19
This option is primary to enable this product to work properly. The setting items and the web
appearance depend on the WAN type. Choose correct WAN type before you start.
1.
LAN IP Address
:
the local IP address of this device. The computers on your network must use the
LAN IP address of your product as their Default Gateway. You can change it if necessary.
2.
WAN Type
: WAN connection type of your ISP. You can click
Change
button to choose a correct
one from the following four options:
A.
Static IP Address: ISP assigns you a static IP address.
B.
Dynamic IP Address: Obtain an IP address from ISP automatically.
C.
Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)
D.
PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
E.
PPTP: Some ISPs require the use of PPTP to connect to their services.
4.4.1.1 Static IP Address
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting
provided by your ISP.
4.4.1.2 Dynamic IP Address
1.
Host Name: optional. Required by some ISPs, for example, @Home.
2.
Renew IP Forever: this feature enables this product to renew your IP address automatically when
the lease time is expiring-- even when the system is idle.
4.4.1.3 Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)
1
LAN IP Address is the IP address of this product. It must be the default gateway of your
computers.
2.
WAN Type is Dynamic IP Address. If the WAN type is not correct, change it!
3.
Host Name: optional. Required by some ISPs, e.g. @Home.
4.
Renew IP Forever: this feature enable this product renew IP address automatically when the
lease time is being expired even the system is in idle state.
4.4.1.4 PPP over Ethernet
1.
PPPoE Account and Password: the account and password your ISP assigned to you. For security,
this field appears blank. If you don't want to change the password, leave it empty.
2.
PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave
it blank.
3.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.
Set it to zero or enable Auto-reconnect to disable this feature.
19216811.live