Page 11 / 105 Scroll up to view Page 6 - 10
2
Chapter 1: Introduction
What’s in this Guide?
10/100 8-Port VPN Router
What’s in this Guide?
This user guide covers the steps for setting up and using the 10/100 8-Port VPN Router.
Chapter 1: Introduction
This chapter describes the 10/100 8-Port VPN Router and this User Guide.
Chapter 2: Networking Basics
This chapter describes the basics of networking.
Chapter 3: Getting to Know the 10/100 8-Port VPN Router
This chapter describes the physical features of the Router.
Chapter 4: Connecting the 10/100 8-Port VPN Router
This chapter instructs you on how to connect the Router to your network.
Chapter 5: Set Up and Configure the Router
This chapter explains how to use the Web-Based Utility to set up the Router and configure its settings.
Appendix A: Troubleshooting
This appendix describes some problems and solutions, as well as frequently asked questions, regarding
installation and use of the 10/100 8-Port VPN Router.
Appendix B: Installing the Linksys VPN Client
This appendix instructs you on how to install the Linksys QuickVPN Client for remote users.
Appendix C: Finding the MAC Address and IP Address for your Ethernet Adapter.
This appendix describes how to find the MAC address for your computer’s Ethernet adapter so you can use
the Router’s MAC address cloning feature.
Appendix D: Physical Setup of the Router
This appendix describes the physical setup of the Router, including the installation of the mounting brackets.
Appendix E: Battery Replacement
This appendix instructs you how to replace the Router’s battery.
Appendix F: Upgrading Firmware
This appendix instructs you on how to upgrade the Router’s firmware if you should need to do so.
Appendix G: Windows Help
This appendix describes how you can use Windows Help for instructions about networking, such as installing
the TCP/IP protocol.
Adapter:
a device that adds network functionality to your PC.
mac address:
the unique address that a
manufacturer assigns to each networking
Page 12 / 105
3
Chapter 1: Introduction
What’s in this Guide?
10/100 8-Port VPN Router
Appendix H: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
Appendix I: Specifications
This appendix provides the Router’s technical specifications.
Appendix J: Warranty Information
This appendix supplies the Router’s warranty information.
Appendix K: Regulatory Information
This appendix supplies the Router’s regulatory information.
Appendix L: Contact Information
This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Page 13 / 105
4
Chapter 2: Networking Basics
An Introduction to LANs
10/100 8-Port VPN Router
Chapter 2: Networking Basics
An Introduction to LANs
A Router is a network device that connects two networks together.
The Router connects your local area network (LAN), or the group of PCs in your home or office, to the Internet. The
Router processes and regulates the data that travels between these two networks.
The Router’s Network Address Translation (NAT) technology protects your network of PCs so users on the Internet
cannot “see” your PCs. This is how your LAN remains private. The Router protects your network by inspecting the
first packet coming in through the Internet port before delivery to the final destination on one of the Ethernet
ports. The Router inspects Internet port services like the web server, ftp server, or other Internet applications,
and, if allowed, it will forward the packet to the appropriate PC on the LAN side.
The Use of IP Addresses
IP stands for Internet Protocol. Every device in an IP-based network, including PCs, print servers, and routers,
requires an IP address to identify its location, or address, on the network. This applies to both the Internet and
LAN connections.
There are two ways of assigning IP addresses to your network devices.
A static IP address is a fixed IP address that you assign manually to a PC or other device on the network. Since a
static IP address remains valid until you disable it, static IP addressing ensures that the device assigned it will
always have that same IP address until you change it. Static IP addresses are commonly used with network
devices such as server PCs or print servers.
If you use the Router to share your cable or DSL Internet connection, contact your ISP to find out if they have
assigned a static IP address to your account. If so, you will need that static IP address when configuring the
Router. You can get the information from your ISP.
A dynamic IP address is automatically assigned to a device on the network. These IP addresses are called
dynamic because they are only temporarily assigned to the PC or other device. After a certain time period, they
expire and may change. If a PC logs onto the network (or the Internet) and its dynamic IP address has expired, the
DHCP server will assign it a new dynamic IP address.
Dynamic IP address
: a temporary IP
address assigned by a DHCP server.
Static IP address
: a fixed address
assigned to a computer or device that
is connected to a network.
NAT (Network Address Translation)
: NAT
technology translates IP addresses of a local area
network to a different IP address for the Internet.
DHCP (Dynamic Host Configuration Protocol)
: a
protocol that lets one device on a local network, known
as a DHCP server, assign temporary IP addresses to the
other network devices, typically computers.
DSL:
an always-on broadband
connection over traditional phone lines
FTP
: a standard protocol for sending files between
computers over a TCP/IP network and the Internet
ISP
: a company that provides access to the Internet
packet
: a unit of data sent over a network
Page 14 / 105
5
Chapter 2: Networking Basics
Why do I need a VPN?
