Page 21 / 35
Scroll up to view Page 16 - 20
20
5
L2TP
The L2TP window allows user to configure basic L2TP settings for the router.
6
Big Pond
The Big Pond window allows user to configure basic BigPond settings for the router.
( BigPond is an ISP in Australia)
Page 22 / 35
21
3.5
LAN
3.5.1
LAN Settings
Configure the gateway address of the router. To dynamically assign the IP address for clients' PCs,
enable the DHCP Server, set the lease time, and then specify the address range.
Valid IP addresses consist of four numbers, which are separated by periods. The first three fields are
the network portion ranging from 0 to 255, while the last field is the host portion ranging from 1 to
254.
IP address:
This is the router’s LAN port IP address (Your LAN clients' default gateway IP
address).
Subnet Mask:
Specify a Subnet Mask for your LAN segment.
The Gateway acts as DHCP Server:
Check to enable the DHCP server.
IP Pool Starting Address:
Enter the first IP address assigned by the DHCP server.
IP Pool Ending Address:
Enter the last IP address assigned by the DHCP server.
Lease Time:
Enter the amount of time that a client can use the assigned IP address.
DNS Proxy:
Check to enable the DNS Proxy.
3.5.2
DHCP Client List
The DHCP client list allows you to see which clients are connected to the router via IP address, host
name, and MAC address.
Page 23 / 35
22
DHCP Client List:
This page shows all DHCP clients (LAN PCs) currently connected to your
network. It displays the IP address and the MAC address and Remaining Time of each LAN client.
Use the Refresh button to get the lately updated situation.
3.5.3
IGMP Snooping
Allowing switched Ethernet to check and make correct forwarding decisions.
3.6
NAT
3.6.1
Virtual Server
If you configure the router for a virtual server, remote users access services such as Web or FTP at
your local site from internet the traffic can be automatically redirected to local servers configured
as the virtual server. In other words, depending on the requested service (TCP/UDP port
number), the router redirects the external service request to the appropriate server.
Page 24 / 35
23
Enabled:
Enable Virtual Server.
Private IP:
This is the LAN client/host IP address being used by the virtual server within your
local network.
Private Port:
This is the LAN client/host port number being used by the application on the
computer within your local network.
Public Port:
Enter the service (service/Internet application) port number that will be re-directed to
the virtual server on your local network.
Type:
Select the Internet
protocol type (TCP, UDP or both). If you are not sure, leave it to be the
default both protocols.
Comment:
The description of this setting.
3.6.2
Port Triggering
Some applications require multiple connections, such as Internet gaming, video conferencing,
Internet telephony and others. These applications cannot work when Network Address Translation
(NAT) is enabled. If you need to run applications that require multiple connections, specify the port
associated with an application in the "Trigger Port" out going port field, select the protocol type as
TCP or UDP, then enter the public ports incoming port associated with the trigger port to open them
for inbound traffic.
Page 25 / 35
24
3.6.3
Port Mapping
This function allows one or more public IP addresses to be shared by multiple internal users. Enter
the Public IP address you desire to share into the Global IP field. Enter a range of internal IP that
will share the global IP.
19216811.live