Given below is full router user manual of Linksys SPA-3000 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 25
Sipura SPA-3000
Simplified Users Guide
Version 1.1e
A Step by Step Introduction
Written by Jason
from
JMG Technology
Page 2 / 25
Section 1 – Getting Started
When you receive your SPA-3000 it should contains the following items:
1. SPA-3000
2.
Power supply
3.
Phone cable
4.
Network cable
5.
Quickstart guide
Old Version (Sipura)
New Version (Linksys)
*** There is no difference between the Old Sipura SPA-3000 and the new Linksys SPA-3000
apart from the case. All firmware and internals are the same.
Setting up the hardware:
Step 1: Connect the power cable to your SPA-3000
Step 2: Connect the network cable from your SPA-3000 to your DHCP enabled modem/router
Step 3: Connect an analogue phone to the “Phone” port in the SPA-3000.
Step 4: Turn the power on
Step 5: Pick up the phone and dial ****
(
You should hear a voice saying Sipura Configuration Menu
)
Step 6: Dial 110# (
Write down the IP address that is returned
)
Step 7: Connect your PSTN line to the “Line” port of the SPA-3000.
At this stage, you can choose whether to upgrade the firmware. The latest version of the
SPA-3000 firmware at the time of writing this document is 3.1.10.
To upgrade the firmware see
Appendix D
.
Page 3 / 25
Section 2 – Configuring the SPA-3000 via the Web Interface
Once you have the IP address of your SPA-3000 you can access the web interface by
opening a web browser and typing the following in the Address
:
http://
<IP Address of SPA-3000>
For example:
You should now see the Sipura SPA-3000 Phone Adapter Configuration screen. Now you
will need to log into the unit as Administrator and change the view to advanced. See
images below.
Click on “
Admin Login
”
Click on “
advanced
”
Note
: You can also go directly to the admin/advanced section by typing
Page 4 / 25
Section 3 – Regional Settings
Click on the “
Regional
” tab.
The following changes are optional, however they will make your SPA-3000 sound more
Australian. Under the
Call Progress Tones
and
Distinctive Ring Patterns
headings change:
Dial tone
:
400@-19,425@-19,450@-19;10(*/0/1+2+3)
Busy Tone
:
425@-19;10(.375/.375/1)
Reorder Tone:
425@-19, 425@-29;60(.375/.375/1,.375/.375/2)
Ring Back Tone:
400@-19,425@-19,450@-19;*(.4/.2/1+2+3,.4/2/1+2+3)
MWI Dial Tone:
400@-19,425@-19,450@-19;2(.1/.1/1+2);10(*/0/1+2)
Ring1 Cadence
:
60(.4/.2,.4/2)
Page 5 / 25
The following changes are required under the
Miscellaneous
heading :
FXS Port Impedance
: 220+820||115nF
If you would like to configure the Time and Daylight savings, see
Appendix F
. This is
completely optional.
19216811.live