19216811.liveWireless ADSL Router
USER MANUAL
23
instead of WEP.
WPA (PSK)
—
This is WPA encryption combined with a
pre-shared key (PSK)
,
which is a text string known only to the gateway and authorized wireless
clients. The gateway rejects the login if the client's PSK does not match.
WPA2
—
WPA2 is a more advanced encryption method than WPA. Because it
is a more recent standard, some of user’s wireless devices might not be able
to use it.
WPA2 (PSK)
—
This option uses WPA2 with a pre-shared key.
WPA2 and WPA
—
This option supports WPA2/WPA encryption for devices
capable of one or the other standard. The gateway automatically detects
whether a particular device can use WPA2 or WPA.
WPA2 AND WPA (PSK)
—
This has WPA2 or WPA encryption based on client
abilities, as well as a pre-shared key.
After making changes, click
Apply
to save.
5.4 Management
5.4.1 Remote Access
When the firewall is enabled on a WAN or LAN interface, all incoming IP traffic is
BLOCKED. However, some IP traffic can be
ACCEPTED
by setting up filters.
1. Select Advanced Setup=>Security=>IP Filtering=>Incoming and Choose Add or
Remove to configure incoming IP filters.
2.Click Add to add rules. If you want to do remote ping test, please select protocol as
ICMP; If you want to do Http or Telnet test, please select protocol as TCP/UDP. If
you want only Http remote access, you can set destination port as 80; If you want
only Telnet remote access, you can set destination port as 23; If you want
both, you
can set destination port as blank.