Page 36 / 59 Scroll up to view Page 31 - 35
36
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Administration > Factory Defaults
The
Factory Defaults
screen allows you to restore the
Router’s configuration to its factory default settings°
Administration > Factory Defaults
NOTE:
Do not restore the factory defaults unless
you are having difficulties with the Router and
have
exhausted
all
other
troubleshooting
measures° Once the Router is reset, you will have
to re-enter all of your configuration settings°
Factory Defaults
Restore All Settings
To reset the Router’s settings to the
defaults, click this option and then follow the on-screen
instructions° Any settings you have saved will be lost
when the default settings are restored°
Administration > Firmware Upgrade
The
Firmware Upgrade
screen allows you to upgrade the
Router
’s firmware° Do not upgrade the firmware unless
you are experiencing problems with the
Router
or the new
firmware has a feature you want to use°
Administration > Firmware Upgrade
NOTE:
The Router may lose the settings
you have customized° Before you upgrade
its firmware, write down all of your custom
settings° After you upgrade its firmware, you
will have to re-enter all of your configuration
settings°
Firmware Upgrade
Before
upgrading
the
firmware,
download
the
Router’s
firmware
upgrade
file
from
the
website,
www.linksys.com/support
°
Please select a file to upgrade the firmware
Click
Browse
and select the extracted firmware upgrade file°
Start to Upgrade
After you have selected the appropriate
file, click this option, and f
ollow the on-screen instructions°
WARNING:
Do not interrupt the upgrade
process° You should not turn off the power or
press the Reset button during the upgrade
process° Doing so may disable the Router°
Status > Router
The
Router
screen displays information about the Router
and its current settings°
Status > Router
Router Information
Firmware Version
The version number of the Router’s
current firmware is displayed°
Firmware Verification
The unique identifier of the
firmware is displayed°
Current Time
This time set on the Router is displayed°
Internet MAC Address
The Router’s MAC Address, as
seen by your ISP, is displayed°
Host Name
The Host Name of the Router is displayed (if it
was entered on the
Setup > Basic Setup
screen)°
Domain Name
The Domain Name of the Router is
displayed (if it was entered on the
Setup > Basic Setup
screen)°
Page 37 / 59
37
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Internet Connection
This section shows the current network information
stored in the Router° The information varies depending on
the Internet connection type selected on the
Setup > Basic
Setup
screen°
For a DHCP connection, select
IP Address Release
or
IP Address Renew
as appropriate to release or renew
a DHCP lease° For a PPPoE or similar connection, select
Connect
or
Disconnect
as appropriate to connect to or
disconnect from the Internet°
Click
Refresh
to update the on-screen information°
Status > Local Network
The
Local Network
screen displays information about the
local network°
Status > Local Network
Local Network
Local MAC Address
The MAC address of the Router’s
local, wired interface is displayed°
Router IP Address
The Router’s IP address, as it appears
on your local network, is displayed°
Subnet Mask
The Subnet Mask of the Router is displayed°
DHCP Server
DHCP Server
The status of the Router’s DHCP server
function is displayed°
Start IP Address
For the range of IP addresses that can
be used by devices on your local network, the starting IP
address is displayed°
End IP Address
For the range of IP addresses that can
be used by devices on your local network, the ending IP
address is displayed°
DHCP Clients Table
Click this option to view a list of
computers or other devices that are using the Router as
a DHCP server°
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router° The list can be sorted by Client Name, Interface,
IP Address, and MAC Address° To remove a DHCP client,
click
Delete
° To update the on-screen information,
click
Refresh
° To exit this screen and return to the
Local
Network
screen, click
Close
°
Status > Wireless Network
The
Wireless Network
screen displays information about
your wireless network°
Status > Wireless Network
Wireless Network
MAC Address
The MAC address of the Router’s local,
wireless interface is displayed°
Mode
The wireless mode used by the network is
displayed°
Network Name (SSID)
The name of the wireless network,
which is also called the SSID, is displayed°
Channel Width
The Channel Width setting (selected on
the
Wireless > Basic Wireless Settings
screen) is displayed°
Channel
The Channel setting selected on the
Basic
Wireless Settings
screen is displayed°
Security
The wireless security method used by the
Router is displayed°
SSID Broadcast
The status of the SSID Broadcast option
is displayed°
Page 38 / 59
Linksys E2000
Appendix A: Troubleshooting
38
Advanced Wireless-N Router
Appendix A: Troubleshooting
Your computer cannot connect to the Internet.
