iB-WRA150N

150M Wireless-N ADSL2+ Router User Guide

Step 2:

Select the

IP/MAC Filter Set Index

and

IP/MAC Filter Rule Index

for the rule, then

select the Interface “PVC0”, and select the Direction “Outgoing” for the first rule.

)

Note:

If you want to make the rule take effect, please select

Yes

to active the rule.

Step 3:

Enter the “MAC Address” and select the Unmatched rule as “Next”.

Step 4:

Finally, click the

SAVE

to save the entry.

Step 5:

Go to Step 2 to configure the next rule: Block the PC with MAC address

00-0A-EB-00-07-5F to access the Internet.

)

Note:

After you complete the MAC filter rules for the example, the Filter list will show as follows. You can

enter the

IP / MAC Filter Set Index

to view the information about the rule.

Other operations for the entries as shown in Figure 4-39:

Select the

IP / MAC Filter Set Index

and

IP/MAC Filter Rule Index

to view or modify the entry.

Select the

IP / MAC Filter Set Index

and

IP/MAC Filter Rule Index

to locate the specific rule, and

then click the

DELETE

button to delete the entry.

4.5.2.3. Application Filter

Select

Application Filter

as the Filter type (shown in Figure 4-41), and then you can configure the

filter rules based on application.

57

iB-WRA150N

150M Wireless-N ADSL2+ Router User Guide

Figure 4-41

¾

Filter Type Selection:

Select the Application Filter for the next configuration.

¾

Application Filter:

Activate or deactivate the function.

¾

ICQ & MSN & Real Audio/Video:

Select

Allow

or

Deny

for these applications.

If you select

Allow,

the Router will accept the application; if you select Deny, the Router will forbid the

application.

4.5.2.4. URL

Select

Application Filter

as the Filter type (shown in Figure 4-42), and then you can configure the

filter rules based on URL.

Figure 4-42

¾

Filter Type Selection:

Select the URL Filter for the next configuration.

¾

Active:

Select “Yes” to make the rule to take effect.

58

iB-WRA150N

150M Wireless-N ADSL2+ Router User Guide

¾

URL Index:

Select the index for the URL Filter entry.

¾

URL:

Enter the URL for this URL Filter.

¾

URL Filter Listing:

This displays the information about the URL Filter rules.

To add a URL filter entry:

For example:

If you want to forbid the user to access the website:

www.yahoo.com

. Presume the

rule is aimed at the interface PVC0, and its index is “1”.

Step 1:

Select the “URL Filter” as the Filter Type Selection (show in Figure 4-42).

Step 2:

Select the Index for the rule, and then enter the website in the URL field.

Step 3:

Finally, Select

Yes

to active the rule, and then click the

SAVE

to save the entry.

Other operations for the entries as shown in Figure 4-39:

Select the

URL Index

to view or modify the entry.

Select the

URL Index

to locate the specific rule, and then click the

DELETE

button to delete the

entry.

4.5.3 SNMP

Choose “

Access Management

→

SNMP

” menu, you can see the SNMP screen. The Simple

Network Management Protocol (SNMP) is used for exchanging information between network

devices.

Figure 4-43

¾

Get Community:

Set the password for the incoming Get and Get next requests from the

management station.

¾

Set Community:

Set the password for incoming Set requests from the management station.

59

iB-WRA150N

150M Wireless-N ADSL2+ Router User Guide

4.5.4 UPnP

Choose “

Access Management

→

UPnP

” menu, you can configure the UPnP in the screen

(shown in Figure 4-44).

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for

simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join

a network, obtain an IP address, convey its capabilities and learn about other devices on the

network. In turn, a device can leave a network smoothly and automatically when it is no longer in

use. UPnP broadcasts are only allowed on the LAN.

Figure 4-44

¾

UPnP:

Activate or Deactivate the UPnP function. Only when the function is activated, can the

UPnP take effect.

¾

Auto-Configure:

If you activate the function, then the UPnP network devices can

automatically configure network addressing, announce their presence in the network to other

UPnP devices and enable exchange of simple product and service descriptions.

4.5.5 DDNS

Choose “

Access Management

→

DDNS

” menu, you can configure the DDNS function in the

screen (shown in Figure 4-45).

The router offers a Dynamic Domain Name System (

DDNS

) feature. The feature lets you use a

static host name with a dynamic IP address. User should type the host name, user name and

password assigned to your ADSL Router by your Dynamic DNS provider. User also can decide to

turn on DYNDNS Wildcard or not.

60

iB-WRA150N

150M Wireless-N ADSL2+ Router User Guide

Figure 4-45

¾

Dynamic DNS:

Activate the DDNS function or not.

¾

Service Provider:

This field displays the service provider of DDNS.

¾

My Host Name:

Enter your host name here.

¾

E-mail Address:

Enter your E-mail address here.

¾

Username & Password:

Type the “User Name” and “Password” for your DDNS account.

¾

Wildcard support:

Select the option to use Wildcard function

4.5.6 CWMP

Choose “

Access Management

→

CWMP

” menu, you can configure the CWMP function in the

screen (shown in Figure 4-46).

The router offers CWMP feature. The function supports TR-069 protocol which collects information,

diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration

Server).

61