked if you want to

continue. Press the

y

key to reboot the Switch, or press the

n

key to cancel. After the Switch has rebooted, the Switch

Main Menu screen will appear.

Reboot System

Back to Main Menu

Select

Back to Main Menu

if you want to return to the

main menu.

Port Status

On the

Switch Main Menu

screen, select

Port Status

and press the

Enter

key if you want to view the status

information for the Switch’s ports.

The

Port Status

screen displays the port numbers, their

status, Link status, speed and duplex mode, and status of

flow control, which is the flow of packet transmissions.

If you want to change any settings for a port, you must use

the

Port Configuration

screen.

Port Status

Port Configuration

On the

Switch Main Menu

screen, select

Port Configuration

and press the

Enter

key if you want to configure the

Switch’s ports.

Page 23 / 86

17

Configuration Using the Console Interface

8-Port 10/100 Ethernet Switch with Webview

Chapter 4

The

Port Configuration

screen displays the port numbers,

their status, auto-negotiation status, speed and duplex

mode, and status of flow control, which is the flow of

packet transmissions.

Select

Edit

and press the

Enter

key to make changes.

When your changes are complete, press the

Esc

key to

return to the Action menu. Select

Save

and press the

Enter

key to save your changes. To exit, select

Quit

and

press the

Enter

key.

Help

Select

Help

and press the

Enter

key if you want to view

the help information. This screen explains how to navigate

the various screens of the console interface.

Page 24 / 86

Chapter 5

Advanced Configuration

18

8-Port 10/100 Ethernet Switch with Webview

Chapter 5:

Advanced Configuration

Overview

This chapter describes the features included in the Web-

based Utility. All of the features shown in this chapter,

unless specifically identified, are included in the all of Fast

Ethernet switches. Additional features for specific switches

are noted.

Accessing the Web-based Utility

NOTE:

The web-based utility is optimized for

viewing with a screen resolution of 1024 x

768. Internet Explorer version 5.5 or above is

recommended.

Open your web browser and enter

192.168.1.254

into

the

Address

field. Press the Enter key and the login screen

will appear.

NOTE:

The default IP address of the device

is

192.168.1.254

. If you have modified this

address, enter the correct IP address. The

device should be on the same subnet as the

management station used to configure the

device. .

The first time you open the web-based utility, enter

admin

in the

User Name

field, and leave the

Password

field blank.

Click the

OK

button. You can set a password later from the

System Password

screen.

The first screen that appears is the

Setup Summary

screen.

Twelve main tabs are accessible from the web-based

utility: Setup, Port Management, VLAN Management,

Statistics, ACL, Security, QoS (Quality of Service), Spanning

Tree, Multicast, SNMP, Admin, and Logout. Click one of the

main tabs to view additional tabs.

Login Screen

NOTE:

The LEDs displayed in the web-based

utility are not the same as the LEDs on the front

panel of the Switch. The front panel LEDs display

different status information, which is described

in Chapter 2: Overview.

The LEDs on the

Setup Summary

screen display status

information about their corresponding ports. A green

LED indicates a connection, while a grey LED indicates no

connection. An orange LED indicates the port has been

closed down by the administrator. When you click a port’s

LED, the statistics for that port are displayed.

NOTE:

After configuring values using the

web-based utility, you may be required to refresh

the page to see the updated configuration.

Setup > Summary

The

Summary

screen

provides

device

and

system

information about the Switch.

Setup > Summary

Device Information

System Name

Displays the name for the Switch, if one

has been entered on the Setup > Network Settings tab.

IP Address

The IP address of the Switch is displayed here

(configurable from Setup > Network Settings tab).

Subnet Mask

The Subnet Mask of the Switch is displayed

here (configurable from Setup > Network Settings tab).

DNS Servers

The DNS Servers are displayed here

(configurable from Setup > Network Settings tab).

Default Gateway

The Default Gateway is displayed here

(configurable from Setup > Network Settings tab).

Page 25 / 86

Chapter 5

Advanced Configuration

19

8-Port 10/100 Ethernet Switch with Webview

Address Mode

Indicates whether the Switch is configured

with a Static or Dynamic IP address (configurable from

Setup - Network Settings tab).

Base MAC Address

This is the MAC address of the

Switch.

System Information

Serial Number

The serial number of the Switch is

displayed.

Model

Name

The

model

name

of

the

Switch

is

displayed.

Hardware version

The current hardware version is

displayed.

Boot Version

The current boot version is displayed.

Firmware

Version

The

current

software

version

is

displayed.

System Location

The system location is displayed here

(configurable from Setup > Network Settings tab).

System Contact

The contact person for this Switch

is displayed here (configurable from Setup > Network

Settings tab).

System Uptime

This displays the amount of time that

has elapsed since the Switch was last reset.

Current

Time

The

system

time

is

displayed

here

(configurable from Setup > Time tab).

PoE Information

Maximum Available Power

Indicates the maximum

amount of power the device can supply.

System Operation Status

Indicates whether the PoE

function is on or off.

Mainpower Consumption

Displays how much power is

currently used.

Setup > Network Settings

The

Network Settings

screen allows you to assign DHCP

or static IP settings to interfaces and assign default

gateways.

Identification

System Name

This field allows you to assign a system

name.

System Location

This field is used for entering a

description of where the Switch is located, such as 3rd

floor.

System Contact

Enter the administrative contact person

in this field.

System

Object

ID

The

system

object

identifier

is

displayed here.

Base MAC Address

This is the MAC address of the

Switch.

IP Configuration

Management VLAN

This drop-down allows you to select

the Management VLAN.

IP Address Mode

This drop-down allows you to select

Static or Dynamic IP address configuration.

Host Name

Enter the DHCP Host Name here.

IP Address

If using a static IP address, enter the IP address

here.

Subnet Mask

Enter the subnet mask of the currently

configured IP address.

Default Gateway

Enter the IP address of the Default

Gateway.

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share