Follow these instructions until your computer can connect
to the Internet:
Make sure that the Router is powered on° The Power
LED should be lit and not flashing°
If the Power LED is flashing, then power off all of
your network devices, including the modem, Router,
and computers° Then power on each device in the
following order:
Cable or DSL modem
Router
Computer
Check the cable connections° The computer should
be connected to one of the ports numbered 1-4 on
the Router, and the modem must be connected to the
Internet port on the Router°
The modem does not have an Ethernet port.
The modem is a dial-up modem for traditional dial-up
service° To use the Router, you need a cable/DSL modem
and high-speed Internet connection°
You cannot use the DSL service to connect manually to
the Internet.
After you have installed the Router, it will automatically
connect to your Internet Service Provider (ISP), so you no
longer need to connect manually°
The DSL telephone line does not fit into the Router’s
Internet port.
The Router does not replace your modem° You still need
your DSL modem in order to use the Router° Connect the
telephone line to the DSL modem, and then insert the
setup CD into your computer° Click
Set up your Linksys
Router
and follow the on-screen instructions°
When you double-click the web browser, you are
prompted for a username and password. If you want to
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar
for other browsers):
1° Select
Tools
>
Internet Options
°
2° Click the
Connections
tab°
3° Select
Never dial a connection
°
4° Click
OK
°
The Router does not have a coaxial port for the cable
connection.
The Router does not replace your modem° You still need
your cable modem in order to use the Router° Connect
your cable connection to the cable modem, and then
insert the setup CD into your computer° Click
Set up your
Linksys Router
and follow the on-screen instructions°
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same
on both the computer and the Router° If you have enabled
wireless security, then make sure the same security
method and key are used by both the computer and the
Router°
You need to modify the settings on the Router.
Router settings can be modified using the Cisco Connect
software, refer to
How to Access Cisco Connect
,
page 15
°
To modify the advanced settings, go to
Advanced Settings
°
Refer to
Advanced Settings
,
page 15
°
You want to access the browser-based utility
from Cisco
Connect.
To enter the browser-based utility from Cisco Connect,
follow these steps:
1° Open Cisco Connect°
On the main menu, click
Router settings
°
3° Click
Advanced settings
°
4° Write down the username and password that are
displayed° (To help protect your password, you can
copy it to the Clipboard by clicking
Copy Password
°)
5° Click
OK
°
6° Your web browser automatically opens° Enter the
username and password, and then click
OK
° (If you
copied the password to the Clipboard in step 4, press
Ctrl-V
to paste it into the
Password
field°)
When you try to log into the browser-based utility, your
password does not work.
Your wireless security password also serves as the browser-
based utility’s login password° To see this password:
1° Open Cisco Connect°
On the main menu, click
Router settings
°
3° The
Password
is displayed on the left side of the screen°
WEB:
If your questions are not addressed here,
refer to our E2000 support section on the web,
www.linksys.com/support/E2000
Page 39 / 59
Linksys E2000
Appendix B: Specifications
39
Advanced Wireless-N Router
Appendix B: Specifications
Model Name
Linksys E2000
Description
Advanced Wireless-N Router
Model Number
E2000
Standards
802°11n, 802°11a, 802°11g,
802°11b, 802°3, 802°3u,
802°3ab
Ports
Power, Internet, and Ethernet
Buttons
Reset, Wi-Fi Protected Setup
LEDs
Ethernet (1-4), Wi-Fi Protected
Setup, Wireless, Internet,
Power
Cabling Type
CAT 5e
Number of Antennas 3
RF Pwr (EIRP) in dBm 17 dBm
Antenna Gain in dBi
Main Antenna*: 1°5 dBi
Third Antenna: 2°2 dBi
UPnP able/cert
Able
Security Features
WEP, WPA, WPA2
Security Key Bits
Up to 128-Bit Encryption
Environmental
Dimensions
7°95" x 6°3" x 1°34"
(202 x 160 x 34 mm)
Weight
10°58 oz (0°30 kg)
Power
12V
Certification
FCC, CE, IC-03, Wi-Fi
Operating Temp°
32 to 104ºF (0 to 40ºC)
Storage Temp°
-4 to 140ºF (–20 to 60ºC)
Operating Humidity
10 to 85% Noncondensing
Storage Humidity
5 to 90% Noncondensing
* The Router has two main antennas°
Specifications are subject to change without notice°
Page 40 / 59
Linksys E2000
Appendix C: Warranty Information
40
Advanced Wireless-N Router
Appendix C: Warranty Information
LIMITED WARRANTY
(U°S°A, Canada, Asia Pacific, Australia, New Zealand)
FOR CONSUMERS WHO ARE COVERED BY CONSUMER
PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY
OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF
