Linksys E1000 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Linksys

E1000

Page 21 / 60 Scroll up to view Page 16 - 20

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Password

Enter the Password for your DDNS account°

Host Name

The DDNS URL assigned by the DDNS service

is displayed°

System

Select the DynDNS service you use:

Dynamic

Static

, or

Custom

° The default selection is

Dynamic

Mail Exchange (Optional)

Enter the address of your mail

exchange server, so emails to your DynDNS address go to

your mail server°

Backup MX

This option allows the Mail eXchange (MX)

server to be a backup° To disable this option, keep the

default,

Disabled

° To enable the option, select

Enabled

° If

you are not sure which setting to select, keep the default,

Disabled

Wildcard

This setting enables or disables wildcards

for your host° For example, if your DDNS address is

myplace.dyndns.org

and you enable wildcards, then

x.myplace.dyndns.org

will work as well (x is the wildcard)°

To disable wildcards, keep the default,

Disabled

° To

enable wildcards, select

Enabled

° If you are not sure

which setting to select, keep the default,

Disabled

Internet IP Address

The Router’s Internet IP address is

displayed here° Because it is dynamic, it will change°

Status

The status of the DDNS service connection is

displayed°

Update

To manually trigger an update, click

Update

Click

Save Settings

to apply your changes, or click

Cancel

Changes

to clear your changes°

TZO°com

Setup > DDNS > TZO

E-mail Address, TZO Key, and Domain Name

Enter the

settings of the account you set up with TZO°

Internet IP Address

The Router’s Internet IP address is

displayed here° Because it is dynamic, it will change°

Status

The status of the DDNS service connection is

displayed°

Update

To manually trigger an update, click

Update

Click

Save Settings

to apply your changes, or click

Cancel

Changes

to clear your changes°

Setup > MAC Address Clone

A Media Access Control (MAC) address is a 12-digit code

assigned to a unique piece of hardware for identification°

Some ISPs require you to register a MAC address in order

to access the Internet° If you have your computer’s MAC

address registered with your ISP and you do not wish

to re-register the MAC address, then you may assign

the registered MAC address to the Router with the MAC

Address Clone feature°

Setup > MAC Address Clone

MAC Address Clone

Enabled/Disabled

To have the MAC address cloned,

select

Enabled

MAC Address

Enter the MAC address registered with

your ISP here°

Clone My PC’s MAC

Click this button to clone the MAC

address of the computer you are using°

Click

Save Settings

to apply your changes, or click

Cancel

Changes

to clear your changes°

Page 22 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Setup > Advanced Routing

This screen is used to set up the Router’s advanced

functions° Operating Mode allows you to select the

type(s) of advanced functions you use° Dynamic Routing

automatically adjusts how packets travel on your network°

Static Routing sets up a fixed route to another network

destination°

Setup > Advanced Routing

Advanced Routing

NAT

Enabled/Disabled

If this Router is hosting your network’s

connection to the Internet, keep the default,

Enabled

° If

another router exists on your network, select

Disabled

When the NAT setting is disabled, dynamic routing will be

enabled°

Dynamic Routing (RIP)

Dynamic routing uses the Routing Information Protocol

(RIP)° This option enables the Router to automatically

adjust to physical changes in the network’s layout and

exchange routing tables with the other router(s)° The

Router determines the network packets’ route based on

the fewest number of hops between the source and the

destination°

Enabled/Disabled

When the NAT setting is enabled, the

Dynamic Routing option is automatically disabled° When

the NAT setting is disabled, this option is available° Select

Enabled

to use the Dynamic Routing option°

Static Routing

A static route is a pre-determined pathway that network

information must travel to reach a specific host or

network° Enter the information described below to set up

a new static route°

Route Entries

To set up a static route between the

Router and another network, select a number from the

drop-down list° Click

Delete This Entry

to delete a static

route°

Enter Route Name

Enter a name for the Route here,

using a maximum of 25 alphanumeric characters°

Destination LAN IP

The Destination LAN (Local Area

Network) IP is the address of the remote network or host

to which you want to assign a static route°

Subnet

Mask

The

Subnet

Mask

determines

which

portion of a Destination LAN IP address is the network

portion, and which portion is the host portion°

Gateway

This is the IP address of the gateway device that

allows for contact between the Router and the remote

network or host°

Interface

This interface tells you whether the Destination

IP address is on the

LAN & Wireless

(Ethernet and wireless

networks) or the

Internet (WAN)

