Page 6 / 20
Scroll up to view Page 1 - 5
CP V51 R2 NZ August 2014
6 |
P a g e
5.
The following screen will open up, you may name this connection as you like, (such as
ADSL2+ internet connection), or use the default name “pppoa_0_0_100”.
click the ‘
Next
’
button to continue.
6.
The following screen will open, and you are required to type in your username and
password provided by your Internet Provider. If you don’t know your internet Credentials
then you will need to contact your Internet Provider. Scroll down and Check
the “
Enable
IGMP Multicast Proxy” and if IPv6 is enabled
,
also check “Enable MLD Multicast Proxy”
under
Multicast Proxy settings.
Page 7 / 20
CP V51 R2 NZ August 2014
7 |
P a g e
NOTE
: If IPV6 is not Enabled
“
Enable MLD Multicast Proxy
”
won’t
be an option.
7.
Once complete cli
ck on the ‘
next
’ button at the bottom of the screen to continue.
8.
Now you are presented with the following screen, make sure the ADSL2+ interface we
setup is in the left column before clicking on the ‘
next
’ button.
9.
Again make sure the ADSL2+ interface we created is in the left column before clicking the
‘
next’
button at the bottom of the page.
Page 8 / 20
CP V51 R2 NZ August 2014
8 |
P a g e
10.
Please review configuration and select
Apply/Save
to complete the ADSL2+ setup.
Once complete you will return to the main
‘Wan Service’
webpage were you can confirm
service setup.
Your ASDL2+ service is now configured; wait a few seconds and try opening a new webpage
in your browser to confirm your connection is active. The LED on the front of the device
labelled Internet, will light up green to indicate you have a connection to the internet.
Page 9 / 20
CP V51 R2 NZ August 2014
9 |
P a g e
VDSL2+ Setup
1.
I
n the left side menu, click on the ‘
Advance Setup’ tab and then click on the submenu
‘Wan Service’ to open up the configuration window.
Then click the ‘Add’ button on the
opened window to start activation of the VDSL interface.
2.
From the main display screen click on add and select “
ptm (0_1_1)”
from the drop down
menu.
Click ‘
Next
’ to continue to the next screen.
3.
Select the PPP over Ethernet (PPPOE) option.
(Optional) If you want you can customise your VDSL interface Name in the next field called
‘Enter service description’
For Chorus VDSL2 Service enter
Priority: 802.11P = 0
VLAN: 802.1Q = 10
Click ‘
Next
’ to continue to the next screen
.
Page 10 / 20
CP V51 R2 NZ August 2014
10 |
P a g e
4.
In the following section you will need to type in your Internet Service Provider credentials
to activate you Internet connection.
(The username and password provided to you when you signed up to the service). Scroll
down and Check
the “
Enable
IGMP Multicast Proxy” and if IPv6 is enabled
,
also check “Enable MLD
Multicast Proxy”
under Multicast Proxy settings.
NOTE
: If IPV6 is not Enabled “Enable MLD Multicast Proxy” won’t be an option.
19216811.live