Linksys SPA-2002 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 9 Scroll up to view Page 1 - 5

Sipura SPA-2002 Configuration Guide

Page 3

****

None

Do not press any other keys

until you hear, “Configuration

menu.

Please enter option

followed by the pound (#)

key, or hang up to exit.”

100

None

The system announces if

DHCP is enabled or disabled.

101

Enter 1 to enable.

Enter 0 to disable.

Enter the option, followed by

the pound (#) key.

110

None

111

Enter value using the

numbers on the

telephone keypad.

Use

the star (*) key when

entering a decimal point.

Enter the value, followed by

the pound (#) key.

DHCP

must be “Disabled,”

otherwise you will hear the

announcement, “Invalid

Option” if you try to set this

value.

120

None

121

Enter value using the

numbers on the

telephone keypad.

Use

the star (*) key when

entering a decimal point.

Enter the value, followed by

the pound (#) key.

DHCP

must be “Disabled,”

otherwise you will hear the

announcement, “Invalid

Option” if you try to set this

value.

130

None

131

Enter the value using the

numbers on the

telephone keypad.

Use

the star (*) key when

entering a decimal point.

Enter the value, followed by

the pound (#) key.

DHCP

must be “Disabled,”

otherwise you will hear the

announcement, “Invalid

Option” if you try to set this

value.

140

None

You will hear the phone

adapter’s MAC address.

150

None

You will hear the phone

adapter’s firmware version.

7326668

None

After you hear, “Option

successful,” hang up the

phone. The phone adapter

will automatically reboot.

SPA-2002 Menu Options

Page 7 / 9

Sipura SPA-2002 Configuration Guide

Page 4

3.1 Configuration for Outbound Calling

To configure the SPA-2002 for outbound calling:

1.

Connect to the SPA-2002 by entering the device’s IP address in the Web

browser’s

Address

bar.

For instructions on obtaining the IP address, refer to

section

2.0

Accessing the SPA-2002

in Section 2.0 of this Guide.

2. Click on the

Admin Login

link in the upper right corner of the page, and then

click the

advanced

configuration link.

SPA-2002 Web Interface – Main Window

3. Click the

Line1

or

Line2

tab at the top of the page, and in the

NAT Settings

section, change the following setting:

NAT Keep Alive Enable

no

4. In the

Proxy and Registration

section (see the screen on the following page),

change the following settings:

Proxy

byod1.net2phone.com

Use Outbound Proxy

no

Use OB Proxy In Dialog

no

Make Call Without Reg

yes

Ans Call Without Reg

yes

DNS SRV Auto Prefix

no

5. In the

Subscriber Information

section (as shown in the Line1/2 Window screen on

the following page), enter a

Display Name

.

Enter the following values for

outbound only service:

Display Name (Line 1)

NO_DID1

OUTBOUND SERVICE ONLY

6. Enter the

User ID

(account) and

Password

(PIN).

Page 8 / 9

Sipura SPA-2002 Configuration Guide

Page 5

You must have a different account and PIN for Line 1 and Line 2.

7. Click the

Use Auth ID

drop-down menu, and click

no

.

NAT Settings and Network Settings and SIP Settings and Call Feature Settings

Sections

Page 9 / 9

Sipura SPA-2002 Configuration Guide

Page 6

Proxy and Registration Subscriber Information and Supplementary Service

Subscription Settings Sections

8. Scroll to the

Audio Configuration

section (as shown in the Audio Configurations

and Dial Plan Sections screen on the following page), and change the following

settings:

Preferred Codec

G729a

Use Pref Codec Only

no

G729a Enable

yes

G723 Enable

yes

G726-16 Enable

no

G726-24 Enable

no

G726-32 Enable

no

G726-40 Enable

no

DTMF Tx Method

AVT

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share