1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. RV082v1.1
    5. /
  5. 14
Page 66 / 105 Scroll up to view Page 61 - 65
57
Chapter 5: Setting Up and Configuring the Router
Log Tab - System Statistics
10/100 8-Port VPN Router
General Log
You can receive alert logs for any of these events when you check its box on the screen: System Error Messages,
Deny Policies, Allow Policies, Content Filtering, Data Inspection, Authorized Login, Configuration Changes.
View System Log
: Click this button to view all logs: System Log, Access Log, Firewall Log, or VPN Log.
Outgoing Log Table
: Click this button to view information about the outgoing logs: LAN IP, Destination URL/IP
and Service/Port number.
Incoming Log Table
: Click this button to view information about the incoming logs: Source IP and Destination
Port number.
Clear Log Now
: This button will clear out your log without e-mailing it. Clicking this button will delete all log
information.
Log Tab - System Statistics
This tab displays the system statistics including the Device Name, Status, IP Address, MAC Address, Subnet
Mask, Default Gateway, Received Packets, Sent Packets, Total Packets, Received Bytes, Sent Bytes, Total Bytes,
Error Packets Received, and Dropped Packets Received for LAN, WAN1 and WAN2.
Figure 5-59: Log tab - System Statistics
Figure 5-58: Log tab - View Log
Page 67 / 105
58
Chapter 5: Setting Up and Configuring the Router
Wizard Tab
10/100 8-Port VPN Router
Wizard Tab
Use this tab to access the Router’s two Setup Wizards: the Basic Setup Wizard and the Access Rule Setup Wizard.
They will help you to set up the Router to access the Internet and set up a Firewall security policy, or Access Rule.
Basic Setup
1.
Click the
Launch Now
button to run the Basic Setup Wizard to quickly set up the Router to access the
Internet.
2.
The first screen that appears requests whether the WAN2 (DMZ/Internet) port will be used as a WAN (Internet)
port or DMZ port. Select
Dual WAN
to use the port as a WAN port or select
DMZ
to use the port as a DMZ port.
Click
Next
to continue. Click
Exit
if you want to exit the wizard.
Figure 5-60: Wizard tab
Figure 5-61: Basic Setup Wizard -
Dual WAN or DMZ
Page 68 / 105
59
Chapter 5: Setting Up and Configuring the Router
Wizard Tab
10/100 8-Port VPN Router
3.
The information on the next screen is used if your Internet Service Provider (ISP) requires a host and domain
name. Complete this information, if required by your ISP, and click
Next
to continue. Click
Previous
if you
want to return to the previous screen. Click
Exit
if you want to exit the wizard.
4.
You will now need to set up the connection types for the WAN ports. These WAN Connection Types were
shown in Figures 6-6 through 6-11, and can be referred back to for help.
If you chose Obtain an IP automatically, select
Use DNS Server provided by ISP (default)
or
Use the
Following DNS Server Addresses
, if you want to enter a specific IP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
If you chose Static IP, enter the
Static IP
,
Subnet Mask
, and
Default Gateway
provided by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the
wizard.
If you chose PPPoE, enter the
User Name
and
Password
provided by your ISP. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the wizard.
5.
At the final screen, click
Save Settings
if you are satisfied with all of your settings. Click
Previous
if you
want to return to the previous screen. Click
Exit
if you want to exit the wizard.
Figure 5-63: Basic Setup Wizard -
Selecting WAN Connection Types
Figure 5-62: Basic Setup Wizard -
Host and Domain Name
Figure 5-64: Basic Setup Wizard - Save Settings
Page 69 / 105
60
Chapter 5: Setting Up and Configuring the Router
Wizard Tab
10/100 8-Port VPN Router
Access Rule Setup
You can access this Setup Wizard through the Wizard tab (shown in Figure 5-60) or by clicking the Wizard button
on the Add New Access Rule screen (shown in Figure 5-39).
1.
From the Wizard tab, click the
Launch Now
button to run the Access Rule Wizard to help you easily set up the
Firewall security policy for the Router.
2.
The first screen to appear explains the Access Rules. Click
Next
to continue. Click
Exit
if you want to exit the
wizard.
3.
From the next screen choose if you’d like to
Allow
or
Deny
the action you’ll be choosing for the rule. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the
wizard.
Figure 5-65: Access Rule Wizard -
What is Access Rules
Figure 5-66: Access Rule Wizard -
Select the Action
Page 70 / 105
61
Chapter 5: Setting Up and Configuring the Router
Wizard Tab
10/100 8-Port VPN Router
4.
Next select the service from the drop-down menu that will be allowed or denied from the Service menu. Click
Next
to continue. Click
Previous
if you want to return to the previous screen. Click
Exit
if you want to exit the
wizard.
5.
From the next screen, select the Source from the Ethernet drop-down menu. Then, select the users from the
drop-down menu, Any, single, or Range. Click
Next
to continue. Click
Previous
if you want to return to the
previous screen. Click
Exit
if you want to exit the wizard.
Figure 5-68: Access Rule Wizard -
Select the Source
Figure 5-67: Access Rule Wizard -
Select the Service

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top