1. Home
    2. /
  2. Manuals
    3. /
  3. LevelOne
    4. /
  4. WBR-3408
    5. /
  5. 13
Page 61 / 112 Scroll up to view Page 56 - 60
PC Configuration
61
Unlisted Wireless Network
2. Click the
Add
button. You will see a screen like the example below.
Add Wireless Network
3.
Configure this screen as follows:
Enter the correct SSID, as used on the Wireless Router. Remember the
SSID is case-sensitive, so be sure to match the case, not just the spelling.
Set
Network Authentication
and
Data Encryption
to match the Wireless
Router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 62 / 112
PC Configuration
62
If using data encryption (WEP or WPA-PSK), enter the key used on the
Wireless Router. See the preceding sections for details of WEP and WPA-
PSK.
Uncheck the options
The key is provided for me automatically
and
This is a
computer-to-computer (ad hoc) network
.
Click OK to save and exit.
4.
This wireless network will then be listed in
Preferred Networks
on the screen
below.
Preferred Networks
5.
Click OK to establish a connection to the Wireless Router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 63 / 112
63
Chapter 5
Operation and Status
This Chapter details the operation of the Wireless Router and the
status screens. For Details of operation in Bridge (Modem) mode,
see Chapter 8 - Modem Mode.
Operation - Router Mode
Once both the Wireless Router and the PCs are configured, operation is
automatic.
However, there are some situations where additional Internet configuration may be
required. Refer to
Chapter 6 - Advanced Features
for further details.
Status Screen
Use the
Status
link on the main menu to view this screen.
Status Screen
5
Downloaded from
www.Manualslib.com
manuals search engine
Page 64 / 112
Operation and Status
64
Data - Status Screen
Internet
Connection Method
Displays the current connection method, as set in the
Setup
Wizard
.
Connection Status
This indicates the current status of the Internet Connection
Active
- Connection exists
Idle
- No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
Failed
- The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
If there is an error, you can click the "Connection Details"
button to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
WAN MAC Address
It displays the MAC address for the WAN.
Connection Details
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
LAN
IP Address
The IP Address of the Wireless Router.
Network Mask
The Network Mask (Subnet Mask) for the IP Address
above.
DHCP Server
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
MAC Address
This shows the MAC Address for the Wireless Router, as
seen on the LAN interface.
PC Database
Click this button to access the PC Database feature.
Wireless
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the Wire-
less screen.
Wireless AP
This indicates whether or not the Wireless Access Point
feature is enabled.
SSID 1/2
It displays the name of the SSID 1/2.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
MAC Address
The MAC (physical) address of the Wireless Access Point.
Wireless Schedule
Indicates whether the Wireless On/Off Schedule is Enabled.
You can also use the button to Enable or Disable this fea-
ture.
Downloaded from
www.Manualslib.com
manuals search engine
Page 65 / 112
Operation and Status
65
System
Device Name
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
Firmware Version
The version of the current firmware installed.
Current Time
It displays the current time of the system.
Buttons
Connection Details
Click this button to open a sub-window and view a detailed
description of the current connection.
Refresh Screen
Update the data displayed on screen.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.7 / 5 based on 3 votes.

Popular LevelOne Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top