Hitron Technologies BVW-3653 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 106 Scroll up to view Page 31 - 35

36

HITRON BVW-3653 USER’S GUIDE

CABLE

FIGURE 9:

The Cable > Event Log Screen

The following table describes the labels in this screen.

2.6

THE PASSWORD SCREEN

Use this screen to change the password with which you log in to the BVW-3653.

NOTE:

If you forget your password, you will need to reset the BVW-3653 to its factory

defaults.

Click

Cable

>

Password

. The following screen displays.

TABLE 9:

The Cable > Event Log Screen

Index

This displays the incremental identification number

assigned to the logged event.

Date/Time

This displays the date and time at which the event that

triggered the log entry occurred.

ID

This displays

cmstatus

(cable modem status).

Level

This displays the severity level of the event that

triggered the log entry. Possible levels (in order of

severity) are:

±

Error

±

Warning

±

Critical

Text

This displays automatically-generated specific

information about the event that triggered the log entry.

Clear Log

Click this to remove all entries from the log. Deleted log

entry data cannot be retrieved.

Help

Click this to see information about the fields in this

screen.

Page 37 / 106

37

HITRON BVW-3653 USER’S GUIDE

CABLE

FIGURE 10:

The Cable > Password Screen

The following table describes the labels in this screen.

TABLE 10:

The Cable > Password Screen

Enter Current Password

Enter the password with which you currently log into the

BVW-3653

Enter New Password

Enter and re-enter the password you want to use to log

into the BVW-3653.

Re-Enter New Password

Password Idle Time

Enter the number of minutes of inactivity after which you

should be automatically logged out of the BVW-3653.

Once this period elapses, you will need to log in again.

Apply

Click this to save your changes to the fields in this

screen.

Cancel

Click this to return the fields in this screen to their last-

saved values without saving your changes.

Help

Click this to see information about the fields in this

screen.

Page 38 / 106

38

HITRON BVW-3653 USER’S GUIDE

CABLE

Page 39 / 106

39

LAN

3

LAN

This chapter describes the screens that display when you click

LAN

in the toolbar.

3.1

LAN OVERVIEW

This section describes some of the concepts related to the

LAN

screens.

3.1.1

LOCAL AREA NETWORKS

A Local Area Network (LAN) is a network of computers and other devices that usually

occupies a small physical area (a single building, for example). Your BVW-3653’s

LAN consists of all the computers and other networking devices connected to the

LAN 1

~

4

ports. This is your private network (in routing mode - see

Routing Mode

on

page

28

).

The LAN is a separate network from the Wide Area Network (WAN). In the case of

the BVW-3653, the WAN refers to all computers and other devices available on the

cable (

CATV

) connection.

By default, computers on the WAN cannot identify individual computers on the LAN;

they can see only the BVW-3653. The BVW-3653 handles routing to and from

individual computers on the LAN.

3.1.2

LAN IP ADDRESSES AND SUBNETS

IP addresses on the LAN are controlled either by the BVW-3653’s built-in DHCP

server (see

DHCP

on page

27

), or by you (when you manually assign IP addresses

to your computers).

For more information about IP addresses and subnets in general, see

IP Addresses

and Subnets

on page

25

.

Page 40 / 106

40

HITRON BVW-3653 USER’S GUIDE

LAN

3.1.3

DOMAIN SUFFIX

A domain is a location on a network, for instance

example.com

. On the Internet,

domain names are mapped to the IP addresses to which they should refer by the

Domain Name System. This allows you to enter “www.example.com” into your

browser and reach the correct place on the Internet even if the IP address of the

website’s server has changed.

Similarly, the BVW-3653 allows you to define a

Domain Suffix

to the LAN. When you

enter the domain suffix into your browser, you can reach the BVW-3653 no matter

what IP address it has on the LAN.

3.1.4

DEBUGGING (PING AND TRACEROUTE)

The BVW-3653 provides a couple of tools to allow you to perform network

diagnostics on the LAN:

±

Ping: this tool allows you to enter an IP address and see if a computer (or other

network device) responds with that address on the network. The name comes

from the pulse that submarine SONAR emits when scanning for underwater

objects, since the process is rather similar. You can use this tool to see if an IP

address is in use, or to discover if a device (whose IP address you know) is

working properly.

±

Traceroute: this tool allows you to see the route taken by data packets to get

from the BVW-3653 to the destination you specify. You can use this tool to solve

routing problems, or identify firewalls that may be blocking your access to a

computer or service.

3.2

THE LAN IP SCREEN

Use this screen to:

±

Configure the BVW-3653’s LAN IP address, subnet mask and domain suffix

±

Configure the BVW-3653’s internal DHCP server

±

See information about the network devices connected to the BVW-3653 on the

LAN.

Click

LAN

>

LAN IP

. The following screen displays.

Rate

Popular Hitron Technologies Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share