Page 31 / 135 Scroll up to view Page 26 - 30
SETUP WIZARD
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
5
Hitron CGNM/ CGNM-3552 User’s Guide
The following table describes the labels in this screen.
2.6
The Summary Screen
Use this screen to view the CGNM/ CGNM-3552’s settings.
Click
Next
in the
Quick Wizard: Wireless Settings
screen. The following screen
displays.
Table 7:
The Setup Wizard: Wireless Settings Screen
Primary SSID
Enter the name that you want to use for your CGNM/
CGNM-3552’s wireless network. This is the name that
identifies your network, and to which wireless clients
connect.
Security Type
Use this field to apply security encryption to your
wireless network.
Select
Open
to use no wireless security. Anyone
can join the network.
Select
Encrypted
to require people who want to
access your wireless network to use a password.
Then, enter the password you want to use in the
Security Key
field that displays.
Exit
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Prev
Click this to return to the previous screen.
Next
Click this to continue to the next screen.
Page 32 / 135
SETUP WIZARD
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
6
Hitron CGNM/ CGNM-3552 User’s Guide
Figure 11:
The Setup Wizard: Summary Screen
If you are happy with the settings, click
Finish
. The following confirmation message
displays.
Figure 12:
The Setup Wizard: Summary Screen
NOTE:
If you changed the
Primary SSID Name
or
Wireless Secure Key
, make
sure you keep a note of the new details.
Alternatively, click
Prev
to make further changes to the wizard’s fields.
Page 33 / 135
STATUS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
1
Hitron CGNM/ CGNM-3552 User’s Guide
3
Status
This chapter describes the screens that display when you click
Status
in the toolbar.
It contains the following sections:
Status Overview
on page
1
The Overview Screen
on page
9
The System Information Screen
on page
13
The DOCSIS Provisioning Screen
on page
15
The DOCSIS WAN Screen
on page
16
The DOCSIS Event Screen
on page
19
The Wireless Screen
on page
21
The MoCA Screen
on page
24
3.1
Status Overview
This section describes some of the concepts related to the
Status
screens.
3.1.1
DOCSIS
The Data Over Cable Service Interface Specification (DOCSIS) is a
telecommunications standard that defines the provision of data services) Internet
access) over a traditional cable TV (CATV) network.
Your CGNM/ CGNM-3552 supports DOCSIS version 3.0.
Page 34 / 135
STATUS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
2
Hitron CGNM/ CGNM-3552 User’s Guide
3.1.2
IP Addresses and Subnets
Every computer on the Internet must have a unique Internet Protocol (IP) address.
The IP address works much like a street address, in that it identifies a specific
location to which information is transmitted. No two computers on a network can have
the same IP address.
3.1.2.1
IP Address Format
IP addresses consist of four octets (8-bit numerical values) and are usually
represented in decimal notation, for example
192.168.1.1
. In decimal notation, this
means that each octet has a minimum value of 0 and a maximum value of 255.
An IP address carries two basic pieces of information: the “network number” (the
address of the network as a whole, analogous to a street name) and the “host ID”
(analogous to a house number) which identifies the specific computer (or other
network device).
3.1.2.2
IP Address Assignment
IP addresses can come from three places:
The Internet Assigned Numbers Agency (IANA)
Your Internet Service Provider
You (or your network devices)
IANA is responsible for IP address allocation on a global scale, and your ISP assigns
IP addresses to its customers. You should never attempt to define your own IP
addresses on a public network, but you are free to do so on a private network.
In the case of the CGNM/ CGNM-3552:
The public network (Wide Area Network or WAN) is the link between the cable
connector and your Internet Service Provider. Your CGNM/ CGNM-3552’s IP
address on this network is assigned by your service provider.
Page 35 / 135
STATUS
Version 2.0, 07/2015. Copyright
2015 Hitron Technologies
3
Hitron CGNM/ CGNM-3552 User’s Guide
The private network (in routing mode - see
Routing Mode
on page
6
) is your
Local Area Network (LAN) and Wireless Local Area Network (WLAN), if
enabled. You are free to assign IP addresses to computers on the LAN and
WLAN manually, or to allow the CGNM/ CGNM-3552 to assign them
automatically via DHCP (Dynamic Host Configuration Protocol). IANA has
reserved the following blocks of IP addresses to be used for private networks
only:
If you assign addresses manually, they must be within the CGNM/ CGNM-
3552’s LAN subnet.
3.1.2.3
Subnets
A subnet (short for sub-network) is, as the name suggests, a separate section of a
network, distinct from the main network of which it is a part. A subnet may contain all
of the computers at one corporate local office, for example, while the main network
includes several offices.
In order to define the extent of a subnet, and to differentiate it from the main network,
a subnet mask is used. This “masks” the part of the IP address that refers to the main
network, leaving the part of the IP address that refers to the sub-network.
Each subnet mask has 32 bits (binary digits), as does each IP address:
A binary value of
1
in the subnet mask indicates that the corresponding bit in the
IP address is part of the main network.
A binary value of
0
in the subnet mask indicates that the corresponding bit in the
IP address is part of the sub-network.
For example, the following table shows the IP address of a computer (
192.168.1.1
)
expressed in decimal and binary (each cell in the table indicates one octet):
Table 8:
Private IP Address Ranges
FROM...
...TO
10.0.0.0
10.255.255.255
172.16.0.0
172.31.255.255
192.168.0.0
192.168.255.255
Table 9:
IP Address: Decimal and Binary
192
168
0
1
11000000
10101000
00000000
00000001

Rate

4.3 / 5 based on 3 votes.

Popular Hitron Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top