LB-Link BL-WR3000 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of LB-Link BL-WR3000 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 16
300Mbps Wireless N Router
Model:BL-WR3000
Quick Installation Guide
Page 2 / 16
1.Connecting
the
device
Note: Please use wired network connections only to configure the Router.
Connect the WAN port on your Router to the Modem's LAN port with an Ethernet cable.
（
If there is no Modem, please use the incoming cable directly into the router's WAN port
）
.
Connect your computer to the Port labeled 1~4 on the Router with an Ethernet cable.
Plug the provided power adapter into the power jack on the back of the router and the
other end to a standard electrical wall socket.
Wireless N Router
Cable/DSL
Modem
Internet
1
2
3
Wireless N Router
Cable/DSL
Modem
Internet
PC
Wireless N Router
Cable/DSL
Modem
Internet
PC
1
2
3
Power
outlet
1
Page 3 / 16
Check the router's LED
indicator lights display status is the same as described.
Note: If the LED indicator light display abnormal, please check whether the
connection is correct.
4
WAN:Flashing or solid light
LAN:Flashing or solid light if the corresponding port is connected
SYS Flashing
:
Power: Solid light
WPS: Flashing
WLAN: Flashing
~
2
Page 4 / 16
2.Configuring
the
device
Note: First of all, please configure your computer's IP address to automatically
obtain, if not clear, please refer to FAQ3.
Login
Open your web browser,input
192.168.16.1
in the address
field and press
Enter
.
A dialog box will prompt you for
the User name and Password.
Enter the default values and click
OK.
User name:
admin
Password:
admin
The web management page will
display after a successful login
Click
OK
1
about:blank - Microsoft Internet Explorer
Address
192.168.16.1
Go
about:blank - Microsoft Internet Explorer
Network
Wireless
Firewall
Virtual Server
QOS
Quick Setup
Status
Time Zone
Export/import
Restore
Firmware
Password
System information
Run time
System time
Software version
00:30:01
07:32:24
v2.0.10.
Click
Quick Setup
3
Page 5 / 16
2
Internet Paremeters Configuration
This page will then display
How to select a connection type?
User name and password
A static IP address, subnet mask,
gateway and DNS server Static IP address
The Internet parameters provided by ISP
when users apply for Internet access
No parameters, don't use any router
and don't do any setting
1.Make sure the cable is securely plugged
2.If the connection type your ISP provided is
PPTP,L2TP,you must go to “
Network-WAN
”
into
Configuration for Dynamic
When you choose the Dynamic IP no change required. Click “Next” to go on the next setting.
19216811.live