Linksys SPA-2002 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys SPA-2002 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 9
Sipura SPA-2002
Configuration Guide
OUTBOUND CALLING
Version 2.0
DocVersion: SPA-2002-IG-v1-0-052008
Page 2 / 9
All Rights Reserved
© Copyright 2008
The use, disclosure, modification, transfer, or transmittal of this work for any
purpose, in any form, or by any means, without the written permission of the
copyright holder, is strictly forbidden.
Trademarks used herein are the property of their respective owners.
Sipura SPA-2002 Installation Guide
Version 2.0
May 2008
Disclaimer
The content of this manual is subject to change without notice and should not be construed as
a commitment by the manufacturer, distributor, or service provider. This manual is furnished
for informational use only and the manufacturer, distributor, or service provider assumes no
responsibility for any errors or inaccuracies that may appear herein.
Any services provided through this equipment are not intended to replace or be a substitute
for primary line voice services or Plain Old Telephone Service (“POTS”) and are not meant to
provide guaranteed Automatic Number Identification or Automatic Location Information
capabilities associated with 911 or E911 services or to permit access to 411 directory
assistance services.
The manufacturer, distributor, or service provider will not be liable for
any damages, expenses, liabilities, risks, or harms arising out of or related to the services
provided through this equipment.
5.20.2008
Page 3 / 9
Sipura SPA-2002 Configuration Guide
Page i
1
Introduction
................................................................
1
2
Accessing the SPA-2002
..............................................
2
3.
Configuration
..............................................................
4
3.1
Configuration for Outbound Calling
..................................
4
Page 4 / 9
Sipura SPA-2002 Configuration Guide
Page 1
This document is a configuration guide for the Sipura SPA-2002.
Your SPA-2002 device
must have firmware version 3.1.20 configured on it in order to complete calls on the
network. Please obtain the latest firmware from
www.sipura.com
.
This guide provides
instructions for configuring of device settings for easy access to the calling network.
Page 5 / 9
Sipura SPA-2002 Configuration Guide
Page 2
To access the SPA-2002:
1.
Connect an analog phone to the Phone 1 port on the SPA-2002.
2.
Using the telephone keypad, press the star key (*) four (4) times:
****
.
You will be prompted to enter a code
.
3.
Enter 110# to obtain the IP address the SPA-2002 obtained via DHCP.
If you are
using a Static IP Address enter the appropriate code, followed by the pound (#)
key.
Refer to the
SPA2002 Menu Options
table on the following page for
codes.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top