Hawking HD45R Router Manual PDF (Setup & Configuration Guide)

Page 141 / 151 Scroll up to view Page 136 - 140

140

Click ‘Browse’ button first, you’ll be prompted to provide the filename of

firmware upgrade file. Please download the latest firmware file from our

website, and use it to upgrade your router.

After a firmware upgrade file is selected, click ‘Apply’ button, and the router

will start firmware upgrade procedure automatically. The procedure may

take several minutes, please be patient.

NOTE: Never interrupt the upgrade procedure by closing the web

browser or physically disconnect your computer from router. If the

firmware you uploaded is corrupt, the firmware upgrade will fail, and

you may have to return this router to the dealer of purchase to ask for

help. (Warranty voids if you interrupted the upgrade procedure).

Page 142 / 151

141

3-5-3 System Reset

If you think the network performance is bad, or you found the behavior of

the router is strange, you can perform a router reset, sometime it will solve

the problem.

To do so, please click ‘Tool’ located at the upper-right corner of web

management interface, then click ‘Reset’ on the left of web management

interface, then the following message will be displayed on your web

browser:

Please click ‘Apply’ to reset your router, and it will be available again after

few minutes, please be patient.

Page 143 / 151

142

Chapter IV: Appendix

4-1 Hardware Specification

SOC+RF:

Ralink RT3883 (CPU+5GHz) + RT3092 (2.4GHz)

Gigabit Switch:

Realtek RTL8367R

Flash:

8MB Parallel Flash

RAM:

64MB DDR2 RAM

WAN Port:

10/100/1000M (Auto-MDI/MDI-X) UTP Port x 1

LAN Ports:

10/100/1000M (Auto-MDI/MDI-X) UTP Port x 4

MIMO Technology:

5GHz: 3T3R MIMO, 2.4GHz: 2T2R MIMO

Antenna:

3dBi Dual Band Fixed Dipole Antenna x 3 (3T3Rfor 5GHz and 2T2R for 2.4GHz)

Output Power:

2.4GHz

11b(11Mbps): 18±1.5dBm

11g(54Mbps): 17±1.5dBm

11n(20MHz, MCS15): 17±1.5dBm

11n(40MHz, MCS15): 16±1.5dBm

5GHz

11a(54Mbps): 15±1.5dBm

11n(20MHz, MCS23): 14±1.5dBm

11n(40MHz, MCS23): 14±1.5dBm

Receive Sensitivity:

2.4GHz

11b(11Mbps): -86dBm±2dBm

11g(54Mbps): -72dBm±2dBm

11n(20MHz, MCS15): -66dBm±2dBm

11n(40MHz, MCS15): -63dBm±2dBm

5GHz

11a(54Mbps): -72dBm±2dBm

11n(20MHz, MCS23): -66dBm±2dBm

11n(40MHz, MCS23): -63dBm±2dBm

Power:

12V, 1.25A Switch Power Adapter

Dimension:

32(H) x 180(W) x 118(D) mm

Temperature Operating:

0~40

o

C, Storage: -20~60

o

C

Page 144 / 151

143

Humidity Operating:

Operating: 10~90% (Non Condensing), Storage: Max.95% (Non

Condensing)

Page 145 / 151

144

4-2 Troubleshooting

If the router is working improperly or stops, please refer to the follow

solutions.

Scenario

Solution

Router is not

responding to me

when I want to access

it by web browser

a.

Please check the connection of power cord

and network cable of this router. All cords

and cables should be correctly and firmly

inserted to the router.

b.

If all LEDs on this router are off, please

check the status of A/C power adapter, and

make sure it’s correctly powered.

c.

You must use the same IP address section

which router uses.

d.

Are you using MAC or IP address filter?

Try to connect the router by another

computer and see if it works; if not, please

restore your router to factory default

settings (pressing ‘reset’ button for over 10

seconds).

e.

Set your computer to obtain an IP address

automatically (DHCP), and see if your

computer can get an IP address.

f.

If you did a firmware upgrade and this

happens, contact your dealer of purchase for

help.

g.

If all above solutions don’t work, contact

the dealer of purchase for help.

Can’t get connected to

Internet

a.

Go to ‘Status’ -> ‘Internet Connection’

menu, and check Internet connection status.

b.

Please be patient, sometime Internet is just

that slow.

c.

If you connect a computer to Internet

directly before, try to do that again, and

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share