Page 51 / 71 Scroll up to view Page 46 - 50
48
Linksys EA-Series
How to share folders and set access rights
You can select which folders to share. You can also select which users can
access the folders. For more information on managing access rights, see “How
to configure storage” on page 43.
To configure FTP and control folder access:
Storage > FTP Server
1.
In the
Storage
tab’s
FTP Server
page, click
Specify Folder
.
The
FTP Folder
screen opens in a separate window.
2.
In the
Display Name
field, enter a unique name for the FTP folder. The
name must use only alphanumeric characters (letters A to Z and numbers
0 to 9) and can be up to 15 characters long.
3.
To share the entire drive, click
Share Entire Partition
.
– OR -
To share only specific folders:
Click
Select
next to the folder you want to share.
To navigate to a previous folder, click
Return to Upper Folder
.
To view and select folders within a folder, click
Enter into Folder
next
to the folder name.
4.
To create a folder, enter a unique folder name into the
New Folder
box,
then click
Create
.
5.
To change group access, select a group in the
Available Groups
or
Groups
with Access
column, then click
>>
or
<<
to move the group to the other
column.
6.
To apply your changes and enable FTP access, click
Save Settings
.
7.
To apply your changes and create the shared folder for FTP access, click
Save Settings
. You are returned to the
FTP Server
page, where a summary
of shared folders is displayed.
8.
To modify shared folder settings:
To change a FTP folder’s name or group access, click
Edit
.
To delete an FTP folder, click
Delete
.
To see a detailed summary of FTP folders, click
Summary
. A separate
window opens and shows the folder’s
Display Name
,
Partition
,
Share
Folder
, and
Groups with Access
. Click
Close
to close the window.
Page 52 / 71
49
Linksys EA-Series
How to access files remotely
For
EA3500
EA4500
To access files remotely, you must first attach a USB drive to your router and set
up that storage for remote access. For instructions, see “How to configure your
router’s storage for remote access” on page 47. You can then access files from
anywhere on the Internet.
To access files remotely:
1.
Make sure that your router is configured to share files. For more
information, see “How to configure your router’s storage for remote
access” on page 47.
2.
Make sure that your router has user accounts set up, and that you have
taken note of the user name and password you will use to access the
router’s storage. If you have enabled Anonymous FTP (not recommended),
you will not need a user name and password. For more information, see
“How to configure storage” on page 43.
3.
Take note of the IP address of your router. To view your router’s IP address,
open the browser-based utility, click the
Status
tab, then click the
Router
page and take note of the numbers in the
Internet IP Address
field.
– OR –
If you have
DDNS
(Dynamic Domain Name Service), take note of the
domain name registered to your router. For more information, see “How
to find your network on the Internet” on page 25.
4.
At any remote location where you can access the Internet, you can:
Use FTP (File Transfer Protocol) client software to connect to your
router. You will need to enter your router’s IP address. If access to your
router requires a user name and password, you will also need to enter
those details. For more information on using the FTP client software,
see its documentation or help.
– OR –
Type the router’s IP address into a web browser’s Internet address
field, press
Enter
, then enter your user name and password.
FTP software and web browsers display FTP content in many ways,
but you can usually use these common actions to navigate through
FTP folders:
Click a folder name to open it.
Click a double period (..) or
Up to a higher level directory
to
open a parent folder.
Click or right-click a file to download or view it.
Drag a file from another window and drop it into the FTP window
to upload it. (To upload a file, your user account must have write
access.)
How to set up your router as a media
server
For
EA4500
What is a media server and how would I use it?
A media server lets you share
media content across your network. Your router can act as a media server if it
has a USB drive attached and if you have UPnP AV (Audio and Video)-enabled
or DLNA (Digital Living Network Alliance)-certified devices in your home.
Examples of UPnP AV-enabled devices include digital media players, gaming
consoles with a built-in media player, and digital picture frames.
For example, if you have a digital media adapter that sends content to your
entertainment system, and if your router’s set up as a media server, then the
digital media adapter can access your router’s attached USB drive.