° (WAN stands for Wide

Area Network°)

Click

Show Routing Table

to view the static routes you

have already set up°

Advanced Routing > Routing Table

Routing Table

For each route, the Destination LAN IP address, Subnet

Mask, Gateway, and Interface are displayed° Click

Refresh

to update the information° Click

to exit

this screen°

Click

Save Settings

to apply your changes, or click

Cancel

Changes

to clear your changes°

Wireless > Basic Wireless Settings

The basic settings for wireless networking are set on this

screen°

There are two ways to configure the Router’s wireless

network(s), manual and Wi-Fi Protected Setup°

Wi-Fi Protected Setup is a feature that makes it easy to set

up your wireless network° If you have client devices, such

as wireless adapters, that support Wi-Fi Protected Setup,

then you can use Wi-Fi Protected Setup°

Configuration

View

manually

configure

your

wireless networks, select

Manual

° Proceed to the

Manual 

Setup

section° To use Wi-Fi Protected Setup, select

Wi-Fi

Protected Setup

° Proceed to

Wi-Fi Protected Setup

page 20

Page 23 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Manual Setup

If you set the

Configuration  View 

Manual

, the

Basic 

Wireless Settings

screen displays the following fields°

Wireless > Basic Wireless Settings (Manual Setup)

Network Mode

From this drop-down menu, you can

select the wireless standards running on your network°

•

Mixed

you

have

Wireless-N,

Wireless-G,

and

Wireless-B devices in your network, keep the default,

Mixed

•

BG-Mixed

If you have only Wireless-G and Wireless-B

devices in your network, select

BG-Mixed

•

Wireless-N Only

If you have only Wireless-N devices,

select

Wireless-N Only

•

Wireless-G Only

If you have only Wireless-G devices,

select

Wireless-G Only

•

Wireless-B Only

If you have only Wireless-B devices,

select

Wireless-B Only

•

Disabled

If you do not have any wireless devices in

your network, select

Disabled

NOTE:

If you are not sure which mode to use,

keep the default,

Mixed

Network Name (SSID)

The Service Set Identifier (SSID)

is the network name shared by all devices in a wireless

network° It is case-sensitive and must not exceed

32 keyboard characters° The default is

Ciscoxxxxx

(xxxxx

are the last five digits of the Router’s serial number)° The

serial number is located on the left side of the product

label, which is on the bottom panel°

Channel Width

The default is

20 MHz Only

° For best

performance, select

Auto

to have the Router automatically

select the Channel Width (20 MHz or 40 MHz)°

Channel

Select the appropriate channel for your wireless

network° If you are not sure which channel to select, then

keep the default,

Auto

SSID Broadcast

When wireless clients survey the local

area for wireless networks to associate with, they will

detect the SSID broadcast by the Router° To broadcast the

Router’s SSID, keep the default,

Enabled

° If you do not

want to broadcast the Router’s SSID, then select

Disabled

Click

Save Settings

to apply your changes, or click

Cancel

Changes

to clear your changes°

Wi-Fi Protected Setup

There are three methods available° Use the method that

applies to the client device you are configuring°

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

NOTE:

Wi-Fi Protected Setup configures one

client device at a time° Repeat the instructions

for each client device that supports Wi-Fi

Protected Setup°

•

Wi-Fi Protected Setup Button

Use this method if

your client device has a Wi-Fi Protected Setup button°

a°

Click or press the

Wi-Fi Protected Setup

button on

the client device°

b° Click the

Wi-Fi Protected Setup

button on the

Router’s

Wi-Fi Protected Setup

screen°

The Wi-Fi Protected Setup LED flashes blue for two

minutes during the Wi-Fi Protected Setup process

and lights up blue when the Wi-Fi Protected Setup

process is successful°

The LED lights up amber if there is an error during

the Wi-Fi Protected Setup process° Make sure the

client device supports Wi-Fi Protected Setup° Wait

until the LED is off, and then try again°

The LED flashes when a Wi-Fi Protected Setup

session is active° The Router supports one session

at a time° Wait until the LED is continuously lit, or

off before starting the next Wi-Fi Protected Setup

session°

c°

After the client device has been configured,

click

on the

Router’s

Wi-Fi  Protected  Setup

screen° Then refer back to your client device or its

documentation for further instructions°

Page 24 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

•

Enter Client Device PIN on Router

Use this method

if your client device has a Wi-Fi Protected Setup PIN

(Personal Identification Number)°

a°

Enter the PIN from the client device in the

field on

the Router’s

Wi-Fi Protected Setup

screen°

b° Click the

button on the

Router’s

Wi-Fi 

Protected Setup

screen°

c°

After the client device has been configured,

click

on the Router’s

Wi-Fi  Protected  Setup

screen° Then refer back to your client device or its

documentation for further instructions°

•

Enter Router PIN on Client Device

Use this method

if your client device asks for the Router’s PIN°

a° On the client device, enter the PIN listed on the

Router’s

Wi-Fi  Protected  Setup

screen° (It is also

listed on the label on the bottom of the Router°)

