1. Home
    2. /
  2. Manuals
    3. /
  3. iBall
    4. /
  4. iB-WRA150N
    5. /
  5. 8
Page 36 / 76 Scroll up to view Page 31 - 35
iB-WRA150N
150M Wireless-N ADSL2+ Router User Guide
•
Authentication Type:
Select an authentication type from the drop-down list, which
allows you to configure security features of the wireless LAN interface. Options available
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/
WPA2-PSK.
1)
WEP-64Bits
To configure WEP-64Bits settings, select the WEP-64Bits option from the drop-down list. The
menu will change to offer the appropriate settings. WEP-64Bits is a data privacy mechanism
based on a 64-bit shared key algorithm, as described in the IEEE 802.11g standard.
Figure 4-16
2)
WEP-128Bits
To configure WEP-128Bits settings, select the WEP-128Bits option from the drop-down list.
The menu will change to offer the appropriate settings. 128-bit is stronger than 64-bit.
Figure 4-17
32
Page 37 / 76
iB-WRA150N
150M Wireless-N ADSL2+ Router User Guide
3)
WPA-PSK
To configure WPA-PSK settings, select the WPA-PSK option from the drop-down list. The
menu will change to offer the appropriate settings. WPA-PSK requires a shared key and does
not use a separate server for authentication. PSK keys can be ASCII or Hex type.
Figure 4-18
¾
Encryption:
Select the encryption you want to use: TKIP/AES, TKIP or AES (AES is an
encryption method stronger than TKIP).
•
TKIP
(
T
emporal
K
ey
I
ntegrity
P
rotocol) - a wireless encryption protocol that provides
dynamic encryption keys for each packet transmitted.
•
AES
(
A
dvanced
E
ncryption
S
tandard) - A security method that uses symmetric
128-bit block data encryption.
¾
Pre-Shared Key:
Enter the key shared by the Router and your other network devices. It
must have 8-63 ASCII characters or 64 Hexadecimal digits.
4)
WPA2-PSK
To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The
menu will change to offer the appropriate settings. WPA2-PSK requires a shared key and
does not use a separate server for authentication. PSK keys can be ASCII or Hex type.
Figure 4-19
33
Page 38 / 76
iB-WRA150N
150M Wireless-N ADSL2+ Router User Guide
5)
WPA-PSK/WPA2-PSK
To configure WPA-PSK/WPA2-PSK settings, select the WPA-PSK/WPA2-PSK option from
the
drop-down
list.
The
menu
will
change
to
offer
the
appropriate
settings.
WPA-PSK/WPA2-PSK requires a shared key and does not use a separate server for
authentication. PSK keys can be ASCII or Hex type. WPA-PSK/WPA2-PSK is more flexible
than WPA-PSK or WPA2-PSK.
Figure 4-20
¾
WPS Settings:
WPS can help you to add a new wireless device to an existing network
quickly. This section will guide you how to use WPS function.
•
WPS state:
Display the current WPS state.
•
WPS mode:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless adapter and Router using either Push
Button Configuration (PBC) method or PIN method, please select the one you want.
•
WPS progress:
Show the current WPS progress.
•
Reset WPS:
Use this button to reset the WPS state to “Unconfigured”, so that a new key
will be created when using WPS function next time.
1)
PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods. Click
PBC
, you will see the screen as shown below.
Figure 4-21
34
Page 39 / 76
iB-WRA150N
150M Wireless-N ADSL2+ Router User Guide
Method One:
Step 1:
Press the WPS button on the front panel of the Router or click
Start WPS
button in
Figure 4-21.
Step 2:
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3:
Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
Method Two:
Step 1:
Press the WPS button on the front panel of the Router or click
Start WPS
button in
Figure 4-21.
Step 2: For the configuration of the wireless adapter, please choose “
Push the button on
my access point
”
in the
configuration utility of the WPS as below, and click
Next
.
35
Page 40 / 76
iB-WRA150N
150M Wireless-N ADSL2+ Router User Guide
The WPS Configuration Screen of Wireless Adapter
Step 3:
Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
36

Rate

4 / 5 based on 1 vote.

Popular iBall Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top