RESIDENCE, THE BENEFITS CONFERRED BY THIS WARRANTY
ARE IN ADDITION TO ALL RIGHTS AND REMEDIES
CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND
REGULATIONS° THIS WARRANTY DOES NOT EXCLUDE,
LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING
OUT OF NONCONFORMITY WITH A SALES CONTRACT°
SOME COUNTRIES, STATES AND PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY
LAST, SO THE LIMITATIONS OR EXCLUSIONS DESCRIBED
BELOW MAY NOT APPLY TO YOU° THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS THAT VARY BY COUNTRY, STATE OR
PROVINCE° THIS LIMITED WARRANTY IS GOVERNED BY
AND CONSTRUED UNDER THE LAWS OF THE COUNTRY IN
WHICH THE PRODUCT PURCHASE TOOK PLACE°
This warranty is provided to you by Cisco Systems, Inc°
or its subsidiary instead of Cisco Systems, Inc° (“Cisco”)°
Cisco warrants the hardware in this Cisco product against
defects in materials and workmanship under normal
use for the Warranty Period, which begins on the date of
purchase by the original end-user purchaser and lasts for
the period specified below:
One (1) year for new product
Ninety (90) days for refurbished product
Your exclusive remedy and Cisco’s entire liability under
this limited warranty will be for Cisco, at its option, to
(a) repair the product with new or refurbished parts,
(b) replace the product with a reasonably available
equivalent new or refurbished Cisco product, or (c) refund
the actual purchase price of the product less any rebates
and discounts, or (d) pay the cost of repair of the product°
Any repaired or replacement products will be warranted
for the remainder of the original Warranty Period or thirty
(30) days, whichever is longer° All products and parts that
are replaced become the property of Cisco°
Cisco additionally warrants that any media on which the
software may be provided will be free from defects in
materials and workmanship under normal use for a period
of ninety (90) days from the date of original purchase°
Your exclusive remedy and Cisco’s entire liability under
this limited warranty will be for Cisco, at its option, to (a)
replace the software media, or (b) refund the purchase
price of the software media°
EXCLUSIONS AND LIMITATIONS
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Cisco, (c)
the product damage was caused by use with non-Cisco
products, (d) the product has not been installed, operated,
repaired, or maintained in accordance with instructions
supplied by Cisco, (e) the product has been subjected to
abnormal physical or electrical stress, misuse, negligence,
or accident, (f) the serial number on the Product has been
altered, defaced, or removed, or (g) the product is supplied
or licensed for beta, evaluation, testing or demonstration
purposes for which Cisco does not charge a purchase
price or license fee°
EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET
FORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, ALL SOFTWARE AND SERVICES
PROVIDED BY CISCO WITH THE PRODUCT, WHETHER
FACTORY LOADED ON THE PRODUCT OR CONTAINED ON
MEDIA ACCOMPANYING THE PRODUCT, IS PROVIDED “AS
IS” WITHOUT WARRANTY OF ANY KIND° Without limiting
the foregoing, Cisco does not warrant that the operation
of the product, software or services will be uninterrupted
or error free° Also, due to the continual development
of new techniques for intruding upon and attacking
networks, Cisco does not warrant that the product,
software or services, or any equipment, system or network
on which the product, software or services are used will
be free of vulnerability to intrusion or attack° The product
may include or be bundled with third party software or
service offerings° This limited warranty shall not apply to
such third party software or service offerings° This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require°
TO THE
EXTENT
NOT
PROHIBITED
BY
APPLICABLE
LAW,
ALL
IMPLIED
WARRANTIES
AND
CONDITIONS
OF
MERCHANTABILITY,
SATISFACTORY
QUALITY
OR
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE DURATION OF THE WARRANTY PERIOD° ALL OTHER
EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS
AND WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE
DISCLAIMED°
TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,
IN NO EVENT WILL CISCO BE LIABLE FOR ANY LOST DATA,
REVENUE OR PROFIT, LOSS OF THE ABILITY TO USE ANY
THIRD PARTY PRODUCTS, SOFTWARE OR SERVICES, OR
FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL
OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY
OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT
OF OR RELATED TO THE USE OF OR INABILITY TO USE
THE PRODUCT, SOFTWARE OR ANY SERVICES PROVIDED
IN RESPECT OF SUCH PRODUCT, SOFTWARE OR SERVICE,
EVEN IF CISCO HAS BEEN ADVISED OF THE POSSIBILITY

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top