10/100 8-Port VPN Router
A DHCP server can either be a designated PC on the network or another network device, such as the Router. By
default, the Router’s Internet Connection Type is
Obtain an IP automatically
(DHCP).
The PC or network device obtaining an IP address is called the DHCP client. DHCP frees you from having to assign
IP addresses manually every time a new user is added to your network.
For DSL users, many ISPs may require you to log on with a user name and password to gain access to the
Internet. This is a dedicated, high-speed connection type called Point to Point Protocol over Ethernet (PPPoE).
PPPoE is similar to a dial-up connection, but PPPoE does not dial a phone number when establishing a
connection. It also will provide the Router with a dynamic IP address to establish a connection to the Internet.
By default, a DHCP server (on the LAN side) is enabled on the Router. If you already have a DHCP server running
on your network, you MUST disable one of the two DHCP servers. If you run more than one DHCP server on your
network, you will experience network errors, such as conflicting IP addresses. To disable DHCP on the Router,
see the Basic Setup section in “Chapter 5: Setting up and Configuring the Router.”
Why do I need a VPN?
Computer networking provides a flexibility not available when using an archaic, paper-based system. With this
flexibility, however, comes an increased risk in security. This is why firewalls were first introduced. Firewalls
help to protect data inside of a local network. But what do you do once information is sent outside of your local
network, when e-mails are sent to their destination, or when you have to connect to your company's network
when you are out on the road? How is your data protected?
That is when a VPN can help. VPNs are called Virtual Private Networks because they secure data moving outside
of your network as if it were still within that network.
When data is sent out across the Internet from your computer, it is always open to attacks. You may already have
a firewall, which will help protect data moving around or held within your network from being corrupted or
intercepted by entities outside of your network, but once data moves outside of your network - when you send
data to someone via e-mail or communicate with an individual over the Internet - the firewall will no longer
protect that data.
At this point, your data becomes open to hackers using a variety of methods to steal not only the data you are
transmitting but also your network login and security data. Some of the most common methods are as follows:
1) MAC Address Spoofing
Packets transmitted over a network, either your local network or the Internet, are preceded by a packet header.
These packet headers contain both the source and destination information for that packet to transmit efficiently.
LAN
: the computers and networking products that
make up your local network
NOTE:
Since the Router is a device that connects two
networks, it needs two IP addresses—one for the
LAN, and one for the Internet.
In this User Guide, you’ll
see references to the “Internet IP address” and the
“LAN IP address.”
Since the Router uses NAT technology, the only IP
address that can be seen from the Internet for your
network is the Router’s Internet IP address. However,
even this Internet IP address can be blocked, so that
the Router and network seem invisible to the Internet.
Page 15 / 105
6
Chapter 2: Networking Basics
What is a VPN?
10/100 8-Port VPN Router
A hacker can use this information to spoof (or fake) a MAC address allowed on the network. With this spoofed
MAC address, the hacker can also intercept information meant for another user.
2) Data Sniffing
Data “sniffing” is a method used by hackers to obtain network data as it travels through unsecured networks,
such as the Internet. Tools for just this kind of activity, such as protocol analyzers and network diagnostic tools,
are often built into operating systems and allow the data to be viewed in clear text.
3) Man in the middle attacks
Once the hacker has either sniffed or spoofed enough information, he can now perform a “man in the middle”
attack. This attack is performed, when data is being transmitted from one network to another, by rerouting the
data to a new destination. Even though the data is not received by its intended recipient, it appears that way to
the person sending the data.
These are only a few of the methods hackers use and they are always developing more. Without the security of
your VPN, your data is constantly open to such attacks as it travels over the Internet. Data travelling over the
Internet will often pass through many different servers around the world before reaching its final destination.
That's a long way to go for unsecured data and this is when a VPN serves its purpose.
What is a VPN?
A VPN, or Virtual Private Network, is a connection between two endpoints - a VPN Router, for instance - in
different networks that allows private data to be sent securely over a shared or public network, such as the
Internet. This establishes a private network that can send data securely between these two locations or
networks.
This is done by creating a “tunnel”. A VPN tunnel connects the two PCs or networks and allows data to be
transmitted over the Internet as if it were still within those networks. Not a literal tunnel, it is a connection
secured by encrypting the data sent between the two networks.
VPN was created as a cost-effective alternative to using a private, dedicated, leased line for a private network.
Using industry standard encryption and authentication techniques - IPSec, short for IP Security - the VPN creates
a secure connection that, in effect, operates as if you were directly connected to your local network. Virtual
Private Networking can be used to create secure networks linking a central office with branch offices,
telecommuters, and/or professionals on the road (travelers can connect to a VPN Router using any computer with
VPN client software that supports IPSec, such as SSH Sentinel.)
There are two basic ways to create a VPN connection:
encryption
: encoding data to prevent it from being
read by unauthorized people
IPSec
: a VPN protocol used to implement
secure exchange of packets at the IP layer

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top