You can specify which folders are used by the media server, add and delete
folders, and specify how often the folders are scanned for new content.
To configure your router as a media server:
Storage > Media Server
1.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 20).
2.
Click the
Storage
tab, then click the
Media Server
page.
3.
Click
Enabled
to enable the media server.
Page 53 / 71
50
Linksys EA-Series
4.
Enter a name for your media server in the
Media Server Name
box. The
name must use only alphanumeric characters (letters A to Z and numbers
0 to 9) and can be up to 15 characters long.
5.
Click
Specify Folder to Scan
. A new window opens.
6.
In the
Display Name
field, enter a unique name for the media folder.
The name must use only alphanumeric characters (letters A to Z and
numbers 0 to 9) and can be up to 15 characters long.
7.
To share the entire drive, click
Share Entire Partition
.
– OR -
To share only specific folders:
Click
Select
next to each folder you want to share.
To navigate to a previous folder, click
Return to Upper Folder
.
To view and select folders within a folder, click
Enter into Folder
next
to the folder name.
8.
To create a folder, enter a unique folder name into the
New Folder
box,
then click
Create
.
9.
To save your selections and create the media folder, click
Save Settings
.
A summary of shared folders is displayed
10.
To delete an individual media folder, click
Delete
.
NOTE
If you delete a media folder, you are not deleting the folder’s
contents. You are only removing it as a folder that the media server
will use.
11.
To manually scan all shared folders, click
Scan All
.
– OR -
To scan an individual folder, click
Scan
next to the folder.
12.
To schedule a scan of the media folder for new media content, select
Auto-scan every
, then select a time interval from the drop-down list.
Page 54 / 71
51
Linksys EA-Series
How to connect your UPnP device to the media server
After you set up your router’s media server, you need to connect an UPnP-
compatible device (such as an UPnP-compatible game console or digital media
player) to the network so that you can play the media server’s content.
To connect an UPnP device to your router’s media server:
1.
Connect your UPnP device to your home network with wired (Ethernet
cable) or wireless networking. If you are connecting wirelessly, you
need to know your network’s name and password. See your device’s
documentation for help.
2.
On your UPnP device, change the media source to the media server
name you specified on your router. (See “How to set up your router as a
media server” on page 49)
3.
See your UPnP device’s documentation for help with playing media on
the device.
Page 55 / 71
52
Port Forwarding and Port Triggering
Linksys EA-Series
52
How to set up port forwarding
For
ALL
Why would I use port forwarding? Port forwarding is a feature that forwards
inbound traffic from the Internet on a specific port or ports to a specific device
or port on your local network. You can set up port forwarding for:
A single port (see “How to set up port forwarding for a single port” below)
Multiple ports (see “How to set up port forwarding for multiple ports” on
page 53)
A range of ports (see “How to set up port forwarding for a range of ports”
on page 53)
How to set up port forwarding for a single port
Why would I use port forwarding for a single port?
Single port forwarding
is a feature that forwards inbound traffic from the Internet on a specific port to
a single device on your local network. An example of single port forwarding
would be to forward inbound web requests, typically on port 80, to a web
server.
To set up single port forwarding:
Applications & Gaming > Single Port Forwarding
1.
Follow your device’s instructions for configuring it with a static IP address
or use DHCP reservation to assign it a permanent address (see “How to
set up the DHCP server on your router” on page 24).
2.
Log into the browser-based utility (see “How to open the browser-based
utility” on page 20).
3.
Click the
Applications & Gaming
tab, then click the
Single Port
Forwarding
page.
4.
Select the type of application from the
Application Name
drop-down
list. One of the more common types to select is
HTTP
, but see your
device’s documentation for recommendations.
5.
In the
To IP Address
field, enter the last three digits of the IP address you
have reserved for the computer you want to forward Internet traffic to.
The rest of the IP address has already been completed for you.
6.
Select
Enabled
next to the
IP Address field
.
7.
Click
Save Changes
at the bottom of the screen.
TIP
For other devices not included in the Application Name drop-
down list, see the device’s documentation for port and protocol
information.
Port Forwarding and Port Triggering

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top