Page 41 / 43
Scroll up to view Page 36 - 40
4.9.1 To change the port function
35
To view the current port configuration settings, click the
Port Configuration
option. The following page
opens.
Figure 4-40: Port Configuration
4.9.1
To change the port function
Depending on device type connected to the port, you can change the port function.
1.
To change the port function, click
Change...
. The following page opens.
Figure 4-41: Port Configuration - Setup
2.
Select one of the available options:
±
data
- computer connected to this port
±
video
- Set Top Box connected to this port
±
voice
- VoIP phone connected to this port
±
nothing
- select this if you do not want to use this port
3.
Click
Next
to continue. The following page opens.
Page 42 / 43
C. User Guide
36
Figure 4-42: Port Configuration - Confirm
4.
Examine the settings and if appropriate, click
Confirm Changes.
4.10
Administration Password
1.
To change the administration password, select
System
>
Admin Password
. The following page
opens
Figure 4-43: Administration Password
2.
Type in the new password twice - in the New password field and in the Confirm new password field.
The password can be any combination of letters and numbers of up to 20 characters.
3.
To confirm new settings, click
Apply
.
4.11
Remote Access
Management Stations allow a specific host (or range of hosts) remote access to your home gateway
device without having to go through NAT and/or Firewall. This function is intended for expert users
(helpdesk, your ISP administrators,...) in order to connect to your device and configure it remotely.
To configure remote access:
1.
Select
System
>
Remote Access
. The following page opens.
Page 43 / 43
4.12 Status
37
Figure 4-44: Remote Access
2.
Select the
Web Browser
option.
3.
In the fields Start IP Address and End IP Address, type the host IP address or address range.
4.
If necessary, change the port number (
Web Server Port on Wan Interface
field) - the default port is
port 80.
5.
Click
Apply
.
4.12
Status
The status pages allow you to observe the following:
±
Internet Connection
±
Wireless Connection
(list of connected wireless PCs)
±
Traffic Statistics
±
DHCP Table
±
ARP Table
Select a corresponding link to observe these statuses.