Page 31 / 237
Scroll up to view Page 26 - 30
OxyGEN
mini
Office
Administrator’s Guide
Note
During the boot-sequence of the OxyGEN miniOffice, the
Alarm
LED is solid Amber. The
device is ready for operation when the LED is off.
Step 4. Configure your PC
You may now have to configure the Internet properties on your Ethernet PC. See
Configuring Ethernet
PCs
on page 183, if using a wired Ethernet connection, or
Configuring Wireless PCs
on page 186, if
planning to use a wireless one
(WiFi-enabled devices only)
.
Next Step
After setting up the OxyGEN
mini
Office and configuring your PC, you can log on to the device by
following the instructions in
Getting Started with the Web Pages
on page 33. Using the Web Configuration
tool you will be able to setup all the functionality related to your Internet service.
This guide includes also a chapter called
Troubleshooting
(page 175), which enables you to find
solutions to common problems that hinder your device from working properly.
Gennet s.a.
31
Page 33 / 237
4
Getting Started with the Web Pages
The OxyGEN
mini
Office includes a web configuration tool that provides an interface to the software
installed on the device.
It enables you to configure the device settings to meet the needs of your
network. You can access it through a web browser on a PC connected to the device.
Note
Some screens, icons, messages, and colors of the information shown in your device may
be different from the information presented in this manual, due to the capabilities of the
exact model you are using and due to customization decided by your ISP. The same
applies to the device default settings, default passwords and the existence or absence
of certain menus, sub-menus or options, which again have been decided in accordance
with your ISP policies.
33
Page 34 / 237
OxyGEN
mini
Office
Administrator’s Guide
Accessing the Web Pages
To access the web pages, you need the following:
1. A laptop or PC connected to the LAN port on the device.
2. A JavaScript enabled web browser installed on the PC. The minimum browser version requirement
is Microsoft Internet Explorer version 5.5 or newer, Mozilla Firefox 1.5 or newer, Google Chrome,
Apple Safari version 1.2 or newer.
3. Launch your web browser, type
http://oxygen.lan
or
in the web address
(or location) box, and press
[
Enter
]
on your keyboard.
4. An access control screen appears. Enter the correct username and password.
The default username and password combination is
admin
and
admin
respectively.
Figure 4.1: Web Configuration Login
Note
OxyGEN miniOffice offers two different levels of administration profiles: simple user mode
(default username/password combination is
user/user
), and administrator mode (default
username/password combination is
admin/admin
).
5. After successful login, the home page opens displaying the
System View
page with an overview
of the device:
Gennet s.a.
34
Page 35 / 237
OxyGEN
mini
Office
Administrator’s Guide
Figure 4.2: Initial System View - Home
Gennet s.a.
35
19216811.live