b° After the client device has been configured,

click

on the Router’s

Wi-Fi  Protected  Setup

screen° Then refer back to your client device or its

documentation for further instructions°

The Network Name (SSID), Security, and Passphrase are

displayed at the bottom of the screen°

NOTE:

If you have client devices that do not

support Wi-Fi Protected Setup, note the wireless

settings, and then manually configure those

client devices°

Wireless > Wireless Security

The wireless security settings configure the security

of your wireless network(s)° The Router supports the

following wireless security options: WPA/WPA2 Mixed

Mode (default), WPA2 Personal, WPA Personal, WEP, and

RADIUS° (WPA stands for Wi-Fi Protected Access° WEP

stands for Wireless Equivalent Privacy° RADIUS stands for

Remote Authentication Dial-In User Service°)

The default option is

WPA/WPA2 mixed mode

, which

allows your devices to connect using the strongest

security option they support, WPA2 or WPA°

Personal Options

Security Option

Strength

WPA2 Personal

Strongest

WPA/WPA2 mixed mode (default)

WPA2: Strongest

WPA: Strong

WPA Personal

Strong

WEP

Basic

Office Option

RADIUS is the security option offered for networks that

use a RADIUS server for authentication°

Security Mode

Select the security method for your wireless network° If

you do not want to use wireless security, keep the default,

Disabled

WPA/WPA2 Mixed Mode

NOTE:

If you are using WPA/WPA2 mixed mode,

each device in your wireless network MUST use

the same WPA shared key, or else the network

will not function properly°

Wireless Security > WPA/WPA2 Mixed Mode

Passphrase

Enter a passphrase of 8-63 characters° The

default is

password

WPA2 Personal

NOTE:

If you are using WPA2 or WPA, each

device in your wireless network MUST use the

same WPA method and shared key, or else the

network will not function properly°

Wireless Security > WPA2 Personal

Passphrase

Enter a passphrase of 8-63 characters° The

default is

password

Page 25 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

WPA Personal

NOTE:

If you are using WPA2 or WPA, each

device in your wireless network MUST use the

same WPA method and shared key, or else the

network will not function properly°

Wireless Security > WPA Personal

Passphrase

Enter a passphrase of 8-63 characters° The

default is

password

WEP

WEP is a basic encryption method, which is not as secure

as WPA°

NOTE:

f you are using WEP encryption, each

device in your wireless network MUST use the

same WEP encryption method and encryption

key, or else your wireless network will not

function properly°

Wireless Security > WEP

Encryption

Select a level of WEP encryption,

40/64 bits

(10 hex digits)

104/128 bits (26 hex digits)

° The

default is

40/64 bits (10 hex digits)

Passphrase

Enter a Passphrase to automatically generate

WEP keys° Then click

Generate

Key 1

If you did not enter a Passphrase, enter the WEP

key manually°

RADIUS

This option features WEP used in coordination with a

RADIUS server° (This should only be used when a RADIUS

server is connected to the Router°)

NOTE:

f you are using WEP encryption, each

device in your wireless network MUST use the

same WEP encryption method and encryption

key, or else your wireless network will not

function properly°

RADIUS

RADIUS Server

Enter the IP address of the RADIUS server°

RADIUS Port

Enter the port number of the RADIUS

server° The default is

1812

Shared Secret

Enter the key shared between the Router

and the server°

Encryption

Select a level of WEP encryption,

40/64 bits

(10 hex digits)

104/128 bits (26 hex digits)

° The

default is

40/64 bits (10 hex digits)

Passphrase

Enter a Passphrase to automatically generate

WEP keys° Then click

Generate

Key 1

If you did not enter a Passphrase, enter the WEP

key manually°

Click

Save Settings

to apply your changes, or click

Cancel

Changes

to clear your changes°

Rate

Popular Linksys Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share