Page 56 / 70 Scroll up to view Page 51 - 55
150M Wireless-N Broadband Router
(iB-WRB150N)
55
Note:
If you enter 0.0.0.0 in the IP address box, then all PCs on Internet can
access your router’s Web
-based utility to view or change your settings remotely
once you enable the remote Web-based management feature
.
For example
: If you want to allow only a PC at the IP address of
218.88.93.33 to access your router’s web
-based utility from Internet via
port: 8080, you need to configure same settings shown in the diagram
above on your router. And what this IP user needs to do is to simply launch
a browser and enter http://220.135.211.56:8080 (provided that your
router’s WAN IP address is 220.135.211.56).
Page 57 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
56
Chapter 9 Routing Settings
9.1 Routing Table
This page displays the router’s core routing table which lists
destination IP address, subnet mask, gateway, hop count and interface.
The principal task for a router is to look for an optimal transfer path for
each data packet passing through it, and transfer it to the specified
destination. So, it’s essential for the router to select an optimal path, i.e.
routing algorithm. To complete this work, the router stores related data of
various transfer paths, i.e. establishing a routing table, for future route
selection.
9.2 Static Routing
You can use this section to set up router’s static routing feature.
Page 58 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
57
Destination Network IP Address
: Enter a destination IP address or
subnet.
Subnet Mask
: Enter a Subnet Mask that corresponds to destination IP
address or subnet you entered.
Gateway
: Next-hop IP address.
Note:
1. Gateway IP address must be on the same subnet with the router’s LAN/WAN
IP address.
2. If you want destination network to be a single host, then you must enter an IP
address thereof and 255.255.255.255 respectively in Destination Network IP
Address and Subnet Mask boxes.
3. If you want destination network to be a network, then you must enter an IP
address and a corresponding subnet mask value respectively in Destination
Network IP Address and Subnet Mask boxes. For example, if you enter 10.0.0.0 in
the IP address box, then corresponding subnet mask should be 255.0.0.0.
Page 59 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
58
Chapter 10 Maintenance
10.1 Time Settings
This section assists you in set
ting the device’s system time; you can
either select to set the time and date manually or automatically obtain the
GMT time from Internet.
Note
:
The configured time settings lose once the router is powered off. But it
obtains the GMT time automatically when you connect it to the Internet.
Features/functions based on time (e.g. security settings) take effect only after time
settings are configured manually or updated automatically from Internet.
10.2
DDNS
Dynamic DNS or DDNS is a term used for the updating in real time of
Internet Domain Name System (DNS) name servers. We use a numeric IP
address allocated by Internet Service Provider (ISP) to connect to Internet;
the address may either be stable ("static"), or may change from one
session on the Internet to the next ("dynamic"). However, a numeric
address is inconvenient to remember; an address which changes
unpredictably makes connection impossible. The DDNS provider allocates
a static hostname to the user; whenever the user is allocated a new IP
address this is communicated to the DDNS provider by software running
on a computer or network device at that address; the provider distributes
the association between the hostname and the address to the Internet's
DNS servers so that they may resolve DNS queries. Thus, uninterrupted
access to devices and services whose numeric IP address may change is
maintained.
Page 60 / 70
150M Wireless-N Broadband Router
(iB-WRB150N)
59
DDNS Service
: Click Enable or Disable radio button to enable/disable
the DDNS feature.
Service Provider
: Select your DDNS service provider from the
drop-down menu (Dyndns or no-ip).
Username
: Enter the DDNS username provided by your DDNS service
provider.
Password
: Enter the DDNS password provided by your DDNS service
provider.
Domain Name
: Enter the DDNS domain name distributed by your
DDNS service provider.
Username
Admin
Password
12345678
Domain Name
domain.no-ip.com
For example
: If you have registered a DDNS service in no-ip.com and are
allocated with domain, 12345678, domain.no-ip.com respectively as
username, password and domain name for a web server on your PC at
192.168.1.10, then configure port settings on port range forwarding
interface under virtual server menu and enter this information on the
above DDNS interface. Others can access your web server by simply
entering http://domain. no-ip.com in their browser address bar.

Rate

4.5 / 5 based on 2 votes.

Popular iBall Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top