Page 21 / 70
Scroll up to view Page 16 - 20
150M Wireless-N Broadband Router
(iB-WRB150N)
20
●
Connection Type
: Displays current Internet connection type.
●
User Name
: Enter the user name provided by your ISP.
●
Password
: Enter the password provided by your ISP.
●
MTU
: Maximum Transmission Unit. DO NOT change it from the factory
default of 1492 unless necessary. You may need to change it for optimal
performance with some specific websites or application software that
cannot be opened or enabled; in this case, try 1450, 1400, etc.
●
Service Name
: Description of PPPoE connection. Leave blank unless
necessary.
●
AC Name
: Description of server. Leave blank unless necessary.
●
Connect Automatically
: Connects automatically to the Internet upon
device startup or disconnection from the Internet.
●
Connect Manually
: Users need to connect the device to Internet
manually upon disconnection from the Internet.
●
Connect on Demand
: Connects to Internet automatically upon traffic
present.
●
Connect on Fixed Time
: Connects to Internet automatically within the
specified time length.
Note:
To activate the “Connect on Fixed Time" feature, you must first configure current
time on the "Time Settings” screen under "System
Tools" menu.
Page 22 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
21
4.2.2 Static IP
If your ISP offer you static IP Internet connection type, select “Static
IP" from Mode drop-down menu and then enter IP address, subnet mask,
Primary DNS and secondary DNS information provided by your ISP into
corresponding fields.
●
Connection Type
: Displays the current Internet connection type.
●
IP Address
: Enter the WAN IP address provided by your ISP. Inquire
your ISP if you are not clear.
●
Subnet Mask
: Enter WAN Subnet Mask provided by your ISP. The
default is 255.255.255.0.
●
Default Gateway
: Enter the WAN Gateway provided by your ISP.
●
Primary DNS
: Enter the necessary DNS address provided by your ISP.
●
Secondary DNS
: Enter the secondary DNS address if your ISP
provides, and it is optional.
●
MTU
: Maximum Transmission Unit. DO NOT change it from the factory
default of 1500 unless necessary. You may need to change it for optimal
performance with some specific websites or application software that
cannot be opened or enabled.
4.2.3 Dynamic IP
Select this option if your ISP does not give you any IP information or
account information. You don’t need to configure any settings for this
connection.
Page 23 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
22
●
MTU
: Maximum Transmission Unit. DO NOT change it from the factory
default of 1500 unless necessary. You may need to change it for optimal
performance with some specific websites or application software that
cannot be opened or enabled.
4.2.4 PPTP
:
●
Connection Type
: Displays the current Internet connection type.
●
PPTP Server address
: Enter the IP address of a PPTP server.
●
Username/Password
: Enter Username/Password given by the PPTP
server.
●
MTU
: Maximum Transmission Unit. DO NOT change factory default
value unless necessary. However you may need to change it for optimal
performance with some specific websites or application software that
cannot be opened or enabled; in this case, try 1450, 1400, etc.
Page 24 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
23
●
Address mode
: Select “Dynamic” if you don’t
get any IP information
from the PPTP server, otherwise select “Static”.
●
IP address
: Enter the IP address information provided by your ISP
(PPTP server). Inquire your local ISP if you are not clear (Static IP address
mode only).
●
Subnet mask
: Enter the subnet mask provided by your ISP, normally,
255.255.255.0 (Static IP address mode only).
●
Gateway
: Enter the gateway provided by your ISP (Static IP address
mode only). Inquire your local ISP if you are not clear.
4.2.5 L2TP
●
Connection Type
: Displays the current Internet connection type.
●
L2TP Server address
: Enter the IP address of a L2TP server.
●
Username/Password
: Enter Username/Password specified by the
PPTP server.
●
Address mode
: Enter the IP address information provided by your ISP
(PPTP server). Inquire your local ISP if you are not clear (Static IP address
mode only).
●
IP address
: Enter the IP address information provided by your ISP
(PPTP server). Inquire your local ISP if you are not clear (Static IP address
mode only).
Page 25 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
24
●
Subnet mask
: Enter the subnet mask provided by your ISP, normally,
255.255.255.0 (Static IP address mode only).
●
Gateway
: Enter the gateway provided by your ISP (Static IP address
mode only). Inquire your local ISP if you are not clear.
4.3 LAN
Click “Advanced Settings”
----
“LAN Settings” to enter the interface below.
●
LAN MAC Address
:
Displays the router’s LAN MAC address, which
cannot be changed.
●
IP Address
: The default LAN IP address for this router is
192.168.1.1.
You can change it according to your need.
●
Subnet Mask
: Enter the Router’s LAN subnet mask. The default value is
255.255.255.0.
Note:
If you change the device’s LAN IP address, you must enter the new one in your
browser to get back to the web-based configuration utility. And
LAN PCs’ gat
eway
must be set to this new IP for successful Internet connection.
19216811.live